DAY TO DAY B/R MAINTENANCE SERVICES, INTERNAL WATER SUPPLY AND REPAIR TO STRUCTURAL MEMBERS, RCC WORKS, INTERNAL/EXTERNAL PLASTERING, PERIODICAL SERVICES TO CERTAIN MD AND OTM ACCN IN AREA-IV UNDER AGE B/R WEST COLABA, MUMBAI

Amount

M&L for attending complaints for plumbing and sanitary works on all working day from 0900 hrs to 1730 hours in area V and IV of AGE B/R West with all plumbing tools required at site (including ladder/scaffolding if required), complete all as specified and directed.

M&L for attending complaints for joinery and carpentry works on all working day from 0900 hrs to 1730 hours in area V and IV of AGE B/R West with all necessary tools required at site (including ladder/scaffolding if required), complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises, complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Coloured glazed digital ceramic wall tiles 300x450x7mm / 300mm x 600mm x 7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in white cement mixed with pigment to match the shade of tiles, complete all as specified and directed.

M&L Coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L Coloured double charged vitrified tiles 10 mm thick (Square / Rectangular) polished area of each tile not exceeding 0.36 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles, complete all as specified and directed.

M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes like tiles etc, complete all as specified and directed.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc, complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius and built in CM (1:6), complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L Rendering 10 mm thick in CM (1:4) on fair faces of brick work, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, as in foundation of poles, filling or mass concrete, complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B-1 using 12.50 mm graded stone aggregates as in floor finished cement concrete surfaces even and smooth using extra cement, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site, complete all as specified and directed.

M&L for Granite (of any colour) 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, counter for wash basin, flooring and all other similar works, complete all as specified and directed.

M&L for Granite (of any colour) 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in skirting, steps risers, wall dado and similar works and all other similar works, complete all as specified and directed.

S & F in repair for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:6, complete all as specified and directed.

All as per item No. 18 above but as in skirting/ riser/ dado etc with and including 10 mm thick backing coat in CM 1:4, complete all as specified and directed.

M & L Parking tiles any shape and size and color in floors etc. with and including 20mm thk CM ( 1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles, complete all as specified and directed by Engineer in Charge.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15mm dia bore, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20mm dia bore, complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings as IS 1239 (PART 1) : 2004 and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings as IS 1239 (PART 1) : 2004 and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good ,cutting n, exc. 10cm girth, complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white,including trap and connection to drain and flushing pipe (excluding flushing cistern) including seat cover with flat bottom and mild steel chromium plated or aluminium hinging devices for pedstal pan, complete all as specified and directed.

S&F in repair vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets, complete all as specified and directed.

S & F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size, complete all as specified and directed.

S & F in repair Wall mounted water closet 520 x 360 x 410 mm accessories complete fixed with waste coupling and waste pipe of size, complete all as specified and directed.

S & F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F as in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F PVC connection 15mm size PTMT nuts of length 450 mm, complete all as specified and directed.

S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy chromium plated, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repair for 15 mm bore, fancy type, wall mixer, brass chromium plated with 115 mm long bend pipe for connection to overhead shower(with bush and piston Divertor fittings) with aerator, complete all as specified and directed.

S & F in repair brass chromium plated, fancy type, 15 mm bore central hole basin mixture with 'U' shaped round casted spout with 3" long pipe connection with aerator, complete all as specified and directed.

S & F in repair 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1 mtr long, complete all as specified and directed.

S & F in repair fancy type CP Towel Rail 61 cm long, complete all as specified and directed. Make : ESS ESS CROMA Cat Part No C 412 or equivalent of Jaquar/ Hindware/Cera/Parryware / Prayag.

S & F in repair CP Towel Ring, complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 502 or Equivalent of Jaquar/ Hindware/Cera/Parryware / Prayag

S & F in repair CP soap dish, complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 414 or Equivalent of Jaquar/ Hindware/Cera/Parryware / Prayag

S & F in repair CP toilet paper holder, complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 206 or Equivalent of Jaquar/ Hindware/Cera/Parryware / Prayag

S & F in repairs CP Towel Bracket (61cm) long, complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 423 or Equivalent of Jaquar/ Hindware/Cera/Parryware / Prayag.

S&F in repairs 8 mm glass shelf having size of 56 cms x 13 cms with chromium plated L- bracket below WHB mirror, complete all as specified and directed. Make : ESS ESS Croma or equivalent of make Jaquar/ Parko / Prayag.

S&F in repair sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long Make:- Jaquar/ Hindware/Cera/Parryware, sample as approved by GE.

