PROVISION OF ROAD FURNITURE AND CERTAIN MISC WORKS IN CGRA KANKANADY ICGAE CGDHQ 3 OTM AT MANGALORE UNDER GE(I)(CG) GOA

Amount

SCH A PART-I (MISC SERVICES) Excavating in trenches for hard/dense soil n.exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

All as per Item No 1.00 for each additional 1.5m depth or part thereoff in depth beyond the first 1.5m complete all as specified and directed.

M & L Plain Cement Concrete 1:4:8 type D2 using 40mm graded stone aggragates as in foundation/mass concrete for wall and post struts complete all as specified and directed.

Returing filling in including spreading levelling watering in layers n.exc 25 cm complete all as specified and directed. Total Quantity = 65.00(Sch A Part-I) + 4.00(Sch A Part-III) = 69.00 Cum

Removing excavated material (soil) to a deistance exc 250 cum and n.exc 500 m and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M & L Mild steel TMT bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including Mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L Mild steel TMT bars 5mm dia and over up to and including 10mm dia & over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild steel wire (annealed) not less than 0.9mm dia or securing with clips stirrups, spaces and binders complete all as specified and directed.

M & L Reinforced cement concrete of M-30 design mix concrete using 20mm graded stone aggregate for coloumns, Pillars, Posts etc complete all as specified and directed.

M & L Reinforced cement concrete of M-30 design mix using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of form work to sides of pillars,posts, struts, piers, coloumns and stanchions including for fair finished surfaces complete all as specified and directed.

M & L for Pre-cast cement concrete block masonry with solid blocks type C1 1:3:6 (using 20mm graded stone aggregate) exc 10cm in width and setting in cement ortar 1:4 complete all as specified and directed

M & L Rendering 15mm thick in Cement mortar 1:4 on fair faces of stone masonry finished even and smooth without using extra cement complete all as specified and directed.

M & L Preparation of new plaster surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M & L Rolled mild steel Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections of Fe 410-W (Gde E-250 Quality -A) complete all as specified and directed.

S & F Rolled mild steel section of Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, clests etc complete all as specified and directed.

S & F Rolled mild steel section of Fe 410W (Gde E-250) quality A for 6mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment to bottom of GI pipe conforming to Fe-410W complete all as specified and directed.

M & L two coats of Synthetic enamel paint over a coat of zinc chrome red oxide on new steel surfaces of any description, not otherwise described over 10cm width or grith after preparation complete all as specified and directed.

S & F 10mm thick Multiwall polycarbonate sheet of any colour or texture as in roof covering/cladding to wall fixed with and including necessary aluminium flats/fittings and rubber gasket etccomplete all as specified and directed.

SCH A PART-II ( ROAD FURNITURE) S & F in repairs Speed breakers of size 500x400x75mm made of astronitrilite butadiene styrene (ABS) plastic resistance to severe impact and hazard weather conditions with dovetail interlocking type sub unit made to bind perfectly into one firm bump having pre- coloured materials(black/yellow) and UV stabilizer to keep them perpetually colourful studded with reflector on either and fixed with epoxy adhesive and nails reflector and glass elements are fixed on both sides of the rubber bumbs for better night vision available with pre colour materials complete all as specified and directed.

S & F in repairs vehicle viewing Convex mirror size 1.0 m dia have greater mirror thickness & reflectivity, material- polycarbonate, lens-unbreakable besides its ability to with fixed with and including mild steel pipe 80 mm dia, 4mm barrel thickness, 2.50m total height (1.90 m above GL and 0.60 m below GL) embedded with and including Plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) of repair vehicle size 0.60x0.60x0.60 m with and including excavation and earth work in any type of strata and removal of soil to a distance complete all as specified and directed. [NOTE: Make of vehicle viewing convex mirror shall be as directed and approved by GE]

S & F Delinator post spring loaded tubular with round base made of premium quality Poly-urethene material and height of 75 cm with reflective tape and complete all as specified and directed.

S & F Lenght of bench 6' feet Reinforced cement concrete pre cast decorative Bench with back and arm rest arrangment and all parts are joined together with galvanised nuts & bolts of suitable size ,bench tops and back planks are treated with special anti corrosive, water proof coating and surface glossy and components are manufactured by using M-30 grade of concrete for long use and to prevent damage during handling with thickness 60-100 mm, back height 650-1000 mm, front height 00-450 mm, base with 500-620 mm, Bench 3 seater complete all as specified and directed.

M & L Sparkle solar road studs with body made out of aluminium alloy shell cast matt finished with anti twist ribs on the bottom anchor of size aprox 125mm x 125mm x 25mm (shank 60mm) and solar battery of 1.2V/1600MA(Ni-Cd rechargable) with automatic dusk to dawn solar suit, view distance upto 1000 meters, Led-10mm, 3 pieces each side and total 6 pieces(with 10000 to 18000 mcd(milicandela) bearable weight 10 tonne (approx) including taking down old unserviceable stud complete all as specified and directed.

Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification complete all as specified and directed.

Supply & Laying of 60mm thick machine pressed precast concrete paver block any shape & size confirming to IS 15658-2006 of M-60 grade with grey cement and pigment etc complete all as specified and directed.

M & L 100mm thick Plain cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as sub base complete all as specified and directed.

M & L Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed.

M & L Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard and dense soil complete all as specified and directed.

M & L Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate including formwork for coping /haunching ,weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

SCH A PART-III [ E/M PART] S & F LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make : Havells/CG/Bajaj

M & L Sub main wiring with two runs of 2.5 Sq mm and one run of 2.5 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including/PVC Conduit Pipe (Medium grade) complete all as specified and directed. [NOTE:- two runs of 2.5 Sq mm + one run of 2.5 Sq mm and one run of PVC conduit pipe and its accessories of suitable size shall be measured as one unit length] Make:- Richa/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme/Richa

M & L MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and directed.

S & F MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. Make:- Legrand/Havells/Siemens

S & F MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. Make:- Legrand/Havells/Siemens

Supply, laying & testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 Sqmm 2 core complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in soft /loose soil complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M & L Spread fine river sand in trenches complete all as specified and directed. [Note: For measurement purpose, punned down thickness shall only be taken]

M & L laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and directed

M & L galvanised steel tubing 20 mm bore medium grade laid in trenches, road crossings pole/wall etc. for cable protection complete all as specified and directed . Make: Jindal/TATA/Nezone

Cutting of existing cement concret/butuminous road of size not less than 50mm for laying of electrical cable in GI pipe and makng good to the disturbed surfaces by providing PCC or same material after laying of electrical cables and returning filling of soil complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connected by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and directed.

VITTAL P NAYAK

M/S V ASSOCIATES

KOTIAN -ECC

S M Shetty