SPECIAL REPAIR TO CAMERO GYMNASIUM AT SUBROTO PARK UNDER GE (AF) SUBROTO PARK, DELHI CANTT-10

Amount

BUILDING WORK : Dismantling of ceiling / wall panelling including frame work and board complete all as specified and directed.

Material and labour for false ceiling using GI snap grid system with roll-formed out of hot drip galvanised steel capings (powder coated) main runner 38x24mm, cross Tee 29 x 24mm and wall angle 24 x 24 mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg / Sqm with 4mm thick designer ceiling board, prepainted cement fibre board size 595mm x 595mm x 4mm thick any texture (Lake, Hill, ocean cascade or Electra ) suspended from RCC roof / structural members of soffits with angle cleat cut out etc to their required line and shape as per manufacturers recommendations at any height complete all as specified and as directed. Make: Everest ceiling and grid system Regular T-2430 or its equivalent Make.

Taking down cement plaster etc on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water, etc. and dispose off unserviceable materials to outside MOD land complete all as specified and directed.

M&L for rendering in CM (1:6) ,15 mm thick on other than fair faces of brick work or concrete surfaces etc. including finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 5 mm thick in CM (1:3) on concrete surfaces of ceiling, even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick surfaces or concrete surfaces even and smooth without using extra cement with using waterproofing compound complete all as specified and as directed. Note : WPC will be measured and paid in relevant item.

M&L for preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion on walls over a coat of primer including 3mm thick wall care putty on walls complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper white or tinted on wall complete all as directed and specified.

M&L preparation of new plastered or unplastered surface and applying three coats of white wash on ceiling complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

S & F colour coated galvalume aluminum zinc coating GI based corrugated/ style pattern steel sheet 0.50mm thick fixed to steel frame using L or J bolts with washer in roofs including crumping of corrugated galvalume sheet and having tensile strength of 550 Mpa and making good joint frame, complete all as specified and directed.

S & F plain, galvanised, MS sheeting of 0.63 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde E-250) quality - A ,complete all as specified and directed.

M&L for preparation of steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/ zinc chromate primer, complete all as specified and directed.

Taking out of APP modified water proofing membrane complete on roof surface and surface properly cleaned by wire brush complete all as specified and as directed.

M&L for preparation of plastered /concrete surfaces of roof and applying the under mentioned course of roof treatment complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be thoroughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyester non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE Film on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. (e) Including 10mm thick rendering with 1:4 using WPC. (f) Painting with two coats of water proofing paint with aluminium finish. (g) PCC 1:2:4 type B0 (using 12.5mm graded aggregate) roof kerbs, benching rounded or chamfered on edge including rounded or chamfered edges with necessary form work etc complete Note:- This treatment shall be done by the approved authorized applicators and guarantee of treatment shall be for 10 years.

M&L PCC 1:2:4 type B1 using 20mm graded aggregate mixed with water proofing compound as per manufacturer instructions laid as in padding over roof slabs for providing proper slope to the concrete padding, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L PCC 1:2:4 type B0 (using 12.5mm graded aggregate) in roof kerbs, benching rounded or chamfered on edge including rounded or chamfered edges with necessary form work etc complete all as specified and directed.

M&L 15mm thick screed bed in cement mortar (1:4) for laying of tiles complete all as specified and directed

M&L for cement concrete tiles 20cmX20cmX20mm thick with grey cement and no pigment, machine pressed; set jointed and pointed in neat cement slurry in floors and cut and polished completed all as specified and directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M& L 75 mm thick cement concrete type D-2 ,1:4:8 (40mm graded aggregate) as in sub base of floor including necessary formwork, complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M& L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006(latest revision), 80 mm thick, M-40 grade fixing with grey cement and no pigment complete all as specified and directed.

M&L for glossy finished chequered cement concrete coloured tiles (300mm X300mm) 20-25mm thick confirming to IS -1237 (rubber moulded) in floors etc, set, jointed & pointed with cement slurry 15mm thick bedding layer of cement sand mortar (1:6) complete all as specified.

S&F in repair 25 mm to 30 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 Sqm area and not exc 0.50 Sqm ,fixed with and including one number SS clamps (grade - 202) of flat 30mmx2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment including rendering of 10mm thick with CM 1:4 complete all as specified and directed.

M&L two coats of exterior apex paint (weather coat) including preparation of surfaces of new plastered surfaces of wall complete all as specified and directed.

M&L one coat of exterior apex paint (weather coat) including preparation of surfaces of previously plastered surfaces of wall complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350mmx 250mmx 7 mm / 450mmX 350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L Non skid ceramic coloured printed tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified.

M&L Vitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with coloured cement matching with surfaces of tiles as in floor 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) exceeding 1.50 Sqm but not exceeding 4.00 Sqm complete all as specified and directed.