S&F in repairs 15 mm bore overhead shower single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long (light weight) round shape with wall flange, complete all as specified and directed. Make:- ESS ESS CROMA Cat Part Not T 134 or Equivalent of Jaquar/ Hindware/Cera/Parryware / Prayag

S & F as in repair SS grating round 125mm size of anti- cockroach, anti-clog,anti faul etc, complete all as specified and directed.

S&F in repair 15 mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type, high pressure, swan neck with or without lettred 'HOT or COLD' with long screwed sunk and fly nut, complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 201 or Equivalent of Jaquar/ Hindware/Cera/Parryware / Prayag

S& F in repair water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices, complete all as specified and directed.

S&F in repair Kitchen sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm (or nearest size as per Cat Part specified), complete all as specified and directed.

S&F in repair Kitchen sink without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (or nearest size as per Cat Part specified), complete all as specified and directed.

M&L in repair 75mm dia PVC(SWR) floor trap with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repairs of vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including taking down of existing squatting pan, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc incl raking out joints hacking for key scrubbing down with water and removing debris outside MD land upto 04 storeys buildings, complete all as specified and directed.

Material and labour for 15-20 mm average thick Ready Mix Plaster in multy layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, including use of scaffolding, complete all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only. Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/ M/s Ultratech Cement Ltd.

M & L for 10-12 mm Thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces(internal surface) and finished even & smooth witjhout using extra cement, complete all as specified and as directed. Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/ M/s Ultratech Cement Ltd.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3mm thick (average) wall putty, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint (on new/old surface) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.

Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3mm thick (average) wall putty, complete all as specified and directed.

M & L for 5 mm thick plaster in CM (1:3) on ceiling surfaces and finish the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for Preparation of newly plastered ceiling surfaces and applied two coats of white wash, complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots, filling nail holes and apply one coat distemper oil emulsion on walls complete by an authorised applicator, complete all as specified and directed.

M&L for Preparation of old decorated surfaces of ceilings by washing, rubbing down and stopping and applying one coat of oil bound distemper (oil emulsion) on ceilings, complete all as specified and directed.

M&L for complete removal of old decorated steel surfaces of any description over 10 cm width or girth, applying one coats of synthetic enamel over a coat of red oxide, complete all as specified and directed.

Taking down chowkats or frame with shutter ( without taking off shutter from frame), exc 1.5 sqm but n exc 4 Sqm each, complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutter from frame), n exc 1.5 sqm each, complete all as specified and directed.

S&F Powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket,glazing, screws, handles, hinges, tower bolts etc, complete all as specified and directed. Note :- (i) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

S&F Factory made 35 mm thick 2nd hard wood plain framed panelled shutters(any panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003(Part-I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats, complete all as specified and directed.

S&F 2nd Class hard wood Glazed and skelton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows ventilator stilles and rails provided as per SSR part -I Sector 8 clause 8.24 (b), complete all as specified and directed.

S&F 2nd class hard wood plain,solid, straight chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint, complete all as specified and directed.

M&L for 5.50 mm thick sheet glass, ordinary quality and glazing oil putty or with wooden beading in squares n exc 0.50 sqm in each pane, complete all as specified and directed.

M&L for 5.50 mm thick figured glass,pin head type and glazing oil putty or with wooden beading in squares n exc 0.50 sqm in each pane, complete all as specified and directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, decorative type on both side, complete all as specified and directed.

M&L in repair for 18 mm thick pre-laminated Plywood , interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber work as in kitchen cup board shutters and all other similar works including 1st class teak wood lipping over cut surfaces, complete all as specified and directed.

M&L in repair for 150 mm long aluminum, anodised, barrel tower bolt of extruded section, complete all as specified and directed.

M&L in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S&F in repair 100 mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair 75 mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair mild steel 300 mm, ordinary rat tail rod pattern springs,including roller and roller plate, complete all as specified and directed.

S&F in repair 150 mm size extruded aluminium alloy handles, fabricated type anodised pattern/ design as approved, complete all as specified and directed.

S&F in repair 75 mm size extruded aluminium alloy handles, fabricated type anodised of pattern/design as approved, complete all as specified and directed.

S&F in repair brass 7 levers mortice night latch, size 100 mm including safety chain, complete all as specified and directed.

S&F in repair brass hat and coat hooks, solid body, 175 mm to 250mm, complete all as specified and directed.

S&F in repair aluminium plate type II gate and shutter, hooks and eyes 200 mm size, complete all as specified and directed.

S&F in repair 40 mm dia, mild steel cupboard knobs fixed with nut, screws and washer of brass, polished, complete all as specified and directed.

