Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.1 LAccepted-AOC A 46 ARYA NAGAR ALWAR RAJ 301001 | ALWAR | RAJASTHAN | 301001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹45.9 L+₹56,633.90 (1.25%)Rejected-Finance 60 MADHUVAN BANK COLONY ALWAR | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹46.8 L+₹1.5 L (3.26%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹48.9 L+₹3.6 L (7.85%)Rejected-Finance A 103 VEERA GARDEN AMBEDKAR NAGAR ALWAR 301001 RAJ | ALWAR | RAJASTHAN | 301001 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹48.9 L+₹3.6 L (7.89%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
Refer Docs
EMD Value
₹98,200
Closing Date
28 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
PROVN OF BATTERY CHARGING SHOP AND SPL REPAIR TO BLDG NO T-15 AND P-618 AT ITARANA, ALWAR
2022_MES_521154_1
8070/E8
Open Tender
Civil Works
Item Rate
180 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹98,200
Yes
20 Jun 2022
30 Apr 2022
30 May 2022
30 Apr 2022
28 May 2022
14 May 2022
30 Apr 2022 - 13 May 2022
60 days
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep in soft/loose soil complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.50m in depth for foundation etc and for manholes etc exceeding 10 Sqm on plan and not exceeding 1.5 m depth and getting out in soft/loose soil complete all as specified and directed.
Excavating over areas, not exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.
Removing excavated materials (soils) exc 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.50 km above the starting point.
Returning filling in, including spreading, levelling, watering and well rammixg in layers not exc. 25 cm in soft/loose soil complete all as specified and directed.
M&L cement concrete (1:4:8) type D-2 (using 40mm graded stone agg) as in fdn filling and mass cement concrete/sub base of floor complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6m radius, built in CM in 1:6 all as specified and directed.
Brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified and directed.
M&L formwork to sides of concrete foundations, footings, bases of columns, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter for rough finished concrete surfaces complete all as specified and directed.
M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or circular for rough finished surfaces of concrete complete all as specified and directed.
M&L form work to edges of concrete flats, treads, breaks in floor & roofs n.exc 20cm wide horizontal or sloping and similar works exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed.
M&L formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete complete all as specified and directed.
M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, etc for rough finished surfaces of concrete complete all as specified and directed.
M&L form work to soffits of slab, floor slab, landing and similar work etc n.exc 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.
M&L for RCC M-25 Design mix using 20mm graded crushed stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M-25 Design mix using 20mm graded crushed stone aggregate in Column/Pillar and similar work complete all as specified and directed.
M&L for RCC Design Mix M-25 as in chhajjas complete all as specified and directed.
M&L for RCC Design mix M-25 as in roof slabs supported on walls, beams & columns in floors etc.
M&L for reinforced cement concrete Design Mix M-25 as in roof beams, cantilevers, breassummers and lintels over 1.5m span complete all as specified and directed.
M&L broken stone hard core of gauge n.exc 63 mm, deposited spread and levelled in layer n.exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.
M&L cement concrete type C-1 (1:3:6) 75mm thick as in plinth protection surface finished even and smooth complete all as specified and directed.
M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) surface finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15 mm thick other than fair face of brick work or concrete surface in CM 1:4 finishing surface even and fair without using extra cement complete all as specified and directed.
M&L rendering 5mm thick in CM 1:3 as in ceiling/isolated vertical concrete surfaces finished surface even & smooth without using extra cement complete all as specified and directed.
S&F mild steel TMT bar 10mm dia and over, cut to length bent to shape reqd incl cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
All as per item No 25.00 above but 6 to 8mm dia.
All as per item No 25.00 above but 5 to 10mm dia as in stirrups.
M&L for preparation of newly steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide over 10 cm width or girth.
M&L for preparation of newly wooden and applying two coats of syngthetic enamel paint over a coat of pink primer over 10 cm in width or girth complete all as specified and directed.
S&F for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying three coats of white wash on walls complete all as specified and directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
M&L for padding & levelling course in 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) on roof & floor, finished even & fair all as specified and directed.
M&L for anti-termite treatment to the bottom and sides of excavation at the rate of 5 ltrs of emulsion per square metre of surface area complete all as specified and directed.
M&L for anti-termite treatment to the top surface of filled earth at the rate of 5 ltrs of emulsion per square metre of surface area complete all as specified and directed.