All as per item 34 above but not exceeding 1.50 sqm complete all as specified and directed.

S & F rolled mild steel sections as in grills, cooler stand, chajja,water tank stand, gate, drain cover, guides for sliding doors fixed with angle cleat and other connecting plates conforming to Fe-290 grade E-165 including dismantling complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Dismantling stone slab and granite of any description or thickness in floors etc. laid ,bedded and pointed in any mortar and removing the debris outside the MOD land complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 15mm thick screed bed or bedding layer of Cement Mortar 1:4 complete all as specified and directed.

All as per item No 43 above but in skirting over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 20 mm thick granite stone (any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment (1:2) to match the shade of stone including cutting and polishing as in floors laid over 15mm thick screed bed in cement mortar 1:6 complete on cooking / working platform complete all as specified and directed..

Taking up or down steel water tubing 15 mm bore along with fittings connections including cleaning for reusing &refixing or removing to store complete all as specified and directed.

Taking up or down steel water tubing 20 mm bore along with fittings connections including cleaning for reusing & refixing or removing to store complete all as specified and directed.

S & F medium grade galvanised steel water tubing ISI marked with all fittings and fixed to walls and ceiling or laid in floors ,15 mm bore complete all as specified and directed..

S & F medium grade galvanised steel water tubing ISI marked with all fittings and fixed to walls and ceiling or laid in floors, 20 mm bore complete all as specified and directed..

S & F in repairs 15 mm bore bib taps, chromium plated and fancy type with crutch or butterfly handle,high pressure ,screwed down for pipes etc complete all as specified and directed.

S & F in repairs 15mm dia stop/angle valve but fancy type chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs 15mm dia stop/angle valve but fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs single lever basin mixer with popup waste system and 450 mm long braided hoses chromium plated of Make - ORM-10051 B of Jaquar or equivalent for pipes etc including CP wall flange of same make complete all as specified and directed.

S & F in repair for vitreous china urinal half stall type white complete all as specified and directed.

S & F in repair counter top oval wash basin, Size - 450 x 400 mm including waste coupling & PVC waste pipe complete all as specified and as directed.

S & F vitreous china squatting (Orissa pattern) water closet of size 580x440mm white, with integral foot rests ( excluding flushing cistern and flush pipe) complete including trap and connection to trap and flush pipe anti syphonage pipes including provision of lime concrete bedding and making good to floor fixed in repairs complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap etc complete all as specified and directed.

S & F in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs 10 litre capacity PVC low level flushing cistern complete with symphonic handle lever PVC bend including connecting to WC and fixed to walls with bracket duly painted complete all as specified and directed.

S & F in repair hand shower( health faucet ) with 1.0 m long easy flex tube in chrome finish and wall hook complete all as specified and directed.

S & F in repair 100 mm dia PTMT grating(minimum weight 25 grams) complete all as specified and directed .

S & F in repair 15mm dia PVC connection 450 mm long with nuts complete all as specified and directed

S & F in repairs chromium plated shower rose 125 mm size with or without swivel joints complete all as specified and directed.

S & F in repairs CP towel rail 450mm long fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F in repairs soap dish, chromium plated fixed to plugs with chromium plated brass screws etc complete all as specified and directed.

S & F of sheet glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repair 32mm brass chromium plated bottle traps for wash basins & urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repair CP toilet paper holder complete all as specified and directed.

Dismantling water tanks exc 250 litres but not exc 500 litres, and removing to store complete all as specified and as directed.

S & F rotational moulded polyethylene water tank 500 ltr capacity ,triple layer (cylindrical vertical with closed top) hoisted and fixed complete all as specified and as directed

S & F in repair 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Taking down rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F PVC (SWR) pipes 150 mm single socketed, in any length with solvent cement joints fixed to walls / laid in floors including stack clamps of stainless steel with bolts & nuts etc. complete all as specified and directed.

S & F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls / laid in floors including stack clamps of stainless steel with bolts & nuts etc. complete all as specified and directed.

S & F PVC (SWR) pipes 75 mm single socketed, in any length with solvent cement joints fixed to walls / laid in floors including stack clamps of stainless steel with bolts & nuts etc. complete all as specified and directed.

S & F in repair PVC (SWR) floor trap with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

S & F in repair PVC (SWR) bends any radius, 150 mm bore complete all as specified and directed.

S & F in repair PVC (SWR) bends any radius ,110 mm bore complete all as specified and directed.

S & F in repair PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.

S & F in repair PVC (SWR) junction piece 75 mm double (Double T) provided with access door equal or unequal complete all as specified and directed.

S & F in repair 110 mm PVC (SWR) junction single (Single T) provided with access door complete all as specified and directed.

