GE(W)HSR-45 of 2019-20 PROVN OF IMPROVEMENT OF WATER SUPPLY SYSTEM AUGMENTATION OF WATER SUPPLY AND REVENUE WORK AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Excavation in trenches in soft/loose soil n. exc. 1.5 mtr deep and not exceeding 1.5 mtr in width for taking up/down underground water tubing and/or laying of CI/GI pipes (new or old) of any dia and getting out complete all as specified and as directed.

Demolition/Dismantling in PCC hard standing/plinth and bituminious road any thickness for taking up/down underground water tubing and/or laying of CI/GI pipes (new or old) of any dia and getting out complete all as specified and as directed.

Removal of surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from starting point complete all as specified and as directed.

Returning filling in including spreading, in layers not exceeding 25 cm thick in any type of soil after the existing water pipe lines have been taken up/out and new pipe line laid and tested complete all as specified and directed.

M&L for Sand filling in trenches with clean dry fine sand unwashed 8cm thick below cable and 15 Cm thick after laid thincluding gently punning around cables complete all as specified and directed Note : 18cm punned thickness shall be measured and paid

M&L for bricks covering to under ground electric cable using sub class 'B' bricks laid dry, flat, perpendicular to the direction of the cable complete all as specified and directed.

Supply, Laying, jointing and testing mild steel pipe 100 mm bore, heavy grade, ISI marked, with all fittings like sockets flanges, unions, bends, elbow etc laid in trenches or along wall and in floors etc including necessary welding and fabrication works complete all as specified and as directed (Note: Excavation and earth work shall be measured and paid for separately)

Supply, Laying, jointing and testing galvanized iron pipe 100 mm bore, medium grade, ISI marked, with all fittings like sockets flanges, unions, bends, elbow etc laid in trenches or along wall and in floors etc complete all as specified and as directed (Note: Excavation and earth work shall be measured and paid for separately)

Supply, Laying, jointing and testing galvanized iron pipe 20 mm bore, medium grade, ISI marked, with all fittings like sockets flanges, unions, bends, elbow etc laid in trenches or along wall and in floors etc complete all as specified and as directed (Note: Excavation and earth work shall be measured and paid for separately)

Supply, Laying, jointing and testing galvanized iron pipe 25 mm bore, medium grade, ISI marked, with all fittings like sockets flanges, unions, bends, elbow etc laid in trenches or along wall and in floors etc complete all as specified and as directed (Note: Excavation and earth work shall be measured and paid for separately)

Supply, Laying, jointing and testing galvanized iron pipe 50 mm bore, medium grade, ISI marked, with all fittings like sockets flanges, unions, bends, elbow etc laid in trenches or along wall and in floors etc complete all as specified and as directed (Note: Excavation and earth work shall be measured and paid for separately)

Supply, Laying, jointing and testing Ductile iron pipe 250 mm bore with Spigot and socket ends (ISI Marked) centrifugally cast of class K-9 including rubber joints and in any length, laid in trenches complete all as specified and as directed (Note : Excavation and earth work, Cast iron/DI fittings shall be measured and paid for separately).

Supply, Laying, jointing and testing Ductile iron pipe 200 mm bore with Spigot and socket ends (ISI Marked) centrifugally cast of class K-9 including rubber joints and in any length, laid in trenches complete all as specified and as directed. (Note: Excavation and earth work, Cast iron/DI fittings shall be measured and paid for separately).

Supply, Laying, jointing and testing Ductile iron pipe 150 mm bore with Spigot and socket ends (ISI Marked) centrifugally cast of class K-9 including rubber joints and in any length, laid in trenches complete all as specified and as directed (Note : Excavation and earth work, Cast iron/DI fittings shall be measured and paid for separately).

Supply, Laying, jointing and testing Ductile iron pipe 150 mm bore with Spigot and socket ends (ISI Marked) centrifugally cast of class K-7 including rubber joints and in any length, laid in trenches complete all as specified and as directed (Note : Excavation and earth work, Cast iron/DI fittings shall be measured and paid for separately).

Supply, Laying, jointing and testing Ductile iron pipe 100 mm bore with Spigot and socket ends (ISI Marked) centrifugally cast of class K-7 including rubber joints and in any length, laid in trenches complete all as specified and as directed. (Note: Excavation and earth work, Cast iron/DI fittings shall be measured and paid for separately).

S&F cast iron body sluice valve class ‘PN-1.6 IS -14846 marked, 100 mm bore, both flanged ends and drilled, with forged steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, complete, all as specified & directed.

Description same as per srl item No. 17 here in before but PN -1.6 of size of sluice valve 150mm bore.

Description same as per srl item No. 17 here in before but PN 1.6 of size of sluice valve 200mm bore.

Description same as per srl item No. 17 here in before but PN 1.6 size of sluice valve 250mm bore.

Description same as per srl item No. 17 here in before but PN 1.6 size of sluice valve 300mm bore.

S&F cast iron body sluice valve class ‘PN-1, IS -14846 marked, 100 mm bore, both flanged ends and drilled, with forged steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, complete with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, complete, all as specified & directed.

Description same as per srl item No. 22 here in before but PN -1, of size of sluice valve 150mm bore.

M&L for cast iron fittings or specials for flanged / spigot socketed end pipe 200mm to 350 mm bore conforming to IS-1538 and ISI marked such as bends , tapers, tee pieces (single & double branch) any type, and angle/radios amd Straight connecting pieces but all ends flanged complete (joints, excavation and earth work shall be measured and paid separately)

M&L for cast iron fittings or specials for flanged / spigot socketed end pipe upto 150 mm bore conforming to IS-1538 and ISI marked such as bends , tapers, tee pieces (single & double branch) any type, and angle/radios amd Straight connecting pieces but all ends flanged complete (joints, excavation and earth work shall be measured and paid separately)

M&L for plain cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate 100mm thick as in road cutting and foundation of pumping set etc including necessary form work & finishing the surface even and fair without using extra cement complete all as specified and directed .

