REPAIRS TO JOINERY, FLOORING, SUNKEN FLOOR OF KITCHEN /TOILETS, PLASTERING, PLUMBING,SANITARY FITTINGS AND SERVICE TANK CLEANING ETC. AT MH AREA UNDER AGE B/R(SOUTH) NO. I OF GE (SOUTH) SECUNDERABAD

Amount

Taking down chowkats with shutter (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description not exc. 1.00 Sq.m each complete all as specified and as directed.

Taking down shutters of any description exc. 1.00 Sqm and n.exc. 2.00 Sqm each complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F of pressed steel frames of size 165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L for PCC 1:3:6 type C-0 (Using 12.5 mm graded stone aggregate) as in filling in pressed steel frame complete all as specified and as directed.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and as directed.

S & F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including treating the back of chowkats with coal tar black paint complete all as specified and as directed.

S&F mild steel flat iron hold fast of any size and similar articles confirming Fe 290 Grade E-165.

M & L for PCC (1;3:6) type C1 using 20mm graded stone aggregate as in bed blocks, copings, etc including necessary form work complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F for Factory made 35mm thick 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete all as specified and as directed by Engr-in-Charge.

S&F 35 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels ,commercial type complete all as specified and as directed.

S & F, steel windows with pressed steel frame and side hung shutters including projecting or box type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S & F, steel windows with pressed steel frame and side hung shutters including projecting or box type hinges with steel handle & steel peg stay, complete with out glazing bar, dovetailed or welded complete all as specified and as directed.

S & F, steel ventilators with pressed steel frame and top hung shutter including projecting/box type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded

S & F Anodised aluminium frame for doors, windows ventilators with one or more rebets including jointing cleats for fixing etc complete all as specified

S&F Anodised aluminium door shutter, aluminium section weighing 0.55 Kg per M including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified

S & F anodised aluminium window shutters, sliding type without sash bars aluminium sections weighing 0.55Kg per M including necessary jointing cleats, glazing chips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such a peg stays 150mm long (1No) hinges type B-21 100mm long (2No) suitable handle (1No) complete all as specified.

S & F brass Mortice lock 4 leavers vertical type size 100mm

S&F in repairs brass Mortice lock 4 levers vertical type of size 100mm

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty and fixed.

S & F in repairs 100mm long butt hinges extruted alluminium alloy with galvanised Mild steel hinge pin anodised and fixed type B21

S & F 150mm long floor door stopper of aluminium alloy boly and tongue anodised with hard steel spring fixed in floor

S & F Aluminium (Die cast ) body door closer hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and wt between 61 to 80 kgs complete all as specified and as directed.

S & F in repairs Aluminium (Die cast ) body door closer hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and wt between 61 to 80 kgs complete all as specified and as directed.

S & F 12mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with glazing clips complete all as specified and as directed.

S & F in repairs 12 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with glazing clips complete all as specified and as directed.

S & F sheet glass ordinary quality 5.5mm thick and glazing with oil putty/glazing clips of any description.

S & F in repairs sheet glass ordinary quality 5.5mm thick and glazing with oil putty/glazing clips of any description.

S&F 125mm long MS butt hinges, medium weight cold rolled.

S&F 75mm long MS butt hinges, medium weight cold rolled.

S & F 200mm long aluminium anodised barrel Tower bolts of extruted section and fixed

S & F 150mm long aluminium anodised barrel Tower bolts of extruted section and fixed

S&F 100mm long MS barrel tower bolt, stove enamelled black with bright bolts.

S & F 150mm long extruded aluminium alloy handles fabricated type anodised.

S&F 100mm long MS pressed handles oval type stove enamelled black.

S&F 250mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F in repairs 2nd class hard wood in fillets,squre, rectangular in section wrought, secured with nails sectional area exc 13 Sqcm and n.exc 25 Sqcm

S&F MS Framed work such as grills or gratting etc with ends of bars welded of any size and any design all as directed of Fe 290 Grade E-165.

S & F Statinless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples

S & F in repairs Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire

S&F second class hard wood 30mm thick Glazed and ske- leton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

S & F in reparis 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete all as specified and as directed.

Demolition wall and ceiling boards (fiber pulp insullation etc) or insullation boards / slabs, blankets any thickness including cover fillets

S & F in repairs anodised aluminium snap grid frame work for false ceiling of size 605 x 605mm including supporting wire complete all as specified and as directed.

S & F 4mm thick non-asbestos fibre cement building boards fixed or laid/inserted to aluminium frame work with screws including two coats of OBD over a coat of alkali resistant primer and preparation of new surfaces of ceiling.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar 100 mm dia

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar 75 mm dia

S&F in repair 75 mm dia, PVC (SWR) floor trap, plain with grating and jointing to waste pipe with solvent cement and fixed in PCC 1:2:4, type B1, complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) branch piece with access door, single 'Y'/'T' equal or un-equal complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

Dismantling water tanks capacity exc 250 ltrs and n.exc 500 ltrs.