S & F in repair PVC (SWR) vent cowl of size 110 mm complete all as specified and directed.

S & F in repair PVC (SWR) vent cowl of size 75 mm complete all as specified and directed.

M & L for clean sawn battens of hardwood 2nd class at 15 cm centres of sectional area exc. 5 sq.cm & n.exc 15 sq.cm complete all as specified and directed

M &L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth, for foundation or for manholes, sewer line etc. n.exc. 10 sq m on plan and n.exc. 1.5 m in depth and getting out hard/dense soil complete all as specified and directed.

M&L concrete bed 1:3:6 type C-2 to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested, bore of pipe 200mm complete all as specified and directed.

Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, internal dia / bore of pipe 300 mm including removing debries outside MOD land complete all as specified and directed.

M&L Reinforced concrete pipes, class NP2, laid and jointed complete with collars, bore of pipe 300mm complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete etc. complete all as specified and directed.

M&L cement concrete type B2 1:2:4 (40mm graded aggregate) as in haunching in manhole etc. complete all as specified and directed.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc. complete all as specified and directed.

M&L plastering 15mm thick on fair faces of brickwork or concrete surfaces cement mortar 1:4 etc. with using water proofing compound complete all as specified and directed.

S & F in repair factory made SFRC manhole/drain cover (Grade M-25), heavy duty cover slab in rectangular / circular/ squared shaped of size as required, 80 mm thick including MS sheet 2 mm thick and 80 mm wide all around the cover, set in cement mortar (1:4), complete all as specified and directed.

M&L mild steel TMT bars 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia etc. complete all as specified and directed.

M & L for cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required of 150 mm dia of pipe complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Removing excavated material exc 250m but n.exc 500m and depositing where directed complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

S & F solid PVC wall lining consisting of 5mm thick one side prelaminated coloured PVC sheet inclusive of solvent cement and PVC frame of 5mm thick PVC sheet fillet of width 35mm as per specifications and drawings, complete all as specified and directed.

INTERNAL ELECTRIFICATION : Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed

M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multi strand copper conductor of size 1.5 Sq mm FRLS (Nominal area) drawn through and including non metallic rigid PVC concealed conduit, medium grade, ISI marked not less than 20mm dia, concealed in wall, ceiling with GI saddles GI screws, rawl plugs (concealed conduit wiring) with all fittings including Tee, Junction boxes and provision of pressed steel terminal modular box powder coated of suitable size for mounting switch sockets and regulators and drawing continuous earth wire of PVC insulated unsheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed for following:. Note: Cost for cutting, chasing and making good to existing surfaces are deemed to be included in the quoted rate.

(a) For one light point controlled by one SP switch

(b) For one fan/exhaust fan and wall mounted fan point controlled by one SP switch.

(c) For one light point controlled by two 2 - way SP switches

All as per item No 102 above but for one 3 pin socket outlet, 6 Amps on same board with the cable 1.5 Sqmm size complete all as specified and directed .

All as per item No 102 above but for one 3 pin socket outlet, 6 Amps on Independent board with the cable 1.5 Sqmm size complete all as specified and directed .

All as per item No 102 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 1.5 Sq mm PVC insulated copper conductor unsheathed 1100 V grade IS -694 FRLS cable for continuous earth wire connected to gang box of required size complete all as specified and directed.

S & F switch piano, flush type single pole, one way, 6 Amps, 240 volts AC complete all as specified and directed.

S&F socket outlet flush type 5 pin 6 amps suitable for 240 volt AC complete all as specified and directed.

Supply and fix switch piano 5 Amps flush type single pole two way suitable for 240 volt AC complete all as specified and directed.

S&F switch piano 16 amps flush type single pole one way suitable for 240 volt AC complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC complete all as specified and directed.

Supply and fix electronic Fan Regulator rotary flush step type 120 watt, 240 volt complete all as specified and directed.

Supply and fixing of ceiling roses, surface bakelite 65x50mm 2 or 3 terminals , PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed.

S & F in replacement Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed.

M&L for taking down existing LED 4 feet long, wall mounted fittings carefully without damaging of any wattage and to be kept in safe custody untill completion of surface/wall finishing work and re-fixing the same after cleaning and connecting,testing complete all as specified as directed by Engr-in-Charge.

Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

M&L for taking down existing LED luminaire 600 mm x 600 mm fittings carefully without damaging of any wattage and to be kept in safe custody untill completion of ceiling surface work and re-fixing the same after cleaning and connecting,testing complete all as specified as directed by Engr-in-Charge.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for LED bulb complete all as specified and directed.

S & F LED bulb 9W complete all as specified and directed.

