MISC. WORKS TENDER AT BPPL PROJECT SV_IP_DT

SPLY & INSTLN OF LED LIGHT — PPLY AND INSTALLATION OF 45 WATT LED IN STREETLIGHTING LUMINARY. IP 65 INTEGRAL LED STREETLIGHT FIXTURES SUITABLE FOR 40 X 1.2 W T LEDAPPROVED EQUIVALENT ALL COMPLETE AS PERSPECIFICATION AND DIRECTION OF ENGINEER-IN-CHARGE.

SPLY AND LAYG OF PAVER — VER BLOCK PROVIDING AND LAYING APPROVEDBRAND/MAKE 80MM THICKNESS CEMENT COLOURED PAVINGBLOCKS OF M 40 GRADE OVER A BED OF 50MM T CKNESSWELL COMPACTED RIVER SAND BED LAID OVER WELLPREPARED SUB BASE TO THE REQUIRED LINE AND LEVELINCLUDING ALL MATERIALS, LAB R, MACHINERY,TRANSPORTATION ETC., PAVING BLOCKS SHOULD HAVECHAMFERED TOP EDGES OF NOT LESS THAN 4MM ANDSHALL BE LAID AND INTER CKED WITH A MINIMUM OF2MM GAP WHICH IN TURN PACKED WITH RIVER SAND,COMPACTING WITH PLATE VIBRATOR ETC. COMPLETE.EDGE RESTRAINT ITH RCC 1:2:4 WILL BE PAIDSEPARATELY.

SPLY & CONST OF BRICK — OVIDING AND CONSTRUCTING BRICK MASONRY INCEMENT MORTAR 1:5 USING BRICKS OF WITH MIN COMP.STRENGTH OF 60 KG/CM2 AND CONFORMING TO S-1077(LATEST REVISION) IN DRAINS, WALLS, PEDESTALS,KERBS ETC. INCLUDING PROVIDING ALL OPENINGS ANDPROJECTIONS, RAKING THE JOI TO 1 CM DEEP,SCAFFOLDING, SOAKING THE BRICKS IN WATER PRIOR TOUSE AND CURING ETC. COMPLETE AS PER ATTACHEDTECHNICAL SPECIFICA ON/CODAL PROVISIONS/SOUNDENGINEERING PRACTICES AND AS DIRECTED BY EIC. JOBTO BE COMPLETED AS PER STANDARD SPECIFICATION FORBRI MASONRY AS ATTACHED UNDER TECHNICALSPECIFICATIONS OF TENDER AND AS DIRECTED BY EICCOMPLETE.

SPLY & FIXG OF ALUMINIUM — OVIDING AND FIXING ALUMINIUM WORK FOR DOORS,WINDOWS, VENTILATORS AND PARTITIONS WITH EXTRUDEDBUILT UP STANDARD TUBULAR SECTIONS/ PROPRIATE ZSECTIONS AND OTHER SECTIONS OF APPROVED MAKECONFORMING TO IS:733 AND IS:1285, FIXING WITHDASH FASTENERS OF REQUIRED IA AND SIZE,INCLUDING NECESSARY FILLING UP THE GAPS ATJUNCTIONS, I.E. AT TOP, BOTTOM AND SIDES WITHREQUIRED EPDM RUBBER/NEOPRE GASKET ETC.ALUMINIUM SECTIONS SHALL BE SMOOTH, RUST FREE,STRAIGHT, MITRED AND JOINTED MECHANICALLYWHEREVER REQUIRED INCLUDING LEAT ANGLE,ALUMINIUM SNAP BEADING FOR GLAZING/PANELING, C.P.BRASS/STAINLESS STEEL SCREWS, ALL COMPLETE AS PERARCHITECTURAL DRA NGS AND THE DIRECTIONS OF THEENGINEER-IN-CHARGE. (GLAZING, PANELING AND DASHFASTENERS TO BE PAID FOR SEPARATELY):FOR FIXEDPORT N:ANODISED ALUMINIUM (ANODISED TRANSPARENTOR DYED TO REQUIRED SHADE ACCORDING TO IS:1868,MINIMUM ANODIC COATING OF GRADE AC 15).

PF CPVC32MM D PIPE — OVIDING AND FIXING CHLORINATED POLYVINYLCHLORIDE (CPVC) PIPES, HAVING THERMAL STABILITYFOR HOT & COLD WATER SUPPLY, INCLUDING AL CPVCPLAIN & BRASS THREADED FITTINGS, INCLUDING FIXINGTHE PIPE WITH CLAMPS AT 1.00 M SPACING. THISINCLUDES JOINTING OF PIPES & TTINGS WITH ONESTEP CPVC SOLVENT CEMENT AND TESTING OF JOINTSCOMPLETE AS PER DIRECTION OF ENGINEER IN CHARGE:32MM NOMINAL OUTE DIA PIPES

P/F CPVC 32MM D — OVIDING AND FIXING CHLORINATED POLYVINYLCHLORIDE (CPVC) PIPES, HAVING THERMAL STABILITYFOR HOT & COLD WATER SUPPLY, INCLUDING AL CPVCPLAIN & BRASS THREADED FITTINGS, I/C FIXING THEPIPE WITH CLAMPS AT 1.00 M SPACING. THIS INCLUDESJOINTING OF PIPES & FITTIN WITH ONE STEP CPVCSOLVENT CEMENT AND THE COST OF CUTTING CHASES ANDMAKING GOOD THE SAME INCLUDING TESTING OF JOINTSCOMPLETE A PER DIRECTION OF ENGINEER IN CHARGE.CONCEALED WORK INCLUDING CUTTING CHASES ANDMAKING GOOD THE WALLS ETC: 32MM NOMINAL OUTER DIA PIPES

SPLY AND LAYG OF RCC M- — OVIDING AND LAYING REINFORCED CEMENT CONCRETEOF M-30 GRADE RMC CONCRETE WITH 20 MM AND DOWNSIZE GRADED CRUSHED STONE AGGREGATES R ALLTYPES OF WORKS E.G FOUNDATIONS, RAFTS, BEAMS,SLABS, PILE CAPS, RETAINING WALLS, JAMBBS,COUNTER FORTS, BUTTRESSES, TRENCHE MANHOLES,PIPE ENCASEMENT, CATCH PITS, DRAINS, RCC PITS,EQUIPMENT/MACHINE FOUNDATIONS, PEDESTALS, PIPESLEEPERS, COLUMNS, SUSPE ED FLOORS, STAIR CASES,LANDINGS, STEPS, BRACKETS ETC, INCLUDING COST OFADMIXTURES IF USED, VIBRATING, TAMPING, CURINGAND RENDE NG IF REQUIRED TO GIVE SMOOTH AND EVENSURFACE ETC. (EXCLUDING COST OF REINFORCEMENT ANDSHUTTERING) AT ALL LEVELS INCLUDING PUMPI ANDPIPING IN ANY SHAPE, POSITION AND THICKNESS ETC.ALL COMPLETE AS SPECIFIED, SHOWN, DIRECTED. ALLMATERIALS INCLUDING CEMENT PPLIED BY THECONTRACTOR MINIMUM CEMENT CONTENT SHALL BE 410KG/M3.

PIPE,RCC,300MM — PE,NON-METALLIC; TYPE:HUME; MATERIAL SPEC:N/A;MATERIAL:REINFORCED CEMENT CONCRETE; PRESSURERATING:NP3; WALL THICKNESS:N/A; DIAME R,OD:N/A;SIZE (NB):300 MM; ADDITIONAL INFORMATION:IS 458;AS PER TENDER SPECIFICATIONS AND APPROVEDDATASHEETS

SUP & LAY - PIPERCC — ME PIPE-NP2, SUPPLYING, LAYING, JOINING ANDALIGNING RCC HUME PIPES CONFORMING TO IS-458LATEST EDITION BELOW APPROACH ROAD AS DIR TED.RATE TO INCLUDE JOINING WITH CEMENT MORTAR,EXCAVATION UP TO REQUIRED DEPTH AND PROVIDING ANDLAYING PCC 1:2:4 HAUNCHING AT M C/C, ALSOINCLUDING CUTTING, BENDING AND SUPPLY AND LAYINGOF 17 SWG ANNEALED BINDING WIRE INSIDE THE HUMEPIPE FOR PULLING CAB S IN FUTURE. TESTCERTIFICATES FROM MANUFACTURE SHALL BE SUBMITTEDAND APPROVED BY EIC BEFORE USE HUME PIPES-150 MMDIAMETER. NP2 LASS. END OF LAID HUME PIPE NEEDSTO BE SEALED PROPERLY WITH BRICK AND CEMENTMOTOR. VENDOR HAS TO SUPPLY AND INSTALLCOLLARS/OTH NECESSARY MATERIALS FOR CONNECTIONS.

STONE PITCHING — PPLYING & LAYING RANDOM RUBBLE PITCHING 300MMTHICK IN 1:6 CEMENT MORTAR (1CEMENT: 6 COARSESAND)WITH STONES OF 150MM TO 200MM SIZ FOREMBANKMENTS, ROAD SIDE SLOPES, HOLDING PONDS,BUNDS, DRAINS, CHANNELS OR AT ANY OTHER PLACE ASDIRECTED INCLUDING COST OF STO S, ALL ROYALTIES& TAXES, TRANSPORTATION TO SITE WITH ALL LEADSAND LIFTS, DRESSING, PREPARATION OF SUBGRADE FORPITCHING, FLUSH INTING IN 1:4 CEMENT MORTAR (1CEMENT: 4 SAND), CURING ETC. COMPLETE AS PERDRAWINGS, SPECIFICATIONS AND DIRECTIONS OFENGINEER-I CHARGE. ON HORIZONTAL/ SLOPEDSURFACES (ALL MATERIALS INCLUDING CEMENT SUPPLIEDBY CONTRACTOR)