PROVN OF TOILET BLOCK AT SARVA DHARMA STAL AND SPL REP TO BLDG NO T-162, T-163 AND T-181/4 AT BRICHGUNJ MIL STN

Amount

Surface dressing in soft/ Loose soil and getting out n. exc 15 cm deep complete all as specified and as directed.

Surface excavation n.exc 30 Cm deep and averaging 15 Cm deep and getting out in Hard/ dense soil, etc complete all as specified and directed.

Excavation over areas n.exc 1.5m deep and getting out in any type of soil complete all as specified and as directed

Excavating in trenches in Soft/ loose Soil n. exc 1.5 m wide and n. exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and n. exc 1.5 m in depth and getting out complete all as specified and directed.

Excavation in trenches in hard/dense soil n. exc 1.5m deep and n.exc 1.5m wide and getting out, etc complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed

Material and Labour for moorum filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, leveled and rammed including watering complete all as specified and as directed

Material and Labour Coarse ggregate(Kankar or Laterite) grading 1, 90 to 40 mm size compete all as specified and directed.

Material and Labour for hardcore of gauge exceeding 63mm but n.exc 100mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and Labour broken stone or boulders hard core of gauge n.exc.63 mm, deposited, spread and leveled in layers n.exc. 15 Cm thick, watered and rolled/rammed to a true surface, etc complete all as specified and directed.

Dismantling for plain or corrugated roof sheeting of any description, any gauge, thickness, including removing L-type or J-type bolts in Roof Covering complete all as specified and as directed.

Dismantling for asbestos cement (corrugated, semicorrugated, etc.) sheets in roof covering complete all as specified and as directed .

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets Including frame of any description and any thickness, fixed in any position complete all as specified and as directed

Taking down shutter of any description not exceeding 1 Sqm each complete all as specified and as directed

Taking down cement plaster any description from wall / ceiling, including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and as directed.

Taking down shutter of any description exceeding 1 Sqm each and not exceeding 2 Sqm each complete all as specified and as directed

Taking down chowkhats or frames not exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and as directed.

All as per item No 18 here in before but exc 1.5 sqm but n exc 4 sqm each.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level complete all as specified and as directed

Demolition of solid block masonry of any description complete all as specified and as directed

Use and waste of formwork to edges of rough finished surfaces of concrete flats, window cills, concrete railing etc not exc 20cm wide complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter complete all as specified and as directed

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc complete all as specified and as directed

Use and waste of formwork to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) complete all as specified and as directed

Use and waste of form work rough finished surfaces of square or rectangular pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Use and waste of form work to chullah hoods, chajja, troughs and similar items including edges rough finished surfaces of concrete complete all as specified and as directed.

Material and Labour for 25 mm thick DPC using plain cement concrete 1:2:4 Type B0 (12.5mm graded aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.

Material and Labour for 75 mm thick, plain cement concrete 1:4:8 Type D2 (40mm graded aggregate),in sub base of flooring/hard standing etc complete all as specified and as directed.

Material and Labour for PCC 1:3:6 Type C2 using 40 mm graded stone aggregate as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for CI pipe 150 mm bore complete all as specified and as directed.

Material and Labour PCC 1:3:6 Type C1 using 20 mm graded stone aggregate as in plinth protection, of 75 mm thick finished fair and even, using extra cement complete all as specified and as directed

Material and Labour PCC 1:4:8 Type D2 (40mm graded stone aggregate) 100mm thick for paving, sub base of flooring/hard standing, path etc complete all as specified and as directed

Material and Labour 75mm thick PCC (1:2:4) Type B1 using 20mm graded stone aggregate as in flooring finished even and smooth using extra cement complete all as specified and as directed.

Material and Labour 100 mm thick PCC 1:3:6 Type C2 using 40 mm graded stone aggregate as in sub bases complete all as specified and as directed

Material and Labour for pre-cast cement concrete solid block masonry with solid block using cement concrete 1:3:6 Type C1 (20mm graded stone aggregate) not exceeding 10cm in width, set in cement mortar 1:4 complete all as specified and directed.

Material and Labour for Plain cement concrete 1:4:8 Type D2 (using 40mm graded aggregate) as in foundation, filling mass concrete complete all as specified and as directed

Material and Labour PCC 1:2:4 type B2 (using 40mm graded agg) as in foundation filling and mass concrete etc complete all as spd and directed.

Material and Labour for PCC 1:3:6 type C2 (using 40mm graded aggregate) as in foundation of manholes complete all as specified and as directed.

