CLEANING AND REPLACEMENT OF SEWAGE LINE, DRAIN INCLUDING MANHOLES, SEPTIC TANK, SOAKAGE WELL AND MANHOLE COVERS, DAY TO DAY COMPLAIN AND CERTAIN MISC REPAIR WORK IN THE AOR OF AGE B/R-III UNDER GE (W) JABALPUR

Amount

Excavating in trenches not exc 1.5 m wide and not exc 1.5m in depth for drains in soft/loose soils complete all as specified and as directed .

Excavation in trenches n exc 1.5m wide exc 1.5m but n exc 3.0m in depth ;for foundation etc.or for shafts well cesspit,maholes, pier holes etc.n exc 10 Sqm on plan area complete all as specified and as directed

Excavatoin over areas n exc 1.5m deep and getting out in any type of soil complete all as specified and as directed

Excavation over areas depth exc 1.5m but not exc 3m and getting out in any type of soil complete all as specified and as directed

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in foundations, filling and mass concrete complete all as specified and as directed

M&L for broken bricks or brick bat loose filligs with aggregate of gauge 80 to 150mm in soakage pits, soakage well complete all as specified and as directed.

Removing excavated material (Soils) not exc 50 m & depositing where directed at level not exc. 1.5 M above the starting point complete all as specified and as directed.

Returning filling in including, spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soils complete all as specified and as directed.

Demolition and breaking up drain pipes of 150mm internal dia SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified and as directed

Demolition and breaking up drain pipes of 200mm internal dia SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified and as directed

Demolition and breaking up drain pipes of 300mm internal dia SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified and as directed

M & L Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in Cement Concrete 1:3:6 type C2 for bore of pipes 150mm dia complete all as specified and as directed.

M & L Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in Cement Concrete 1:3:6 type C2 for bore of pipes 200mm dia complete all as specified and as directed.

M & L Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in Cement Concrete 1:3:6 type C2 for bore of pipes 300mm dia complete all as specified and as directed.

M&L for SGSW drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed as specified complete all as specified and as directed.

Supply ,laying and jointing 150mm nominal bore dia double wall corrugated (DWC) pipes class SN4 confirming to IS-16098:2013 (Part-2) l,stiffness with and including necessary jointing materials complete all as specified and as directed

Supply ,laying and jointing 200mm nominal bore dia double wall corrugated (DWC) pipes class SN4 confirming to IS-16098:2013 (Part-2) l,stiffness with and including necessary jointing materials complete all as specified and as directed

Supply ,laying and jointing 300mm nominal bore dia double wall corrugated (DWC) pipes class SN4 confirming to IS-16098:2013 (Part-2) l,stiffness with and including necessary jointing materials complete all as specified and as directed

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) complete all as specified and as directed

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cills, PCC blocks, coping, bed plates, seismic and other similar bands, plinth bends, etc including weathering slightly rounded or chamfered angles and throating, including necessary form work etc complete all as specified and as directed

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings complete all as specified and as directed..

M&L for brick work with sub-class 'B' bricks,old size straight or curved on plan exceeding 6 M mean radius built in CM 1:6 complete all as specified and as directed.

Description all as per above Srl item No 22 but except bricks.

Brick work with sub class 'B' bricks, old size in one brick thick honey comb walling ,built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster of any description including racking out joints for key scrubing with water etc complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick wall or concrete surface in CM 1:4 with water proofing compound and to be finished even and smooth with out using extra cement complete all as specified and directed. (Note:WPC shall be measured and paid separetely).

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Precast cement concrete M 20 nominal mix (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M & L for RCC (1:2:4) Type B1 (Nominal Mix) using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs , landings, balconies, canopies, deck slab and in shelves and the like complete all as specified and as directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and as directed.

M&L for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for Mild steel TMT bars 5 mm and over upto and including 10 mm dia in stirrups,spaces and binders cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and as directed.

Use & waste for form work to soffits of suspended slab such as roof slab, floor slab , landing and similar work; not exc 200 mm thick horizontal or sloping, finished fair and even complete all as specified and as directed.

Use and waste for form work to faces of walls, retaining walls, abutments, parapets and staircases, railing and similar work including attached pillasters, buttresses etc vertical or to batter fair finished surface of concrete complete all as specified and as directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 200 mm internal dia of pipe complete all as specified and as directed.

Supply only Water proofing compound complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches complete all as specified and as directed.

S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches complete all as specified and as directed.

S&F for 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F for 75mm bore PVC (SWR) bends any radius complete all as specified.

S&F 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and as directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed.

S&F 110mm bore PVC (SWR) branch piece, single(Single Y) equal or unequal with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Dismantling of cast iron drain pipe jointed with cement mortar/lead joint and taking out from wall/floor if reqd /75/100mm complete all as specified and as directed.

M&L for 100 mm bore Cast iron Sand cast pipes, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed .

M&L 75 mm bore Cast iron Sand cast pipes, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed .

S&F for 100mm bore cast iron Bends (any radius),diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and as directed.

S&F for 75 mm bore cast iron Bends (any radius),diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and as directed.

S&F for 100mm bore cast iron Bends (any radius),diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and as directed.

S&F for 75mm bore cast iron Bends (any radius),diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and as directed.

S&F for 100mm bore cast iron Bends (any radius),with duck's foot or heel rest ( with oval access door complete all as specified and as directed.

S&F for 75mm bore cast iron Bends (any radius),with duck's foot or heel rest ( with oval access door complete all as specified and as directed.

S&F for 100mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed.

S&F for 75mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed.