M&L for taking down existing street light fittings carefully without damaging of any wattage and to be kept in safe custody untill completion of finishing work and re-fixing the same after cleaning and connecting,testing complete all as specified as directed by Engr-in-Charge.

Supply and fixing in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L for taking down existing LED flood light fittings carefully without damaging of any wattage and to be kept in safe custody untill completion of ceiling surface work and re-fixing the same after cleaning and connecting,testing complete all as specified as directed by Engr-in-Charge.

Supply and fixing in replacement LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fixing in replacement post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Taking down including disconnecting the electric connection of ceiling fan and dismantling blades,greasing complete all as specified and directed

M&L for repairing of ceiling fan any size (including change of bearings/windings with super enamelled copper wire of same size ) replacement of suitable capacity of condenser and testing complete all as specified and directed.

Hanging / fixing only ceiling fan received from item No 126 above and connecting up including fastner and provision of suitable size of copper cable from connector of fans to ceiling rose complete all as specified and directed.

Taking down including disconnecting the electric connection of exhaust fan and dismantling blades,greasing and painting the whole assembly including marking MES No complete all as specified and directed

M&L for repairing of exhaust fan 450 mm sweep (including change of bearings/windings with super enamelled copper wire of same size ) replacement of suitable capacity of condenser and testing complete all as specified and directed.

Fixing only Exhaust fan received from item No. 129 above and connecting up including fastner and provision of suitable size of copper cable from connector of fans to ceiling rose complete all as specified and directed.

Taking down including disconnecting the electric connection of wall mounted fans and dismantling blades, greasing and painting the whole assembly including marking MES No complete all as specified and directed

M&L for repairing of wall mounted fan any size (including change of bearings/windings with super enamelled copper wire of same size ) replacement of suitable capacity of condenser and testing complete all as specified and directed.

Fixing only wall mounted fans received from item No 132 above and connecting up including fastner and provision of suitable size of copper cable from connector of fans to ceiling rose complete all as specified and directed.

M & L in replacement for submain wiring with two run of 6.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 6.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuity conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all accessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified and directed. - 2 Runs of 6.0 Sqmm single core and one run of 6.0 sqmm single core cable.

M & L in replacement for submain wiring with two run of 4.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 4.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuity conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all accessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified and directed. - 2 Runs of 6.0 Sqmm single core and one run of 4.0 sqmm single core cable.

Taking down unserviceable submain wiring of aluminium /copper two runs of any size cable including batten/conduit complete etc and making good disturbed bed surfaces complete all as specified and directed.

Taking down old unserviceable MCB DB TPN type of any size complete all as specified and directed.

Supply and fixing in replacement load line vertical distribution board 'A' frame made out of CRCA sheet,double door, surface mounting TPN 4 way 415 volts 125 Amps rated bus bar and stove enamels dust and vermin proof suitable for TP/FP 'A' frame MCCB of 40/63 Amps =01 No MCCB for outgoing complete all as specified and directed. Note :- MCB shall be measured and paid separately.

Supply and fix in replacement of fixed thermal and fixed magnetic settings, 4 pole MCCB 63 Amps, 50 HZ, 415 volts with rupturing capacity 16 KA complete all as specified and directed.

Taking down old unserviceable MCB DB SPN type of any size complete all as specified and directed.

Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 12 way 230 volts double door type regal grey horizontal type complete all as specified and as directed. Note :- MCB shall be measured and paid separately.

M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to and including galvanized iron strip 4 mm dia as earth lead by means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick mixture in equal ratio of magnesium sulphate & copper sulphate in all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plate NO 5 of SSR Part I (1991) and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all as specified Note :- PCC chamber shall be constructed at least one meter away from building shall be provided in slanting manner. Note :- PCC pit cover shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 Kg (sqm in lieu of CI)

M&L in replacement of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanized iron or steel wire complete all as specified and directed.

Taking down unserviceable SP MCBs of any capacities from the MCCB DBs /MCB DBs after disconnecting the electric supply complete all as specified and directed.

Refixing the SP MCBs received from above item no.145 complete all as specified and directed.

S&F in replacement MCB SP 5 to 32 Amps 10 KA, 240 volt 'B' Series all as specified and directed.

S&F MCB SP 40 Amps 10 KA, 240 volt 'B' Series all as specified and directed.

Taking down unserviceable SPN MCBs of any capacities from the MCCB DBs /MCB DBs after disconnecting the electric supply, complete all as specified and directed.

Refixing the SPN MCBs received from above item no. 149 complete all as specified and directed.

S&F in replacement MCB SPN 32 Amps 10 KA, 240 volt 50 HZ 'C' Series complete all as specified and directed.

Commercial Traders

Ashish Sehgal and Co.

Capital Construction Company

M/s. Kansal Construction Co.

Atish Builders LLP

PBS Construction Co

JYOTI ENTERPRISES