Material and Labour for PCC in foundation of drain or channel bed etc 1:3;6 Type C2 (40 mm graded stone aggregate) complete all as specified and as directed

Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds stopped ends complete all as specified and as directed.

Extra for forming fair finished drain or channel exc 30cm and n. exc 80 cm inner girth in cement concrete using extra cement including forms, moulds, mitred /stopped ends etc complete all as specified and as directed.

M & L Precast cement concrete hollow block masonry 1:2:4 Type B0 (using 12 mm graded stone aggregate) as in block masonry with Hollow bocks, 10cm Thick and set in cement mortar 1:6 compete all as specified and directed.

Material and Labour for pre-cast cement concrete block PCC 1:3:6 Type C1 (20mm graded stone aggregate) masonry with solid block exc 10cm in width and setting in CM 1:6 complete all as specified and as directed

Material and Labour for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, Type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 complete all as specified and as directed.

Material and Labour for RCC M-30 (design mix) for foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

Material and Labour for RCC M-30 (design mix) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and Labour for PCC 1:2:4 Type B1 as in coping surface channels, benching etc of manholes finished fair and even as in cills, steps and other similar bands, plinth course, complete all as specified and as directed

Material and Labour for RCC M-30 (design mix) for beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed

Material and Labour for RCC M-30 (design mix) 20mm graded stone agg. for chajjas complete all as specified and as directed.

Material and Labour for M-30 (Design mix) for columns, pillars, piers, posts and struts complete all as specified and as directed

Material and Labour precast RCC 1:2:4 Type B1 (using 20 mm graded stone of agg) but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cm 1:4 complete all as specified and as directed.

Material and Labour for TMT bars as in reinforcement 10 mm dia and over cut to length bent to shape required incl cranking, bending, hooping ends and binding with MS wire (annealed) not less than 0.9 mm dia) complete all as specified and as directed

All as per item No. 53 here in before above but 6 mm to 8 mm dia TMT bars

M&L for TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers, and binders in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire.

Supply and Fix Plates plain channels, Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe- 410-W(Gde E-250) quality B complete all as specified and as directed.

Supply and Fix mild steel flat iron 40 x 3mm as in wind tie including all necessary drilling, bolting or riveting etc., confirming to Fe 290 complete all as specified and as directed

Supply and Fix for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A,etc complete all as specified and as directed

Supply and Fix Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed

Supply and Fix Mild steel bolts exc 12mm n' exc 20mm dia , purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long complete all as specified and as directed

Material and Labour for MS work such as rung, handles to manholes, etc. complete all as specified and as directed

Material and Labour for rendering 10 mm thick CM 1:4 on concrete surfaces of roof slab mixed with WPC @ 3% water proofing compound complete all as specified and as directed. Note: Supply only WPC will be measured and paid seperately

Material and Labour 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surface, etc complete all as specified and as directed.

Material and Labour for rendering 5 mm thick in CM 1:3 on ceiling finished even and smooth without using extra cement etc complete all as specified and as directed.

Material and Labour 10mm thick rendering in cement plaster 1:4 on fair faces of brick or concrete surface,and finishing the surface even and smooth w/o using extra cement etc completed all as specified.

Material and Labour for rendering 10 mm thick in CM 1:6 finished even and smooth without using extra cement and making the surface finish by applying 3 mm thick wall care putty on wall all complete all as specified and as directed.

Material and Labour for rendering 15 mm thick in one layer on concrete surface in cement mortar 1:4 mixed with WPC @ 3% by weight of cement finished fair and even without using extra cement complete all as specified and as directed. Note: Supply only WPC will be measured and paid seperately

Material and Labour for 15 mm thick rendering in CM 1:4 on concrete surfaces finished fair and even complete all as specified and as directed.

Supply only integral water proofing compound

Material and Labour applying two coats of cement base paint over a coat of white wash on new plastered or untreated surface of wall including preparation of wall surfaces all as directed and specified

Material and Labour for three coats white wash on newly plastered wall including preperation of surfaces complete all as specificed and as directed

Material and Labour for preparing new wall surface & applying two coats distemper oil emulsion white or tinted over a coat of priming coat complete all as specified and as directed

Material and Labour preparation of old plastered wall surfaces/concrete prefabricated pannel and applying one coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Material and Labour for preparing new ceiling surfaces & applying two coats distemper oil emulsion white or tinted over a coat of priming coat complete all as specified and as directed

Material and Labour for Oil Bound Distemper two coats over a coat of primer after taking down complete removal of existing treatment from old plastered surfaces of wall complete all as specified and directed

Material and Labour for preparing new steel/iron surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Material and Labour for preparation of old steel surfaces of any description over 10cm width/girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and Labour for preparation new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

Material and Labour for applying two coats of acrylic emulsion paint exterior quality over a coat of primer (with antifungal properties) on external wall surfaces including preparation of newly plastered surfaces etc, complete all as specified and as directed.

