TENDER FOR ITEM RATE CONTRACT FOR MISC E/M ITEMS FOR VARIOUS INSTALLATIONS UNDER AGE WATER SUPPLY AT GE (U) E/M MEERUT CANTT

Amount

M&L for surface excavation n exc (not exceeding) 30cm deep and averaging 15cm deep and getting out clearly away all grass vegetation, saplings, shurbs, brushwwod, undergrowth, roots, and trees not exceeding 30 cm girth (measured one meter above ground level) and removing rubbish up to a distance 50meters outside the periphery of the area under clearance except in the case of surface dressing which includes for all the foregoing except clearing away of trees complete all as specified and directed by Engr-in-charge.

M& L for the pruning and branch cutting of trees not higher than 10m in height on either side located 2m away from approch path of pump houses of 100m length complete all as specified and directed by Engr-in-charge

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of pipe and cables etc. but not exceeding 10 sqm on plan including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in soft/loose soil complete all as specified.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer n.exc. 250 mm in any type of soil after the pipe laid & tested complete all as specified and directed.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L Hardcore broken stone of gauge exc 63mm but n exc 100mm , deposited, spread and levelled in layers n exc. 15 cm thicke, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L Cement concrete type B-2 1:2:4 (40mm graded aggregate) complete all specified and directed.

S & F sluice valve PN-1.6 with stainless steel spindle conforming to IS-14846-2000 doubles flange and including new flanged rubber joints complete including necessary nuts bolts with washer and rubber gasket of 100 mm dia bore complete all as specified

S & F sluice valve PN-1.6 with stainless steel spindle conforming to IS-14846-2000 doubles flange and including new flanged rubber joints complete including necessary nuts bolts with washer and rubber gasket of 80 mm dia borecomplete all as specified

M&L for construction of Brick masonry valve pit of 1000mmx1000mmx1000mm internal size consisting of Mild steel frame and cover complete complete all as specified and shown in drawing No. CEBZ drg No. TD/EM/12

Disconnecting and taking up old existing GI pipe and connection of any description / grade of size 100mm dia and in any position of trenches / under floors/ on walls etc including connected fitting/ accessories and fixtures such as bend, Union, elbow socket etc.

Disconnecting and taking up old existing GI pipe and connection of any description / grade of size 80mm dia and in any position of trenches / under floors/ on walls etc including connected fitting/ accessories and fixtures such as bend, Union, elbow socket etc.

Laying only GI tubing of size 80mm , any grade in treches complete all as specified and directed.

Laying only GI tubing of size 100mm , any grade in treches complete all as specified and directed.

Taking down/Dismantling and opening carefully old non functional Non return valve of 80mm bore dia and Cleaning servicing, over-hauling and greasing reassembling and fixing in position of old non functional Non return valve , complete all as specified for increasing the life and serviceability of the same all as specified and directed by Engr-in-charge.

Taking down/Dismantling and opening carefully old non functional Non return valve of 100 mm bore dia and Cleaning servicing, over-hauling and greasing reassembling and fixing in position of old non functional Non return valve , complete all as specified for increasing the life and serviceability of the same all as specified and directed by Engr-in-charge.

Taking down/Dismantling and opening carefully old non functional Non return valve of 150 mm bore dia and Cleaning servicing, over-hauling and greasing reassembling and fixing in position of old non functional Non return valve , complete all as specified for increasing the life and serviceability of the same all as specified and directed by Engr-in-charge.

Taking down/Dismantling and opening carefully old non functional Non return valve of 200mm bore dia and Cleaning servicing, over-hauling and greasing reassembling and fixing in position of old non functional Non return valve , complete all as specified for increasing the life and serviceability of the same all as specified and directed by Engr-in-charge.

Taking down/Dismantling and opening carefully old non functional Non return valve of 250 mm bore dia and Cleaning servicing, over-hauling and greasing reassembling and fixing in position of old non functional Non return valve , complete all as specified for increasing the life and serviceability of the same all as specified and directed by Engr-in-charge.

