Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.2 LAccepted-AOC | L1 | Accepted-AOC Being overall reasonable rate | |
| 2 | L2₹36.3 L+₹6.1 L (20.2%)Rejected-Finance GATE NO 454 01 TAPKIR NAGAR PUNE NASIK HIGHWAY NEAR GANDHARV NAGARI MOSHI PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹37.3 L+₹7.1 L (23.6%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹45.0 L+₹14.9 L (49.2%)Rejected-Finance FLAT NO 601 TOWER NO 30 SECTOR NO 21 AMANORA PARK TOWN HADAPSAR PUNE 411028 | PUNE | MAHARASHTRA | 411028 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹45.7 L+₹15.5 L (51.5%)Rejected-Finance FLAT NO 203 SEC 14 PLOT NO 142 SHIVSRUTI PARK APARTMENT E WING 1ST FLOOR MOSHI PRADHIKARAN TAL HAVELI DIST PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
25 Jun 2024, 6:00 pmClosed
GE CENTRAL KHADKI
GE CENTRAL KHADKI RANGE HIILS ROAD KHADKI PUNE-411003
REPAIRS / MAINTENANCE / SERVICING OF PUMPS AND MOTORS, MOTOR STARTER CONTROL PANELS, VALVES OF VARIOUS INSTALLATIONS WITH MISC WORK UNDER AGE E/M-II IN GE (CENTRAL) KHADKI.
2024_MES_656397_1
8911/E8 OF 2024-2025
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
AGE E/M-II area
Class D Category a(ii)
7 documents required · 7 mandatory
₹500
GE CENTRAL KHADKI
₹96,000
Yes
5 Sept 2024
28 May 2024
29 Jun 2024
28 May 2024
25 Jun 2024
12 Jun 2024
28 May 2024 - 4 Jun 2024
Amount
Material and labour for disconnecting and taking down carefully Electric driven pumping set of capacity upto 15HP (motor and pump) from foundation, disconnecting suction and discharge water line for carrying out repair work of pump set, dismantling of pump set, cleaning, repair replacement of all unserviceable parts, reassembling complete pumping set, reinstalling , mounting and fixing on base channel on existing foundation and coupling properly to existing motor with proper balancing and alingment including recoupling of suction and discharge line, testing on full load for smooth functioning all as specified and as directed. NOTE :- (i) Rates including minor spares like gland, grease, nut bolts and major spares will be measured and paid separately and rate quoted shall be deemed to be included for fixing of new spares under these items. (ii) Contractor should visit site before quoting the rates. (iii) Cost of transportation shall be deemed to be included in the rate quoted for these items. (iv) While taking out pump for repairs , the contractor will make arrengement pluging suction and discharge line with dead flanges without extra cost, so that pumping of installation is not disturbed and there is no leakage of water. (v) The contractor shall repair and refix the pump set within three working days from the date of opening and making it functionable .
Description all as per item No. 1.00 but of capacity 30HP all as specified and directed.
Description all as per item No. 1.00 but of capacity 60HP all as specified and directed.
Description all as per item No. 1.00 but of capacity 75HP all as specified and directed.
Supply only following spare/parts of pump set for incorporate in the Item Ser No 1.00 to 4.00 above all as specified and as directed:-
Pressure gauge 0-30 PSI with 15mm valve & connector all as specified and directed.
MS shaft for pump of capacity 60 HP
Impeller MS/CI suitable for pump of capacity 60 HP
MS geard coupling with suitable size of key for pump of capacity 60 HP
Gasket set suitable suitable for pump of capacity 60 HP
Gland bush (shaft sleeves)suitable for pump of capacity 60 HP
Gland Plates suitable for pump of capacity 60 HP
Brass Distance bush suitable for pump of capacity 60 HP
MS shaft suitable for pump of capacity upto 15 HP
Impeller bush brass suitable for pump of capacity upto 15 HP
Impeller MS/CI suitable for pump of capacity upto 15 HP
coupling (As per sample) suitable for pump of capacity upto 15 HP
Gasket set suitable suitable for pump of capacity upto 15 HP
Gland plates MS (As per sample) suitable for pump of capacity upto 15 HP
Gland bush / Shaft sleeve (As per sample) suitable for pump of capacity upto 15 HP
MS shaft suitable for pump of capacity 30 HP
Impeller bush brass suitable for pump of capacity 30 HP
Impeller MS/CI suitable for pump of capacity 30 HP
coupling (As per sample) suitable for pump of capacity 30 HP
Gasket set suitable suitable for pump of capacity 30 HP
Gland plates MS (As per sample) suitable for pump of capacity 30 HP
Gland bush / Shaft sleeve (As per sample) suitable for pump of capacity 30 HP
MS shaft suitable for pump of capacity 75 HP
Impeller bush brass suitable for pump of capacity 75 HP
Brass Impeller suitable for pump of capacity 75 HP
Gasket set suitable suitable for pump of capacity 75 HP
Gland bush /Shaft sleeve (As per sample) suitable for pump of capacity 75 HP
MS Coupling suitable for pump of capacity 75 HP
Bearing No. NU-308/309/310/313 for electric motor & pump
Bearing No. 6313/6310/6314 for electric motor & pump
Bearing No. 3309 for electric motor & pump
Material and labour for disconnection/dismantling of electric motor 3 Phase, 415 Volt, from installation & transporting to workshop for rewinding , taking out old unserviceable burnt winding and rewinding the same with super enamelled copper wire of same guage/size to get the same output of motor including material such as varnish, sleeves, leothariod paper etc and refixing the same in position with proper alignment, balancing and testing of capacities 10/15 HP all as specified and directed.