M&L for anti-termite treatment to the soil under plinth protection at the rate of 5 liters of emulsion per square metre of surface area complete all as specified and directed.
M&L 20mm thick cement plaster in CM 1:3 on roof slab mixed with WPC as per manufactures instructions incl finishing fair and even all as spceifed and directed.
M&L water proofing treatement to RCC roof slab/sunken including parapet comprising of following course of treatement/specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. NOTE : Bituminous primer shall be 'TANK MASTIC' manufactured by M/S STP Ltd or 'EMW FLATE' M/S Texas India Ltd (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.6 Kgs/Sqm reinforced with non woven polyester fabric weight not less than 150 gms per sqm polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flushing complete all as specified and directed.
M&L PCC 1:2:4 type B-0 12.5 mm graded stone aggregate average thickness 50mm thick laid over APP mebranes paddings in panels, the size of panels shall be 1 to 1.5m in length and width joint 10 mm wide, the space for joint shall be filled with bitumen and sand in (1:3) etc all as specified and directed.
Supply only liquid WPC complete all as specified and directed.
S&F 35mm thick 2nd class hard wood factory made plain, framed, panelled shutter with lock rail & panel of 9mm BWP commercial ply seasoned & chemically pressured treated/12mm venerred, particle board with commercial veneering on both faces. The size of rail & steel as per IC:1003 (Part I) kiln seasoned & chemically pressure treated.
S&F extruded aluminium alloy handle 150mm long fabricated type anodised complete all as specified and directed.
S&F alumnium anodised barrel tower bolt 200mm long extruded section complete all as specified and directed.
S&F 300mm long aluminuem sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple late and fixed complete all as specified and directed.
S&F mild steel work confirming to Fe-290 or E-165 in hold fasts to flat iron cut to length, bend to shape incl preparing surfaces and trated with tar and sanded with clean sharp and complete as in hold fast wind etc complete all as specified and directed.
M&L for MS framed guard bars conforming to Fe-290 or E-165 welded to steel windows/ventilations complete all as specified and directed.
M&L for rolled mild steel work angle iron (40x40x6mm) as in door frame (chowkhats) incl provn of 12mm dia deformed bar welded horizontaly to bottom of frame Fe-410 or Fe-310-0 incl preparing back of chowkhat and applying two coats after & anding newly fair surface with clean sharp sand paper complete all as specified.
S&F factory made box type steel windows with side hung shutters incl box type hinges with steel handles & steel peg stay complete with glazing bars/dove talied welded incl fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) & marking good walls & cills to match the existing complete all as specified and directed.
S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each.
S&F mild steel butt hinges medium weight cold rolled ISI marked of size 100 mm complete all as specified and directed.
M&L for acid resistant tiles 15mm thick laid on floors incl screed bed in cement 15mm mortor 1:4 and jointed and pointed in chemical resistant mortar as in floors all as specified and directed.
M&L for acid resistant tiles 15mm thick on vertical surfaces such as skirting/dado laid on 10mm screed bed in cement mortor 1:4 and jointed and pointed in chemical resistant mortar all as specified and directed
M&L machine cut kota stone slab flooring 20-25mm thick over and incl 20mm thick 1:6 cement sand screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for machine cut Kota stone 15-20 mm thick as in dado and pillar set over and incl 10mm thick 1:4 cement sand screed and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete all as specified and directed.
Providing precast concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in kerb stone with plain fair faces, including chamferes, weathering, throating etc and setting in mortar 1:4 complete with joints to match the tiles complete all as specified and directed.
M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as sub base of floor complete all as specified and directed.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.
M&L for PCC 1:3:6 type C-1, using 20mm graded stone agg as in surface channel and drains incl form work finished even and smooth using extra cement complete all as specified.
Extra for forming fair finished drain or channel exc 30cm inner girth in cement concrete using extra cement including forms moulds mitred/ stopped ends etc. complete all as specified and directed.
Reinforced concrete pipes, class NP2 300mm bore, laid and jointed complete with collars complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed
Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing the domolisd material out side of defence land all as specifed and directed
Dismantling Asbestos Cement Corrugated or Semicorrugated in Roof covering .
Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if type 3 or any all as per direction by Engr In Charge.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar includin gall quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles
Demolition of reinforcement cement Concrete in Roof, floors(Other than ground floors), beams, staircase, landing, chajjas and similar suspended work complete all as directed.