S&F in repair 40 mm dia, brass cupboard knobs fixed with nut, screws and washer of brass, polished, complete all as specified and directed.

S&F in repair 150 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

S&F in repair 150 mm size floor door stopper of brass alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

S&F in repair aluminium (extruded section body) door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including beading, complete all as specified and directed.

S & F in repairs Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including beading, complete all as specified and directed. Note :- Rate inclusive of fixing wire cloth in wooden as well as in aluminium frame.

Supply and fixing in repairs 20mm dia decorative type curtain rods chromium plated anodised aluminium, complete all as specified and directed.

Supply and fixing in repairs curtain brackets, 20mm dia, decorative/ fancy type, made of brass, complete all as specified and directed.

Supply only Water proofing chemical Pidiproof LW+ of Dr. Fixit or Equvalent, complete all as specified and directed.

M & L for Plastering 20-25mm thick (Avg) epoxy based ready mix Polymer modified cement mortar in two coats, 15mm base coat and subsequent finishing coat with and including curing as per manufacturer's instruction, complete all as specified and as directed by Engr-in-Charge. Make- Dr Fixit Repair Pro Polymer Mortar, FOSROC-RENDOROC S2-structural grade Polymer Mortar, Shalifix FRM Polymer Modified Fibre Reinforced Mortar of STP or equivalent as approved by the Engineer-in-Charge.

Supply and fix in repair 40/50 mm gun metal gate valve, with iron wheel head, screwed both ends for GI pipe of following sizes, with union, (ISI Marked) fixed in existing line and in position, complete all as specified and directed.

Supply and fix in repair 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Supply and fix in repair 25mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Supply and fix in repair 15 mm gun metal gate valve, with iron wheel head, screwed both ends for GI pipe of following sizes, with union, (ISI Marked) fixed in existing line and in position, complete all as specified and directed.

Cleaning of RCC water tanks of 5000 to 10000 litres of various capacity in existing position by mechanised pressure cleaned by Mechanical high pressure spray and steel wire brush to remove algae/dirt/foregin completely and soaking out water/dirt with a high pressure wet vaccume pump and removing spoils outside of MD land and providing sticker showing the date of cleaning, complete all as specified and directed.

Cleaning of PVC water tanks of capacity exceeding 250 litres but not exceeding 500 litres including chemical treatment with Anti-bacterial agent consisting of following process: - Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 Kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge. Note : Date of cleaning will be imposed on water tank.

All as per item 101 above but tank capacity from 501-1001 litres all as specified and directed.

All as per item 101 above but tank capacity from 1001-3000 litres all as specified and directed.

All as per item 101 above but tank capacity from 3001-5000 litres all as specified and directed.

Supply and fixing in repairs rotational moulded polyethylene water storage tanks of capacity 250 liters (cylindrical vertical with closed top three layered) hoisted and fixed in position, complete all as specified and directed.

All as item No. 105 above but of 500 litre capacity.

All as item No. 105 above but of 1000 litre capacity.

All as item No. 105 above but of 2000 litre capacity.

All as item No. 105 above but of 5000 litre capacity.

S&F in repairs CI colour black round shape with dia 450 mm double seal with locking arrangement for specially desgine with heavy duty for over head tank fixing in any any height, complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs heavy duty pressure release valve model W3-B 25 mm connection brass material grade SS316-0.4 mm for fixing in any any height, complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 15 mm size, minimum weight 142 grams, complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm size, minimum weight 210 grams, complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25 mm size, minimum weight 455 grams, complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 40 /50 mm size, minimum weight 690 grams, complete all as specified and directed by the Engineer-in-Charge.

Supply and fix in repair hot water extension pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position, complete all as specified and directed by the Engineer-in-Charge.

Demolition and breaking up drain pipes 75/100/110 mm dia (Salt glazed ware,AC, PVC or reinforced concrete) set in cement mortar upto any height including all scaffloding arrangments, complete all as specified and directed.

S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto any height including all scaffloding arrangments, complete all as specified and directed.

S&F for 110 mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stay to wall or roof, complete all as specified and directed.

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips, complete all as specified and directed.

S&F PVC(SWR) bends suitable for 110 mm external dia, complete all as specified and directed.

S&F PVC(SWR) bends suitable for 75 mm external dia, complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia, complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 75mm dia, complete all as specified and directed.

PVC (SWR) branch piece, single (single Y) equal or unequal of 110 mm dia, complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110mm bore, complete all as specified and directed.

Supplied and fixed 110 mm bore bends (any radius), diminshing pieces or tapers (larger bore measured, complete all as specified and directed.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced, complete all as specified and directed.

