Restoration and up-gradation of Bridge near Nirankari Bhawan, Shastri Nagar, Jammu

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Designing, Commissioning and Construction of 16.00 Mtrs RCC Motorable(5.5 mtrs carriage wav width) with 1.2m footpath & railings on both sides of bridge on EPC mode (Engineer Procurement and Construction) alongwith construction of approaches on both sides, RCC wearing coat, including Dewatering/pumping out water from irrigation canal / seepage/ broken water rains etc. including there construction of side walls & bed of irrigation canal damaged during execution of work & Site investigation as per IRC/MORTH specification, Hydraulic data investigations, supply of all drawings duly vetted by Design Directorate/IIT/NIT (Complete job).

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

Providing and applying tack coat using hot straight run bitumen of grade–VG-30, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On bitumen surface @ 0.50 Kg/sqm.

Disposal of excavated earth / mulba for an avg. lead of 10 Kms.