Taking down carefully existing bitumen tarfelt, including plaster of any description over the surfaces of roof, terraces including flashings and junctions of parapets/Curb walls etc and removing of the rubbish to a distance exc. 500m but n.exc. 1.00 Km and depositing where directed.
M&L for screed bed 15mm thick in cement mortar 1:4 mixed with Water Proofing Admixture as per manufacture instructions on concrete surfaces of roof slab finishing the surfaces even and smooth complete all as specified .
S&F for steel work in tubular section for purlin/rafters etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St- 240.
M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tesile strength of 550 Mpa as in roof covering to wall, fixed with self tapping screws as specified
M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified
M&L for Providing cement concrete as in coping PCC 1:2:4 Type B-0 using 12.5mm graded aggregate, with & including necessary form work Complete all as specified and as directed.
M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed.
M&L for coloured non skid ceramic tiles(Ist quality) 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc., laid over and including 15 mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L glazed ceramic coloured tiles(Ist quality) in vertical surface 375x 250x 7-8 mm/450x300 x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in Cement& Sand Mortar 1:4 complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20 to 25mm thick size not less than 22" x 22" laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15mm thick cement screed bed in cement mortar 1:6 including rubbing and mirror polishing complete all as specified and as directed.
M&L for Grinding/rubbing and polishing to exiting kota stone flooring including skirting/riser to achive mirror finish all as directed.
M&L for 50 mm thick Cement Concrete type D 2 (1:4:8) using 40mm graded stone aggregate as in sub bases, sub floors etc omplete all as specified and directed
M&L for rubber moulded concrete colour tiles with grey cement pigment of size of tiles not less than 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floor and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed.
Taking down Chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4.00 Sqm each.
Taking down Chowkhats or frame with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each.
Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm each
S&F Mild steel Framed work such as grills, gratings, etc using angle Iron, flat Iron, round bars with end of bars shouldered and or rivetted or forged into spikes, framed guard bars barred into iron doors, walkways railing framework amd similler work confiming to Fe 290, GDE E-165 all as specified and directed.
S&F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed.
S&F factory made steel windows, box type, any size ((XW2)M/F) double shutter, one openable shutter with glazing bars and other openable shutter without glazing bars, fabricated with members of standard size as shown on drawings including frames complete all as specified. Note :- The quoted rates shall be deemed of lugs and FI required for fixing wire cloth, Sheet Glass, Grills, iron mongry and guard bars as shown on drg and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast.
S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.
S&F for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete.
S&F for butt hinges, cold rolled mild steel , 100mm medium weight and fixed all as directed.
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F in repair for harrison rails 19/20mm thick, anodised aluminium alloy powder coated with fixing brackets, stops, rollers etc. compete all as specified as directed.
M&L for rendering 15mm thick other than fair faces of stone/brick masonry in cement mortar 1:6 on fair faces of stone masonry or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.
S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified and directed.
S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle including Flush Pipe of polyethylene of low or high density or PVC 32 mm dia for low level cisterns and brackets after taking down old cistern all as specified and as directed.
S&F in repairs Vitreous China Wash Hand Basins, size 550mm X 400mm with pedestal Ivory/superior colours 1105mm including 15mm CP Pillar coc, 32mm dia Brass Chromium Plated Waste Fitting and PVC connection pipe of 15mm x 600mm long, including suitable fixing arrangement,cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.
Dismantling water tanks Capacity exc 500 and not exc 1000 Litres of any description complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed.
S&F in repairs 20mm bore Ball valves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified. Make- Prayag or equivalent as approved by GE(Minimum wt 455 gms)
S&F in repairs 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed
S&F in repairs bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F Brass Chromium plated Tubular Towel rail, 20mm dia, D type, 60 cm long between flanges fixed to wall complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.
S&F 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.
S&F 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete as specified and directed.
S&F PVC (SWR) 75mm dia Floor Trap, plain with grating including jointing with solvent cement.
S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors all as specified and directed.
S&F PVC (SWR) bends 110mm dia any radius.
S&F PVC (SWR) junction single(Single T) equal or unequal with access door 110mm dia.
S&F PVC(SWR) reducers 110mm dia.
S&F PVC(SWR) Vent cowl 75mm dia.
