Package I Repair work of Ceiling Narasingapuram PUE School (Two Class Room), Keelaesanai PUE School (Three Class Room), Chinnapattakadu PUE School (Three Class Room), Periyapattakadu PUE School (Two Class Room) in Chinnapattakadu and Kovilur PUE

Amount

Part I - Repairs to ceiling at Narasingapuram PUE School (Two Class Room) in Chinnapattakadu Panchayat

Clean removal of cement plaster from walls including all labour charges etc. complete

Supplying and applying of two coats of putty of 3 mm thick over the exposed RCC Surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. ( The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade. labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth. etc., complete). The putty should be got approved by the Executive Engineer before use on work.

Repairs to ceiling at Keelaesanai PUE School (Three Class Room) in Chinnapattakadu Panchayat

Clean removal of cement plaster from walls including all labour charges etc. complete

Supplying and applying of two coats of putty of 3 mm thick over the exposed RCC Surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. ( The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade. labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth. etc., complete). The putty should be got approved by the Executive Engineer before use on work.

Repairs to ceiling at Chinnapattakadu PUE School (Three Class Room) in Chinnapattakadu Panchayat

Clean removal of cement plaster from walls including all labour charges etc. complete

Supplying and applying of two coats of putty of 3 mm thick over the exposed RCC Surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. ( The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade. labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth. etc., complete). The putty should be got approved by the Executive Engineer before use on work.

Repairs to ceiling at Periyapattakadu PUE School (Two Class Room) in Chinnapattakadu Panchayat

Clean removal of cement plaster from walls including all labour charges etc. complete

Supplying and applying of two coats of putty of 3 mm thick over the exposed RCC Surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. ( The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade. labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth. etc., complete). The putty should be got approved by the Executive Engineer before use on work.

Repairs to ceiling at Kovilur PUE School (Two Class Room ) in Kovilur Panchayat

Clean removal of cement plaster from walls including all labour charges etc. complete

Supplying and applying of two coats of putty of 3 mm thick over the exposed RCC Surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. ( The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade. labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth. etc., complete). The putty should be got approved by the Executive Engineer before use on work.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Prabhaharan (BID ID -1521066)