Material and labour for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatments, complete all as specified and directed.

M&L for repairs to sunken portion of slab.Treatment of sunken floor slab compraises of the following specifications and all as specified :- (i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out. (WPC shall be measured & paid separately) (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty . (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.

(v) M&L for applying two coats of polymer modified cementious water proof coating with DR. FixiT Pidicrete URP with cement Ratio 1:1.5 as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) Plaster the bottom and sides up to full height of sunken with minimum 20mm thick CM 1:4 mixed with integral water proofing compound ( DR.Fixit LW+) 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. ( WPC shall be measured & paid separately) (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint Note 1 :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test shall be done in presence of reps of MES and record for each sunken slab shall be maintained. Cost of testing is inclued in the rates quoted above. For the purpose of payment area of bottom and sides of sunken shall be measured in sqm.

M&L for Providing factory made any colour 3- TRACK UPVC SLIDING WINDOW are made of UPVC extruded profiles with wall thickness of 2.3 mm (+ 0.2 mm), Window profile with hollow section with multi chamber, Frame (122 mm x 54 mm), sliding Glazed sash (47 mm x 80 mm), Sliding mesh sash (47 mm x 64 mm), Sliding Interlock (One vertical length in each shutters) (50 mm x 36.7 mm) for Mesh shutter & (50.5 mm x 43.5 mm) for Glazed shutter, Glazing bead (25 mm x 16 mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket, 1.5 mm (+ 0.2 mm) thick, galvanized steel Frame (13.5 mm x 34mm x 14.7 mm) 2 nos, Sliding sash (20 mm x 33mm x 20 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, complete as per manufacture's specification and direction of Engineer-in-charge.

S&F in repair 15 micron coloured aluminium anodised grill design No. DG-117, 10 mm thick including F section, complete all as specified and directed.

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 40 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and as directed.. (All loose unsound and cracked concrete shall be removed out side MD land) (Note: thickness shall be measured excluding plaster)

Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slab/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge exc 40 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and as directed. (All loose unsound and cracked concrete shall be removed out side MD land) (Note: thickness shall be measured excluding plaster)

Cleaning loose concrete if any all around reinforcement including from behind the reinforcing bars to give an average 10 mm thick (but not less than 10 mm clear air gap) and cleaning reinforcement of total rust using alkaline rust remover with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washed with water and allowing it to dry and Applying two coats of epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ Krishna Conchem) as approved by the Engineer-in-Charge for old and new reinforcement any dia, complete all as specified and as directed. (Note: - Length of reinforcement bars cleaned of rust all around shall be measured for payment.)

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height, complete all as specified and as directed.

M&L for mild steel TMT bars any dia in stirrups, spaces and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and as directed.

Providing and placing in position micro-concrete, grade M40, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 75 mm complete all as specified and as directed by the Engineer in charge (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument and including necessary form work), complete all as specified and as directed.

M & L for removing plants including roots by dismantling of brickwork/PCC including necessary scaffolding of any type and in any position or location i.e roof, parapet walls near pipes etc and applying acid after removing roots for preventing the re-growth & making good of disturbed portion using PCC 1:2:4 type B-0 & 10mm thick cement plaster in CM (1:3), size of disturbed portion not execeeding 150mm X150mm X 200mm, complete all as specified and directed.

M & L for filling cracks by cutting 'V' groove cracks of internal or external plaster of walls, ceilings/Chajjas all along the crack upto 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any hieght, complete all as specifed and direcetd. Make:- Use of Dr Fixit Crack 'X' shrinkfree paste compound/ Smartcare Texture Crack Filler / Build Core Compound / Fosroc Compound, as approved by GE.

M&L for cleaning all loose laitance on the wall and concrete substrate and applying one coat of epoxy bonding agent of SBR latex on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height, complete all as specifed and direcetd. Make: Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd or Nerolac perma SBR latex

S & F Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied not exceeding 4kg per sqm. and fixed in reinforcement or by anchroring on wall screw min 8 -10 cm in depth drilled and grout into the required wall and concrete structure, complete all as specifed and direcetd.

M & L for Ready mix plaster for internal / external wall rendering 15 mm thick in two coats of 10 mm base coat and 5 mm finishing coat on brick wall or concrete surfaces incl taking down off old cement plaster and cement mortar and making groove of appropriate size and finishing sand faced finished using sponge, including use of scaffolding and removing debris outside MD land, complete all as specifed and direcetd. Name of Manufacturer: M/s Ultratech Cement Ltd / M/s Accoplast / M/s CK Birla AEROCON

M & L Rendering 10mm thick on fair faces of brick work or concrete surfaces on cement mortor 1:3 for including taking down and removing debris outside MD land, complete all as specifed and direcetd.

