Loading
Loading…
Loading…
Tender Value
₹1.6 L
EMD Value
₹1,600
Closing Date
10 Sept 2026, 11:00 am
Executive Engineer
PWD Buildings C and M Division SIvagangai
Providing E Seva Kendra Arrangements in Additional Combined Court Building Campus at Sivagangai in Sivagangai District
2026_PWD_697867_1
1 2026 2027 EE B C M D SVG Dated 25.08.2026
Open Tender
Civil Works - Buildings
Lump-sum
30 days
Sivagangai
Please refer the Tender Documents
7 documents required · 7 mandatory
₹0
₹1,600
Yes
25 Aug 2026
25 Aug 2026
10 Sept 2026
26 Aug 2026
10 Sept 2026
26 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: [email protected] kg/m and Bottom rail: 100x44.45x2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,Alu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Eachs., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bushincluding cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers.. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. | 1 | M2 | - | - |
| 2Fabricating Supplying and fixing in position of Aluminium anodised Powder coated matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. | |||||
| 3Supplying and fixing of Table arrangements for computer of size 5.00x0.60x0.75m using 18mm thick prelaminated particle board for section finishing edges with tape the rate also including sliding board of 75cm length and 35cm width to accommodate key board.the cost also includes cost of labour charges,transportation erection and all other incidental charges,etc.., | |||||
| 4Supply and delivery of moulded plastic chair with armest, made of single -piece virgin polyproylene/HDPE frame, overall size approx.600 mm seat width, 600 mm seat height, smooth finish, sturdy and stable to with stand 100kg laod, completed as directed by the Engineer in charge | |||||
| 5Supplying & fixing 12mm thick water proof plywood with aluminium section of size 50x44.45x2.50mm weighing 1.292kg/m, 2nos., including cutting, drilling, fixing with necessary screws, fasteners and all labour, complete as directed by the engineer in charge etc., complete. | |||||
| 6Labour for fitting Water proof plywood etc., complete | |||||
| 6.01 | Carpender I Class | - | No | - | - |
| 6.02 | Mazdoor category-II | - | No | - | - |
| 7Painting Old Plastered Wall Surface with Two finishing coats of ready mixed Interior Emulsion of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) | |||||
| 8Gst @18% | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.28 MB
TenderDocumentsESevaiCourt.pdf
Tender Documents • 1.16 MB
BOQ_838946.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].