Material and Labour for applying two coats of acrylic emulsion paint extreior quality over a coat of primer (with antifungal properties) over old external wall surfaces including complete removal of existing treatment etc, complete all as specified and as directed.

Material and Labour for Chequred cement concrete tiles with grey cement and pigment of size 300x300x25 mm, set jointed and pointed in neat cement slurry over 20mm thick screed in CM 1:4 complete all as specified and as directed.

Material and Labour non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 20mm thick screed bed in CM 1:4 complete all as specified and as directed

Material and Labour for glazed coloured ceramic tiles of size 350 x 250 x 7mm /450x350x7mmthick, on vertical surfaces such as skirting dados and risers to steps etc, including 10mm thick rendering in cement plaster 1:3, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed

Material and Labour for coloured matt finished ceramic tiles joint free area exc 0.11 sqm but n.exc 0.18 Sqm, set and jointed in neat cement slurry in floors and pointed with coloured cement to match including cement mortar screed bed 20mm thick 1:4, complete all as specified and as directed

Material and Labour for glazed coloured ceramic tiles of size (450 x 300) x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc, including 10mm thick rendering in cement plaster 1:3, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed by Engineer-in-Charge

Material and Labour coloured vitrified joint free tiles light shade of size 600 x 600 x10mm thick, set and jointed in neat cement slurry in floors and pointed with coloured or white cement to match including cement mortar screed bed 20mm thick 1:4, complete all as specified and as directed.

Material and Labour for Dark coloured vitrified tiles 10 mm thick (square/rectangular) polished, area of each tiles n. exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed with coloured or white cement to match including screed bed 20mm thick 1:4, complete all as specified and as directed.

Material and Labour for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including backing coat 20mm thick in CM (1:3) complete all as specified and as directed

Material and labour for false ceiling with aluminum grid work (Size of grid 600x600 mm) with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle and suspended with 2mm dia GI wire hooked to roof with needful adjustment bolts at an interval of 1.20 m centre to centre staggered and board with Eco board decorative type size 600 x 600 x 4 mm thick finished with two coats of oil bound distemper over a coat of primer on exposed surfaces all as specified and directed.

Supply and Fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as complete all as specified and as directed.

Supply and Fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.

Supply and Fix Aluminium anodised barrel tower bolt of extruded section of size 150 mm long complete all as specified and as directed

Supply & Fix door stopper of brass & aluminium body alloy body and tounge anodised with hard drawn steel spring of overall length of cover plate 140mm complete all as specified and as directed.

Supply and Fix 150mm long extruded, aluminium alloy, anodised, handles, fabricated type, complete all as specified and as directed.

Supply and Fix Butt hinges, of size 100 mm length extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 complete all as specified and as directed

Supply and Fix in Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified and as directed

Supply and Fix Aluminium door closer hydraulically regulated of extruded section, universal type suitable for door shutters of 701 to 850mm in width and weight between 36 to 60kg complete all as specified and as directed.

Supply and Fix Aluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

Supply and Fix in repairs Aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed.

Supply and Fix in repairs decorative type curtain rod aluminium alloy including anodised decorative brackets etc complete all as specified and as directed.

Supply and Fix in repairs bracket decorative type brass chromium plated aluminium alloy anodised for 20mm dia curtain rod complete all as specified and as directed

Supply and Fix brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges 60 cm long complete all as specified and as directed

Supply and Fix in repairs decorative stainless steel curtain rod with matching brackets/closures of dia 25mm internal /27mm outer dia fixed with S/S flat section to walls by screwing, etc complete all as directed and specified. Note: Brackets/closures will be paid separately as supply only.

Supply only decorative end closures for curtain rod for Item No. 103 here in before.

Supply and Fix solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

Supply and Fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame complete all as specified and directed by Engineer-in-Charge.

Material and Labour 30 mm thick flush shutter solid core construction, with particleboard core complete all as specified and as directed.

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on one side with decorative choice lamination and other side white lamination fixed to Aluminium frame etc all as specified and directed by Engineer-in-Charge .