S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors.
S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with Holder bat clamps of GI flat iron 25x3 mm all as specified and directed.
S&F PVC (SWR) bends 75mm dia any radius.
S&F PVC (SWR) junction single(Single T) equal or unequal 75mm dia.
S&F 110mm PVC (SWR) WC connector bent type all as specified and as directed.
M&L two coats of synthetic enamel paint on old steel surfaces of any description over 10cm width or girth including preparation.
Complete removal of existing treatment and preparation of surface of wall, washing,rubbing down and stopping of distempered and painted surface, incl applying two coat wallcare putty 2mm thick for smooth finished of the surface and applying two coat of oil bound distemper all as specified and directed.
M&L for applying two coat of oil bound distemper on decorated surfaces of walls including prepration of wall surfaces, applying two coat wallcare putty 2mm thick for smooth finished of the surface complete all as specified and directed.
M&L for prepararing surfaces plastered or unplastered old surfaces of ceilings and applying one coat of white wash complete all as specified & directed.
M&L for preparation of old surfaces by washing rubbing down and stopping of plastered surfaces and applying two coats of Cement based paint white or tined on walls including cornices etc complete all as specified and directed.
Taking down carefully copper/aluminium point wiring for one light/socket/power point and taking down of teak wood batten/ PVC casing caping and making good disturbed surfaces of walls/ ceiling/ floors etc including dismentling of fittings.
M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS and including wooden boxes fixed on wall with and including 3mm thick phenolic laminated sheet top cover for mounting switches, sockets, fan regulators etc complete all as specified.
All as per serial item No. 128.00 here-in-before but for one fan point controlled by one switch and regulator.
All as per serial item No 128.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
All as per serial item No 128.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
All as per serial item No 128.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlledby one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour
S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.
S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.
S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.
S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt complete all as specified and directed.
S&F ceiling rose surface Bakelite 65x50mm two or three terminals complete all as specified and directed.
S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube 6000K of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEXBHP71NW018 or equivalent of Philips/ Crompton Greaves/Bajaj/Wipro as approved by GE
S&F stepped type electronic fan regulator, flush type and connecting up ISI marked 240 volts complete all as specified & directed.
S&F ceiling fan 5 star rating complete of 1200mm sweep 240 volts AC including provision of hook in ceiling of suitable size for fixing incl neessary electric connection all as directed by Engr-in-Charge. Make : Havells / Crompton / Bajaj/Orient
S&F sheet metal enclosures, double door type, suitable for fixing MCB TPN with 200 Amps rated bus bar, 4 way, 415 volts complete all as specified and directed.
S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.
S&F MCB 63 Amps, triple pole & neutral, 415 Volts complete all as specified and directed. Make : Legrand/Havells/ABB
S&F MCB 32/40 Amps, single pole & neutral, 240 Volts complete all as specified and directed. Make : Legrand/Havells/ABB
S&F MCB 6-40 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed. Make : Legrand/Havells/ABB
S&F 2nd class hard wood rectangular block open recessed of size 60 x 45 x 5 cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawlplug(4 Nos), complete all as specified and directed.
S&F 2nd class hard wood rectangular block open recessed of size 30 x 25 x 5 cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawlplug(4 Nos), complete all as specified and directed.
S&F LED type street DRACO Series light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete, all as specified & directed. Make :- C&S Cat Part No LTESS20WLED or equivalent of Crompton Greaves / Wipro as approved by GE
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 35 sqmm 3.5 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 16 sqmm 2 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
M&L for brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.
M&L dry sand (Tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.
M&L 40mm grade GI pipe (light grade) for protection of LT cable fixed to wall/pole/road crossing including clamps complete all as directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.
S&F sub main wiring on including passing throuh PVC conduit pipe 1100 volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 Sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 4 sqmm of green colour confirming to IS 694/1990 including taking down existing unserviceable sub main wiring. (Note : Two runs of cable with one run of earth wire and one run of PVC casing caping should measured as one length).
S&F in repair adore LED lamp 9/10 watt complete all as specified and directed. Make : Havell's/Crompton/ Syska
S&F lamp holder PVC/Polycarbonatetype with back plate suitable forbatten fittings complete all as specified.
M/S JINDAL ENTERPRISES
AARSINFRATECH
Hitesh Construction
M/s Laxmi Enterprises
GAR CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .