Interior Decorative Spatial Aesthetic Design of Chief Engineer Room, Executive Engineer Room 01 02 in Third Floor High roof of New Corporation Office Builidng Zone 04 in Tambaram City Municipal Corporation

Gypsum False Celling: Providing and fixing 12.5mm thick Gypsum Board ceiling as per the design approved by the Architect or site authority, surfaces in plain including G.I. suspenders forming a grid of intermediate channel with ceiling sections fixed at right angle to the underside of intermediate channels with connecting clips complete as per India Gypsum Technical Manual including finishing with jointing compound and joint paper tapes and fixing of perimeter channel at both ends. Vertical edges to be provided & given Plaster of Paris cornice of approved design of 150x150mm using best quality Plaster of Paris. The rate shall also include cutting the Gypsum board for light fixtures / A.C. diffusers etc. and providing necessary and additional frame work for fixing the same. Wherever perimeter channels are cut in this process, additional support shall be made for proper stability without any extra cost.

Grid False Celling: Supplying and installing acoustical false ceiling using 0.3 mm thick T15 metal grid system, 600 x 600 mm module, with mineral fibre or GRG core tiles 595 x 595 x 15 mm, NRC not less than 0.5, complete with all materials, labour, and accessories as per data and as directed by the Engineer-in-Charge.

Paint Finish (Ceiling / Wall): Supply and painting emulsion with 1 coat of primer 2 coats for wall putty for levelling, sanding and 2 coats of colour paint as per the design approved by the architect or site incharge including labor material, cleaning, scrubbing, tools, sanding, masking tape, scaffolding and complete works.

Window Blinds: Supply and installation of zebra type adjustable vinyl make stain free rolling blinds as per the color make approved by the Architect or Authority including screwing, fixing and complete works.

Wallpaper: Supply and installation of wallpaper as per the design approved by the Architect or site Authority including one coat of oil priming, designing, edge cutting, cleaning and complete works. The quoted rates should include for stain free, wastages, material and labor with necessary tools for fixing, scaffoldings and complete work.

3D Wall Paneling: Supply, fabrication, and installation of 3D decorative wall panelling of approved design, texture, and finish — complete in all respects, including surface preparation, fixing frame (if required), adhesive, joint finishing, and painting/polishing — as directed by the Architect / Engineer in charge.

Fluted Panel: Supply and installation of imported PVC fluted panels as per the design approved by the Architect or Authority including necessary aluminium supports from the wall backing or studding with screws, frameworks, wastages and complete works.

Laminated wall panel: Marine plywood 12mm thick marine plywood board: Providing and fixing marine plywood 710 Grade IS 710: 2010 marked, of approved make to existing aluminium framework, backing or studding with screws etc. complete as per architectural drawings and as directed by Engineering in-charge. Plywood Board/HDHMR Board/laminate Make: (Century/Action Tesa/Merino/Greenlam or Equivalent make as approved by engineer in-charge/employer)

Brass Strips: supply and installation of T type gold finish beading 25mm thick 6 m deep including edge cutting pasting and complete works.

Recessed Down Light: Supply and installation of concealed type architectural 18 watts 4000k natural white tone COB lighting make of FULUX/Futura/Philips with minimum 2 years service/replacable warranty and complete works.