M&L for Plastering 20 mm thick avg Polymer modified mortar (ready mix pack) in two coat 10-12 mm base coat and 5 mm finishing coat including taking down of plaster and including curing as per manufacturer's instruction, complete all as specifed and direcetd. Make : Dr. Fixit Repair Pro Polymer Mortar, Fosroc RENDEROC S2 structural grade polymer mortar, ShaliFix FRM Polymer Modified Fiber Reinforced Mortar of STP or equivalent as approved by GE

M & L for Preparing Newly plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer and use of scaffolding where required at any height of buildings for external painting, complete all as specifed and direcetd.

M&L for Preparation of newly plastered wall surfaces and applying a coat wall care putty 2mm thick avg on plastered surfaces rubbing with sand paper, preparatory to distempering and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint, complete all as specifed and direcetd.

M&L for Preparation of newly plastered celling over three coat of white wash, complete all as specifed and direcetd.

M & L for Preparing the old painted plastered surface of external walls /ceiling/ chajjas/ /roofing concrete structure or any other similar structure Exterior walls are scrubbbed and scrapped thoroughly to remove smoke soot, moulds, moss and efflorsant salts, and mildew using steel wire brush. Mild solution (like bleaching powder in water) can also be used to get rid of mildew and algae from the walls. Walls need to dry completely. High pressure water jet can also be used to wash away dirt and any old paint flakes.Cracks need to be attended on priority. Cut in along the length of the crack using a knife. Crack Filling compounds are used to fill in the cracks. Surface is then sanded using sandpaper to even out the surface, complete all as specifed and direcetd.

M & L for applying one coat of weather proof acrylic exterior paint (100% Acrylic) (up to any height bldgs) including use of scaffoldings, complete all as specifed and direcetd.

M & L for applying two coats of weather proof acrylic exterior paint (100% Acrylic) (up to any height of bldgs) including use of scaffoldings, complete all as specifed and direcetd.

M & L for Mild Steel props for scaffolding for building of any height (including high rise bldgs upto and including 14th floors) for repairs of cracks, chipping off loose plaster, preparation of external wall surface or any other similiar work for application of painting as specified and directed by Engineer-in-Charge. Note : Item will be measured and paid as per the coverage area of painting only once for a given location.

M & L for French polishing with two or more coat on new / old surfaces of any description, width or girth after cleaning and fine sanded and making free from any wax and grease, removing it completely (with Paint & Varnish Remover if required) and preparing the surface by filling of open grained with a coat of wood filler and making it smooth shining surface using alcohal based shellac finish .

M & L for Preparation of old painted wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint any height including use of scaffolding wherever required for external painting of wooden surfaces, complete all as specifed and direcetd.

M & L for Preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint at any height including use of scaffolding where required for external painting of steel surfaces, complete all as specifed and direcetd.

M & L for Preparation of old steel surfaces for cleaning and removing loosely inherent material/paint using hand tools, wire brush/ scraper (or by sand or grit blasting or wire brushes operated by pneumatic power or electricity to near white metallic surface) or using a power tool such as a grinder, and then washing it off with acetone or thinner or any other water based liquid solvent to get cleaner surface for painting, coating, and welding Prepare the surface by and then applying two coats of epoxy paint (polyurethane aluminium based) over one coat of epoxy primer (zinc phosphate based) as specified and directed by Enggr- in - Charge. Make : Asian Paints PPG or equivalent.

M&L applying old decorated surfaces provided two coats of white wash to ceiling incl preparation plastered surfaces, complete all as specifed and direcetd.

M & L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty (Birla White Wall care or equivalent) 2mm thick avg on plastered surfaces rubbing with sand paper, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer, complete all as specifed and direcetd.

Material and labour 35-40 mm thichk machine cut cudappa stone slab in horizental/vertical jams laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing & rounding to edges of slab as in window cills/jams including screed bedding 10mm thick in CM 1:6, complete all as specifed and direcetd by Engineer-in-Charge.

Machine Grinding/rubbing/polishing to Terrazzo/Kota stone tile surfaces to mirror finish, complete all as specifed and direcetd.

Frends Enterprises (BID ID -3383857)

RUPESH CONSTRUCTION CO (BID ID -3384020)

AAGAM ENTERPRISES (BID ID -3383975)

N F ENTERPRISES (BID ID -3383843)

binta construction (BID ID -3383737)

NATH CONSTRUCTION (BID ID -3380987)