S&F for 100mm CI Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed.

S&F for 75mm CI Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and as directed.

S&F for PVC (SWR) gully trap of size 125 x 110 mm setting and jointing with solvent cement complete all as specified and as directed.

Removal of sludge from septic tanks / manholes of any size and depth and burying the sludge in pits with suitable depth & filled by earth out side the building perimeter including earth work and removal of surplus soil including dewatering of water complete all as specified and as directed. Note - Dewatering of water or mud will not be paid only sludge to be paid

Clearing & removal of blockage, of any type in WC, bathroom, kitchen including floor/nahani traps, soil waste/vent pipes gully trap upto 1st manhole, in any situation by way of cleaning / desludging and removing foreign materials to a distance up to 50 metres to the entire satisfaction of engineer-in-charge. Note:- (a) Contractor shall detail his supervisor to office of AGE B/R III daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area divided in two parts i.e. Md accn & OTM accn under this contract. (b) Contractor shall provide service providers (sweepers) separately for both the areas as per the complaints list given alongwith all requisite tools, equipments, including safely measures for attending complaint and ensure completion report by 5.00 PM same day. (c) Complaint/blockage cleared in one building in a day may be for WC, bath, kitchen, floor/nahani traps etc shall be treated as one complaint. (d) Please note that all the complaints relating to internal sewage (WC/bath/kitchen etc) shall be attended within same day (within 12 hour). (e) In case any complaint pertaining to inside the building (WC/bath/kitchen) is not attended by 12.00 hours. A penalty @ Rs. 100% complaint shall affected from contractor payments.

Clearing & removal of all blockage in sewage line of any dia of sewer lines, manholes of any section and any depth, in any situation by way of cleaning / desludging foreign materials as well as blockage of sewage line in between successive manholes by mechanically including desludging of manhole /sewage line where required and odered by Engineer-in-charge and keeping sewer line functional, upto final drop/outlet into septic tank /central sewage system terminating in other joining zone/ area or into sewage wells complete all as specified and as directed. Note:- (a) Contractor shall detail his supervisor to office of AGE B/R III daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area under this contract. (b) Contractor shall provide service providers (sweepers) as per the complaints list given alongwith all requisite tools, equipments, including safely measures for attending complaint and ensure completion report by 5.00 PM same day. (c) Please note that all the complaints relating to sewage line shall be attended within same day (within 12 hour). In case of blockage in sewage line could not be detacted/completed same day and concerned JE / Engineer-in-Charge is satisfied to the efforts applied but the same shall be attended and all blockage must be cleared by 24 hours (next day by 5.00 PM) without fails. (d) In case any complaint pertaining to clearing of blockage in sewage line is not removed /cleared within 24 hours (next day 5.00 PM). A penalty @ Rs. 200/- per complaint shall affected from contractor payments. (e) Blockage cleared between two man holes irrespective of length in between shall be treated as one complaint.

Cleaning of septic tank by removing septic tank cover , pumping out fluid, removing, sludge/sediments by mechanical means, transporting the fluid/sludge etc in covered containers by manually or mechanically and burying the same in pits where directed including necessary excavation refill and disposal of surplus soil etc complete, cleaning of septic tank with water placing the covers intact, removing bush/ vegetation near by septic tank to an extent of 3 mtrs around all as directed by engr-in-charge.

(a) Up to 50 User Septic tank Capacity

(b) More than 50 user and up to 100 User septic Tank Capacity

(c) More than 100 user and up to 250 User septic Tank Capacity

(d) More than 250 user and up to 400 User septic Tank Capacity

Cutting of grass, growth/ vegetations, bushes or like and similar work and making the workable space for carrying out cleaning of sewage line/ manholes in any location or condition all as specified and as directed.

Demolition of precast concrete articles, built in cement mortar including all quoins, arches, pillars,etc,including ashlar facings dressed stone work complete all as specified and as directed.

M&L for providing 35mm thick precast cement concrete louvres and jallies, type B0 1:2:4 (using 12.5mm graded aggregate) measured solid,including all mouldings but excluding frame and set in cm 1:4 complete all as specified and as directed.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer on newly plastered wall surfaces including preparation complete all as specified and as directed.

Dismantling post or struts (wood,steel or RCC ) any section ,including taking out embeded portion in concrete or masonry and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh,any type complete all as specified and as directed.

Excavation in post holes n.exc 0.5 Cum getting out, retrurning, filling in and ramming earth and removing surplus soil to a distance n.exc 50m as in soft/loose soil and making good surface complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 ( using 40 mm graded coarse aggregate). as in foundation filling and mass concrete complete all as specified and as directed.

S&F hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply only mild steel Galvanised wire Chain link fencing square mesh of any size complete all as specified and as directed.

Fixing only chain link fencing in-cluding line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other ends with washers 12mm dia and , n exc 5cm long ) complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red-oxide zinc chrome primer on new steel surfacces of any description not otherwise desribed, over 10cm width or girth including preparation complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red-oxide zinc chrome primer on new steel surfacces of any description not otherwise desribed, n exc 10cm width or girth including preparation complete all as specified and as directed.

S&F for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (Each line wire to be measured) complete all as specified and as directed.

M&L for broken glass coping on top of walls set in CM 1:3 including taking off and removing rubbish complete all as specified and as directed.

M&L for removing of RCC cover to cleaning and de-silting of existing storm water drain and making functional complete all as specified and as directed.

HAFEEZ CONSTRUCTION (BID ID -3111618)

Chetna Enterprises (BID ID -3111351)

SHRI KRISHNA CONSTRUCTIONS (BID ID -3103664)