REPAIRS TO ROAD FURNITURE AND ROAD PAINTING/MARKINGS OF AGE B/R-I UNDER GE (WEST) LUCKNOW

Amount

Providing & fixing as in repair of "Cat Eyes " of size not more than 130 mm and height not more than 20 mm made out of strong engineering high impact resistant polymer with electronic welded lenses for retro reflective in dry and wet weather conditions along road complete all as specified and directed.

M & L for providing and laying 2.5 mm thick hot applied thermo plastic road marking paint on roads, pavements and the like exc 10cm wide in uniform thickness with glass beads as per clause no 803 of MORTH specification including cleaning of roads surface, heating the materials with in specified tempreture limits for marking with all necessary arrangements required complete all as specified and directed.

M & L for providing and laying 2.5 mm thick hot applied thermo plastic road marking paint on roads, pavements and the like n. exc 10cm wide in uniform thickness with glass beads as per clause no 803 of MORTH specification including cleaning of roads surface, heating the materials with in specified tempreture limits for marking with all necessary arrangements required complete all as specified and directed.

Material and Lobour for metal road delinators made out of 75mm bore medium grade MS pipe of length 80cm embeded with PCC 1:3:6 of size 30cm x30cm x 30cm using 20mm graded stone aggregate 30cm below road level including taking down existing corroded/broken delinators and applying tow coats of synthetic enamel paint over a coat of zinc chrome paint and fixing with high intensity prismatic reflective tapes of 137.5mm width red colour in 2 pieces and 137.5mm yellow/white colour 1 piece alternatively all as specified and directed by GE.

Preparation of old external treated surface of concrete/kerb stone surfaces, facias, cornices etc by complete removing all scale, loose material dust etc for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm

Supply and Fixing in repair Solar road studs having 3 LEDs of colour red/yellow to a side (total 6 Nos) housed in a tough pressure casted aluminium alloy of size 125 x 125mm with built in stem of suitable length for fixing with epoxy. LEDs, solar -cells, 1600MAH battery & light sensor well protected inside under tough unbreakable polycarbonate transparent sheet roof, system workable for 2-3 days (nights) after full charge in 8-10hours complete all as specified and directed.

Taking down old sign board of any description including frame work complete all as specified and directed.

Supply and Fixing with stainless steel frame including necessary clamps etc retro-reflective double sided road name signboards comprising of 4mm thick aluminium composite panel (ACP) mill finished or PDVF coated or as specified as base board, micro prismatic retro-reflective sheet and electro cut coloured overlay film. The aluminium composite panel (ACP) shall have a thickness of 4mm with 0.5mm thick skin of aluminium on both sides. The ACP shall be routed, folded and fixed on the stainless steel frame with VHB tape, 24mm wide and 2.3mm thick provided through out the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping ss screws 5mm dia spaced not more than 300mm center to center ensuring that no reveting is seen on either face of the frame. On the front and back face of the ACP, micro prismatic retro-reflective sheet confirming to Type-XI or IRC: 67:2012 shall be pressure fixed as background sheet which will be over laid with electro cut transparent film of approved make and colour to create a desired road name information message, The rate shall include all materials, labour,equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of Engineer-in-Charge.

Supply and fixing 50mm dia and 1.80mm thickness of wall stainless steel pipe for framing of sign board including cuttng, welding and framing of stainless steel structure complete all as specified and directed.

Excavation post holes (or similar holes) in soft/loose soil each n. exc 0.5 Cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm complete all as specified and directed.

Material and Labour for PCC type C2 (1:3:6) 40mm graded stone aggregate as in foundation filling and mass complete all as specified and directed.

S&F of 18 mm Factory made single extruded WPC (Wood Polymer Composite) solid white colour for CNC Jallie for boundry Wall/Compound Wall and other utility cover etc having minium density of 650 kg/cum comprising of virgin polymer of K value 58-60 (suspension grade), Calcium carbonate and natural fibers (wood powder/ Rice husk/ Wheat Husk) and non taxic additivies (maximum toxicity index of 12 for 100 gms) and screw with drawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strenth 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of fleme of class A category with property of being termite/borer proof, water/moisture proof and fire retradant complete all as specified and directed.

Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed.

M & L for hard core of broken stone or boulder of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete including filling interstices with approved fine material like earth or grit etc.

M & L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and as directed.

M & L for 60 mm thick rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L sand cushining under interlocking paver blocks complete all as specified and as directed.

M & L for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings complete all as specified and directed.

M/s SHIVAM CONSTRUCTIONS (BID ID -3268831)

M/S SWATI CONSTRUCTION (BID ID -3268290)

Shri Siddhi Vinayak Builders (BID ID -3268323)