Supply only 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only aluminium anodised fly proof mesh 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium straps complete all as specified and as directed.

Supply and Fix Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply and Fix vitreous china wash hand basin with flat back size 550 x 400 mm including 15 mm dia fancy type pillar tap chromium plated CP waste coupling, chain and plug, waste fitting, union and waste pipe 32 mm dia of required length and all necessary 450 mm long outlet and inlet PVC connections pipe with PTMT check nuts complete all as specified and as directed.

Supply and Fix in repairs coloured Toilet paper holder, vitreous China, box type fixed to wall with chromium plated brass screws.

Taking up or down, 15mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed.

Taking up or down, 25mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed

Supply and Fix in repairs 32mm dia PVC waste pipe for wash hand basines, complete all as specified and as directed.

Material and Labour for 15 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Material and Labour for 20 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Material and Labour for 25 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Supply and Fix 75 mm bore PVC (SWR)bend any radius

Supply and Fix PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed

Supply and Fix 110 mm bore PVC (SWR)bend any radius

Supply and Fix PVC (SWR) vent cowl, bore of pipe in 75 mm, etc complete all as specifed and directed.

Supply and Fix in repairs for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 75 mm, etc complete all as specified and directed.

Supply and Fix 110mm bore of PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed

Supply and fix 25 mm bore GI tubing medium grade laid in trenches / floor or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and directed

Supply and laying of GI tubing light grade of 40mm dia with all fittings for protection of U/G Cable laid in trenches all as per directed by Engr-in-Charge,

Supply and fix 40 mm bore GI tubing medium grade laid in trenches / floor or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and directed

Material and Labour for 150mm dia CI pipe (sand cast) in any length with (or) without ear laid in trenches and jointed in CM 1:1 complete all as specified and as directed

Supply and Fix in repairs 15mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms, complete all as specified and directed

Supply and Fix stop valves 15 mm chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

Supply and Fix Stop valves / Angular cock cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for 15mm dia iron pipe or for union and fixed.

Material and Labour 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed

Supply and Fix in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed

Supply and Fix PVC (SWR) junction single, (Single T) equal or unequal, bore of pipe in 110 mm, with access door etc complete all as specified and directed.

Supply and Fix in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed

Supply and Fix in repairs stop valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed complete all as specified and as directed.

Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed

Supply and fix 25 mm bore Gun Metal gate valve with iron wheel head ISI Marked screwed both ends suitable for GI tubing complete all as specified and directed

Supply and Fix cast iron nahani traps with CP grating incl jointing to waste pipe in run lead joint for 75mm dia out let, complete all as specified and as directed

Material and Labour for cutting existing 50mm GI line and making branch connection of 40 mm dia GI line complete all as specified and directed

Supply and Fix in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed

Supply and Fix in vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including 10 Ltr capacity low level flushing cistern with flexible pipe and necessary Pvc connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and Fix in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix in repair glass Corner shelf Cat No 1173 of Jaquar or equivalent all as specified and directed.

Supply and Fix Vitreous China wash down water closet pan (pedestal pattern),Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device white (including fixing bolts, flushing cistern and flush pipe)connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed by Engineer-in-Charge

Dismantling PVC water tanks exc 500 & n exc 1000, and removing to store, etc complete all as specified and as directed.

Material and Labour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in 1000 ltrs capacity with 20mm HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply and Fix Rotational moulded polyethylene water storage tanks of capacity 500 Ltr (cylindrical vertical with closed top) with 20mm dia float valve , hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed

Supply and Fix vitreous china half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around back in cement discharge pipe etc complete all as specified and as directed.

Material and Labour for water proofing treatment with the following specifications complete all as specified and as per manufacturer’s instructions:- (i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement as leveling course (ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying APP membrane (STP Aquashield or equivalent) weighing 3to 4Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane. Note:- Water proofing compound shall be measured and paid separately)

Supply and Fix vitreous China wash hand basin of 590 X 450mm (Cat No.324RHINE of make Neycer or equivalent of Parryware/Hindustan), including 15mm dia swan neck fancy type chromium plated pillar tap (Cat No.G0203A1, Make - Parryware), CP waste coupling, chain and plug, waste fitting, union and waste pipe 32mm dia, brackets, PVC connection 450mm long with check nut, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed

Taking down carefully aluminium point wiring (light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed.

Material and Labour Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., all as specified and as directed for one light point controlled by one one way switch.