Cleaning of Valve pit chamber of size 1m x 1m x 1m at various location of Water supply area including removal of stored water, silt, sand and debris complete all as specified and direccted by Engr-in-charge.

Taking down old unsv parts of Air compressor like cylinder head , suction/delivery valve, crank case, casing etc and repair/maintenance the same after servicing complete all as specified and directed by Engr-in-Charge. Note: parts should measured and paid separately

Supply only suction and delivery valve

Supply only moisture separator

Supply only presure relief valve

Taking down/Dismantling and opening carefully old non functional Sluice valve of size 80mm dia and Cleaning servicing, over-hauling and greasing reassembling and fixing in position of old non functional Sluice valve , complete all as specified for increasing the life and serviceability of the same all as specified and directed by Engr-in-charge.

Taking down/Dismantling and opening carefully old non functional Sluice valve of size 100 mm dia and Cleaning servicing, over-hauling and greasing reassembling and fixing in position of old non functional Sluice valve , complete all as specified for increasing the life and serviceability of the same all as specified and directed by Engr-in-charge.

Taking down/Dismantling and opening carefully old non functional Sluice valve of size 150 mm dia and Cleaning servicing, over-hauling and greasing reassembling and fixing in position of old non functional Sluice valve , complete all as specified for increasing the life and serviceability of the same all as specified and directed by Engr-in-charge.

Taking down/Dismantling and opening carefully old non functional Sluice valve of size 200 mm dia and Cleaning servicing, over-hauling and greasing reassembling and fixing in position of old non functional Sluice valve , complete all as specified for increasing the life and serviceability of the same all as specified and directed by Engr-in-charge.

Taking down/Dismantling and opening carefully old non functional Sluice valve of size 250 mm dia and Cleaning servicing, over-hauling and greasing reassembling and fixing in position of old non functional Sluice valve , complete all as specified for increasing the life and serviceability of the same all as specified and directed by Engr-in-charge.

Taking down/Dismantling and opening carefully existing false ceiling for cleaning of air duct and reassemble the false ceiling after completion of cleaning of duct and making good the surface of false ceiling complete allas specified and directed. (False celing area not exceeding 16 Sqm)

M&L for Taking down/Dismantling and opening carefully ceiling mounted AHU of size 3m X 3m and clean filter element,servicing the blower motor and fan, refix the same in existing position after completion of servicing, complete all as specified.

M&L for cleaning of any type of air duct of any make complete inner surface with nylone brush and removing of foreign material from inside the air duct including replacement of packing and insulation material, clamp etc complete all as directed.

Servicing and recharging of fire extinguisser of various capacity include taking of safety pin,handle and checking of pressure guage including cleaning greasing etc complete all as specified and directed.(The minor item to be replaced under repair as under)

Supply only discharge valve assembly

Supplyonly gas cartridge

Supply only syphon tube assembly

Suply & laying (in replacement)) of damaged and worn out insulating rubber mat conforming IS 15652:2006 with new of dimenssions 200cmx 60 cm all as specified and directed

M&L for replacement of old restricted entry board of size 300x100 mm with new restricted entry board of size 300mmX 100mm complete all as directed by Engr-in-Carge

M&L for cleaning of under ground sump of 20000 Gallon capacity, cleaning of inner surface and bottom with iron brush and removing of foreign material from inside wall of the sump including minor plastering work complete all as specified and directed.

Supply and replacement of old unsv swimming pool test kits including chlorine and pH tests for all as specified and directed by Engr-in-charge.

Supply and replacement of old unsv test kits along with test tube and testing reagent for testing PPM concentration of residual chlorine in water complete all as specified and directed

M&L GI fittings for spigot socketed pipes upto 100mm nominal bore such as Bends ( any type, radius and angle) Tapers any type, ( straight , bend, increasing, decreasing or double socket etc.) Tee pieces single branch , 'Y' junction, double branch , cross complete all as specified and directed.

Jain Traders

Shikha Enterprises