Special repair renovation of 13 Nos. in Officer Colony in Sector 15A Faridabad 08 Nos. 1220 Sft area 4 Nos 1882 Sft area 1 No 2775 Sft area and 08 Nos 1250 Sft area quarter i.e House No. 1 to 8

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. Excavation work by mechanical ( HSR 4.14.1)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below (HSR 5.29.1)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (HSR 30.21)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (HSR 5.45)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm (HSR 5.43.2)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (HSR 10.62)

Laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (HSR 10.63.2) Size of Tile 600x600 mm (Tiles shall be Supplied by the department)

Laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 :3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. (HSR 10.67.2) Size of Tile 600x600 mm. (Tiles shall be Supplied by the department) (Tiles shall be Supplied by the department)

Providing and laying of Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling. (HSR 10.9)

Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1 :4 (1 cement: 4 coarse sand). Ordinary cement without any pigment ( HSR 10.30.4)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-inCharge-With cement mortar 1 :4 ( 1 cement : 4 fine sand) (HSR 30.16.1)

Flush pointing with cement mortar 1 :3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for prefixed flat tile bricks on top of mud phaska-With F.P.S. brick tiles (HSR 30.20.1)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 11.76) (Labour Rate)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. (HSR 11.77) (Labour Rate)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work ( HSR30.28.1) (Labour Rate)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work (HSR 30.27.1 ) (Labour Rate)

Finishing walls with Acrylic Smooth exterior paint of required shade-Old work (One or more coat applied @ 0.90 litre/10 sqm). (HSR 30.37.2) (Labour Rate)

Applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete (HSR 11.58) (Labour Rate)

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with sqm necessary screws (HSR 12.37.1)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 1 Okg/sqm) (HSR 30.54.1)

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge-Fixing with adjustable lugs with split end tail to each jamb (HSR 13.3.1)

Fixing white vitreous chinaware pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous chinaware flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (HSR 22.24.1) W.C. pan with ISI marked white solid plastic seat and lid (Labour Rate)

Fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. (HSR 22.221.2) (Labour Rate) Size 550 mm x400 mm x 815 mm

Providing and Fixing 600x450 mm bevelled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (HSR 22.209).

Fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. -15 mm nominal bore (HSR 22.105.1) (Labour Rate)

Fixing brass stop cock of approved quality: -15 mm nominal bore (HSR 22.97.1) (Labour Rate)

Fixing in position best Indian make C.P. brass Tooth Brush cum Tooth Paste Holder fixed in with rawl plugs with C.P. brass screws complete including cutting and making good the walls etc.- Tooth Brush-cum-Tooth Paste holder (HSR 22.213.1) (Labour Rate)

Fixing 8 mm dia C.P. I S.S. Jet with flexible tube up to 1 metre ong with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. (HSR 22.38) (Labour Rate)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, SI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank(HSR 22.181)

Fixing Unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.- 15 mm nominal bore with 30cm length (HSR 22.128.1) (Labour Rate)

Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. - 15 mm nominal outer dia Pipes HSR 22.86.1) (Labour Rate)

Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-25 mm nominal outer dia Pipes (HSR 22.85.3) (Labour Rate)

Fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platfonns, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels- Granite of any colour and shade- Area of slab over 0.50 sqm (HSR 8.26.2.2) (Granit shall be Supplied by the department) (Labour Rate)

Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-l(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately)- Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick confirming to 15:14587 (HSR 18.12.1)

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with- Decorative veneer facings of approved manufacture (HSR 8.19.1)

Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality- 1.0 mm thick (HSR 12.12.2)

Providing and fixing stainless steel baskets in kitchen ward robe of SS grade-304,crome finish fixed on channels of required size complete in all respect as desired by Engineer-in-charge. (The stainless steel basket shall be of premium quality of reputed manufacture) (NS) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material (i) Cutlery 17"x20"x4"

Multi Basket 17''x20''x6''

Grain Trolley 17”x20”x12”

Bottle pull out 10''x20''x8''

Plate 17''x20''x8''

Cup& saucer 17''x20''x4''

Carrousal 27''

channels 20''

Hinges

Handles

Edge binding

Fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required- Kitchen sink without drain board- 610x460 mm bowl depth 200 mm (HSR 22.10.2.2) (Labour Rate)

Fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete- Flexible pipe- 32 mm dia (HSR 22.14.2.1) (Labour Rate)

Recovery Items: The rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. . The reserve rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below the reserve price will be entertained and reserve price will be considered for all purpose in case the agency quotes lesser than reserve price.- Doors/ Windows @ 300/- Each

Pulkit Aggarwal

Raghubir Singh

RAJEEV ASSOCIATES

prashant construction company