All as per item No. 157 here - in - before but for one fan point controlled by one 5 Amps switch with 1.5 sq mm copper conductor cable.

All as per item No. 157 here - in - before but for 5 Amps switch socket point on the same board controlled by one switch.

All as per item No 157 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings

Material and Labour Point wiring with 1.5 sqmm single core FRLS PVC insulated and unheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC conduit and all accessories fixed to walls/roofs/floors/ceiling etc and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor to common earth dolly, including fabricated steel terminal box made out of MS sheet concealed in wall, with 3mm thick laminated sheet top cover for housing the switches socket outlets, fan regulators etc. all as specified and as directed for One light/fan point controlled by one switch

All as per item No. 161 here - in - before but One 3 pin switch socket combination outlet point 5 amps on independent board complete all as specified and as directed.

Supply and fix switch piano flush button single pole one way 5 amp complete all as specified and as directed.

Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed.

Supply and fix ceiling rose surface Bakelite 65x50mm 3 terminal complete all as specified and as directed

Supply and fix fan speed regulator, electronic suitable socket type for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed. Make:-Anchor/Havells/Bajaj

Supply and fix switch socket outlet 3 & 2 pin (mult pin) 5 amps flush type, complete all as specified and as directed.

Supply and fixing energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core sheathed cable from fitting to ceiling rose incl taking down old unsv light fitting complete all as specified and as directed. Make: Philips Cat No BN021 LED 25S 4000 PSU GR S1 or eqvt in make of Bajaj/ Wipro/ Crompton.

Supply and fixing energy efficient LED Smart bright batten 10 watt fitting 2ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 25000 hours including lamp and connecting with twin core sheathed cable from fitting to ceiling rose all as specified and as directed. Make : Philips Cat No BN021C LED10S -6500 PSU GR S1 or eqvt in make of Bajaj/ Wipro/ Crompton.

Supply and Fix in repair sheet metal enclosures for DB SPN factory made duly painted 4 way and neutral 240 V with 200 amps rated bus bar, double door suitable for fixing MCB / Isolators all as specified.

Supply and Fix in repairs Single Pole and Neutral Enclosure with Two Pin Earth Plug and Socket complete with one MCB, SP, 20 Amps, 240 Volts all as specified and as directed.

Supply and fix MCB single pole 240 Volts 6 to 32 amps complete all as specified and as directed by Engineer-in-chage

Supply and fix MCB SPN, 240 Volts 6 to 32 amps complete all as specified and as directed by Engineer-in-charge

Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/ DB,Make : Havells /Legrand/C&S/L&T complete all as specified and as directed.

Supply and Fix New generation energy saving & environmental friendly long life versatile pressure 21 Watt fitting along with suitable dia GI pipe fitting , cast aluminium IP 65 road way luminaries with high power LEDs as light and electronic driver complete all as per Philips Cat No. BRP022 LED 21 CW MR S1 PSU GR or equivalent model of Wipro/Bajaj/Crompton with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6m long) nuts, bolts etc to be fixed as on walls complete as directed

Supply and fix ventilating fan suitable for on working of AC 230 V ,50 Hz 200 mm sweep, incl louvers complete all as specified Make: Havells Celso HSN code 8414/ Crompton/ Orient

Supply, lay, test and commissioning underground XLPE insulated and PVC sheathed, amoured heavy duty ground cable suitable for earthed system, laying in trenches / duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volts grade of cross section area 2 Core X 6sqm complete all as specified and as directed

Supply & lay cable protection pipe of Tele-Rex make -HDPE double wall corrugated (DWC) incl couplers, bends etc of size 50mm (Outer Dia) confirming to IS 14930 -II and ISI Marked all specified and directed.

Cutting the existing road/hard standing surfaces to a depth of 45 cm and 0.45 cm width and getting out for laying of GI Pipe for/returning filling with top 15 cm thick with PCC 1:3:6 type C1 using 20 mm graded stone aggregate and finishing even and fair without using extra cement including disposal of surplus soil all as directed

Taking down and refixing 4 feet Box type fitting including accessories and connecting the twin core cable to existing ceiling rose all specified & directed.

Dismantling and taking down ceiling fan 1200 mm sweep and refixing/connecting up including provision of cable from ceiling rose or connector to fan and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as directed

Material and Labour in repairs for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 4 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories, complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre.

Material and Labour for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

RPG AND COMPANY

T.THIYAGARAJAN

Ravi Enterprises

Priya construction

DEEPAK AGENCIES

AMR TRADERS

M/s Kamal Electrical

Hindustan Traders