Supply, Installation, Testing and Commissioning of Centrifugal pump set capacity 30HP, 415V, 3phase set with electric motor, having discharge capacity of 160Cum/Hr, 1500 RPM, 35 mtr head, complete all as specified and directed.

S&F PVC insulated and PVC sheathed, multistranded copper conductor cable 10 sqmm single core cable confirming to IS 694 including necessary connections complete all as specified and directed .

S&F non return valve of size 100mm bore of class PN -1 (ISI marked) , cast iron body, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed.

S&F non return valve of size 150mm bore of class PN -1 (ISI marked) , cast iron body, both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed.

M&L for cutting cast iron 150 mm bore pipes for insertion of new tees, branch and reducing to required length complete all as specified and directed. (Note :Both sides cut shall be measured as one unit)

M&L for cutting cast iron 250 mm bore pipes for insertion of new tees, branch and reducing to required length complete all as specified and directed. (Note :Both sides cut shall be measured as one unit)

M&L for cutting cast iron 200 mm bore pipes for insertion of new tees, branch and reducing to required length complete all as specified and directed. (Note :Both sides cut shall be measured as one unit)

M&L for run lead joint for 150 mm bore cast iron pipe and fittings including material like lead, spun yarn, caulking etc complete all as specified.in new pipes / in leaking joints including dewatering the trenches/ pits where ever required complete all as specified and directed.

M&L for run lead joint for 100 mm bore cast iron pipe and fittings including material like lead, spun yarn, caulking etc complete all as specified.in new pipes / in leaking joints including dewatering the trenches/ pits where ever required complete all as specified and directed.

M&L for run lead joint for 200 mm bore cast iron pipe and fittings including material like lead, spun yarn, caulking etc complete all as specified.in new pipes / in leaking joints including dewatering the trenches/ pits where ever required complete all as specified and directed.

M&L for run lead joint for 250 mm bore cast iron pipe and fittings including material like lead, spun yarn, caulking etc complete all as specified.in new pipes / in leaking joints including dewatering the trenches/ pits where ever required complete all as specified and directed.

S&F steel tubes, light grade, galvanised, 50 mm dia laid in trenches/ on poles/ on walls for cable protection complete all as specified and directed.

S&F steel tubes, light grade, galvanised, 40 mm dia laid in trenches/ on poles/ on walls for cable protection complete all as specified and directed.

Supply, laying, jointing and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed. (Note: Excavation and earth work, sand and brick shall be measured and paid for separately)

Supply, laying, jointing and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm, 4core complete all as specified and directed. (Note: Excavation and earth work, sand and brick shall be measured and paid for separately)

M&L for earthing complete with GI earth plate electrode 60 x 60 x 6 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized earth strip of size 25x3mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I and including necessary excavation and earth work in any type of soil, removal and refilling of soil and funnel with wire mesh and light grade GI watering pipe 20mm dia, Chamber in PCC 1:3:6, type C1 using 20mm graded stone aggregate and 40mm thick cover in RCC 1:2:4, type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways, handle with 16mm dia round bars and 40mm dia light grade GI pipe upto 7.5m for protection and connected to earthing test point complete all as specified and directed. Note:- (i) GI earth strip upto 7.5m shall be measured and paid. (ii) PCC chamber shall be provided 50cm away from tthe plinth of building.

M&L for construction of brick masonry valve pit of size 1050 mm X 1050 mm X 1050 mm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 X 40 X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCC foundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping complete all as specified and directed.

M&L for construction of brick masonry valve pit of size 1200 mm X 1200 mm X 1200 mm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 X 40 X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCC foundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping complete all as specified and directed.

M&L for construction of brick masonry valve pit of size 600 mm X 600 mm X 600mm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40 X 40 X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCC foundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping complete all as specified and directed.

S&F 40mm dia PVC conduit pipe medium including all fittings mounted on wall / floor complete all as specified and directed.

S&F cast iron foot valve with strainer of size 150mm bore , both ends flanged and drilled, including nuts, bolts, washer and neoprene rubber gasket joint complete all as specified and as directed.

M&L for mild steel Channel, Angles, supports, clamps and back plates including nuts, bolts, washers, welding, bending cold or hot drilling holes in any shape and any size as required including two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply, Installation, Testing and Commissioning of open well submersible pump set with capacity 15HP, 415V, 3phase set with electric motor, having discharge capacity of 100mmx100mm complete all as specified and directed.

S&F PVC insulated and PVC sheathed, multistranded copper conductor Submersible cable 6 sqmm 3 core flat cable confirming to IS 694 including necessary connections complete all as specified and directed .

M&L for cutting cast iron 100 mm bore pipes for insertion of new tees, branch and reducing to required length complete all as specified and directed. (Note :Both sides cut shall be measured as one unit)

S&F Gun metal gate valve ISI marked with iron wheel head of size 20mm bore complete all as specified & directed.

S&F Gun metal gate valve ISI marked with iron wheel head of size 25mm bore complete all as specified & directed.

S&F Gun metal gate valve ISI marked with iron wheel head of size 50mm bore complete all as specified & directed.

M&L for and tapping of 100/150mm bore cast iron water mains ( in position ) for branch connection of 20mm bore pipe including MS clamps nuts bolts washers etc complete all as specified & directed.

virendra constructions

fauji electric works

m/s Rajesh Kumar