Dismantling water tanks capacity exc 500 ltrs and n.exc 1000 ltrs.

S & F 500 ltrs capacity rotational moulded polyethelene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 15mm bore ball brass valve high pressure with polythene float and fly nut complete all as specified and as directed.

S & F 1000 ltrs capacity rotational moulded polyethelene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 15mm bore ball brass valve high pressure with polythene float and fly nut complete all as specified and as directed.

S & F in repairs 15mm dia ball brass valves high pressure with polyethelene float and fly nuts complete screwed for iron pipe or brass ferrule and fixed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc for tanks exc 250 and n.exc 500 ltrs.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc for tanks exc 500 and n.exc 1000 ltrs.

S & F in repairs 15mm bore tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed..

S & F in repairs 20mm bore tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth

S & F in repairs 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed .(Minimum weight 15mm-90gms/20mm-125gms)

S&F in repair bib tap 15 mm bore, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15mm bore Stop valves fancy type chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type),

S&F 300 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S&F vitreous china wash basin white flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed and fixed in repairs.

S & F in repairs, vitreous china bowl urinal, white, flat back, size of 465x355x265mm, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, pointing around urinal back in cement, complete.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repairs 10 ltrs capacity PVC valvless syphonic action type low level flushing cistern white colour with inlet, ball valve, float and handle complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, Low Level, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S, CP or aluminium hinging device, complete all as specified and as directed.

S & F in repairs water closet (squatting pan) complete incl provison of lime concrete bedding ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including flushing cistern and flush pipe, PVC connection of size 450mm , complete all as directed and as specified by Engineer-in-charge.

Demolition of brick work or stone/boulders masonry built in Cement Mortar or cement lime mortar complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class `B' brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as directed and as specified by Engineer-in-charge.

Taking down cement plaster from brick or stone walls etc., including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M & L Rendering 15mm thick in CM 1:6 on brick or concrete surfaces including finihsed the surface smooth and even without using extra cement complete all as specified and as directed.

M & L preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed

M & L preparation of new surfaces of walls and applying two coats of OBD over a coat of alkali resistant primming paint complete all as specified and as directed

M & L preparation of new surfaces of walls and applying two coats of colour wash over one coat of white wash complete all as specified and as directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for 25 mm thick, PCC 1:2:4, type B0 (using 12.50 mm graded stone aggregate) as in sub base complete all as specified and as directed

M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m in floors, set and jointed in neat cement slurry and pointed in colour cement to match and including laying over 15 mm thick screed bed in CM 1:6 , complete all as specified and as directed

M & L Non skid caramic coloured tile 7 to 8 mm thick (square/ rectangular ) area of eachtile exceeding .11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour to match over 15mm thick screed bed or bedding in layer of CM 1:6 for laying floor finishes complete all as specified and as directed

M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding in layer of CM 1:6 for laying floor finishes complete all as specified and as directed

M & L granite 20mm thick ( of any type) work (table robbed & polished) in steps , jambs , pillar, window cills, cooking platforms and laid over 15mm thick screed bed or bedding in layer of CM 1:4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, complete all as directed and as specified.

M&L Cement Concrete (design tiles) colour tiles 250 X 250 X 22mm thick jointed with white cement & pigment and pointed in colour / white cement to match the shade of tile over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate ) as in edging/ kerbs etc complete all as specified and directed.

M&L for sand cushion 20 to 30mm thick for fixing of inter locking tiles complete all as specified and directed by Engr-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design complete all as specified and directed by Engr-in-Charge.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid over 15mm thick screed bed or bedding in layer of CM 1:6and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , complete all as specified and as directed by Engineer-in-charge. .

M & L Glazed ceramic coloured tiles in vertical surface 300x200mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over 10mm thick rendering CM 1:3 on wall , complete all as directed and as specified by Engineer-in-charge.

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.

M&L for PCC 75mm thick type C1 1:3:6 (20mm graded stone aggregate) as in plinth protection laid in panels including finishing the surface fair and even without using extra cement complete all as specified and as directed.

S&F in Repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed.

S&F hasp & staple 100mm size aluminium anodised fixed with screws.

S&F continous (Piano) hinges , mild steel, bright finished or electrogalvanised width of flaps in 30mm complete all as specified and as directed

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and as directed.

ATUL ENTERPRISES

BEEGEE DESIGN SYSTEMS

VACON INFRASTRUCTURES

S.R.M.K Enterprises