Description all as per item No 6.00 above but of capacity 30 HP.
Description all as per item No 6.00 above but of capacity 60 HP.
Description all as per item No 6.00 above but of capacity 75 HP.
Material and labour for servicing of Motor Stater Control panle of motor capacity upto 75 HP with cleaning, checking all contactors, relays, control wiring and repair /replacment of unserviceable parts complete all as specified and as directed by Engr-in-Charge. NOTE :- (i) Cost of material like lugs, connectors, insulation tape is included in above cost. (ii) The quoted rate include the cost of painting of the panel with two coats of paints complete all as up to satisfection of Engr-in-charge. (iii) Cost of replacement of MCCB's, Contactors, relays, meters are not included in the quoted rate.
Supply & fixing of MCCB 63 Amps 25KA, 3 Pole with Adjustable thermal magnetic release with Supply and fix of suitable rotary handle,spreader links etc in the control panels complete all as directed.
Supply & fixing of MCCB 100 Amps 25KA, 3 Pole with Adjustable thermal magnetic release with Supply and fix of suitable rotary handle,spreader links etc in the control panels complete all as directed
Supply & fixing of MCCB 250 Amps 25KA, 3 Pole with Adjustable thermal magnetic release with Supply and fix of suitable rotary handle,spreader links etc in the control panels complete all as directed
Supply & fixing of MCCB 400 Amps 36KA, 3 Pole with Adjustable thermal magnetic release with Supply and fix of suitable rotary handle,spreader links etc in the control panels complete all as directed.
Supply & fixing of MCCB 630 Amps 36KA, 3 Pole with Adjustable thermal magnetic release with Supply and fix of suitable rotary handle,spreader links etc in the control panels complete all as directed.
Supply and fix PVC Insulated, copper conductor, single core, cable of size 50 Sqmm, laid in pvc pipe under PCC flooring/ alongwith wall etc including taking down old wire from stater to motor and connecting new cable all as specified and as directed.
Description all as per item No. 16.00 but of size 35 Sqm .
Description all as per item No. 16.00 but of size 16 Sqm.
Description all as per item No. 16.00 but of size 10 Sqm.
Supply and fix for Power contactor Amps, 3pole AC, coil voltage 240 V, 95 Amps, with 2 NO& 2NC contacts suitable for motor control stater all as specified and as directed.
Supply and fix for Power contactor Amps, 3pole AC, coil voltage 240 V, 50 Amps, with 1 NO& 1NC contacts suitable for motor control stater all as specified and as directed
Supply and fix for power contactor Amps, 3pole AC, coil voltage 240 V, 32 Amps, with 1 NO& 1NC contacts suitable for motor control stater all as specified and as directed.
Supply and fix Electronic Timer suitable for motor control stater, 3 phase, 415 V, 50 Hz, 3-30 Sec all as specified and as directed.
Supply and fix electronic motor protection relay, 240V, 32-88 Amsp all as specified and as directed.
Material and labour for replacement of coupling set of pumping set, with dismantling motor and pump from mounting, replacment of new coupling, refixing the same in position with proper alignment, balancing and testing for smooth functioning of capacity 10 to 30 HP all as specified and directed.
Description all as per item No 25 above but pump set capcity 60 to 75 HP.
Material and labour for attending complaint for Preventive maint/ normal repair/servicing of Pumps, motors, Stater control panels and misc complaints of water supply installation for smooth functioning of supply system under AGE E/M-II including necessary minor material like rubber packing,lead wool, gland packing, grease, cotton waste etc all as specified and as directed. NOTE :- i) Complaint will be notified to contractor on mobile phone at any time between 0800 hrs to 2200 hrs and will be rectified within 24 hours after notification, failing which Rs 500/- per day per complaint will be recovered ii) Contracor should informed regarding major breakdown and the repair work will be measured and paid respective items of Sch.
Material and labour for attending complaint for repair/replacment of rusted/broken pipe line, above ground level, removing leakage of water pipe lines of size 250 to 350 mm Bore pipe of any description such as CI/DI/GI pipe line at any location under AGE E/M-II including necessary cutting, jointing, welding work, dewatering, including repairs with suitable rubber packing,lead wool or any other packing material complete all as specified and as directed by Engr-in-Charge at site.
Description all as per Item No 28.00 above but of size 100 to 200mm bore.
Description all as per Item No 28.00 above but of size 40 to 80mm bore GI Pipe.
Material and labour for attending complaint for repair/replacment of rusted/broken pipe line, removing leakage of water pipe lines of size 250 to 350 mm Bore pipe of any description such as CI/DI pipe line at any location under AGE E/M-II including necessary excavation earth work, cutting, jointing, welding work, dewatering, including repairs with suitable flanges, rubber packing, lead wool or any other packing material complete all as specified and as directed.
Description all as per Item No 31.00 above but of size 100 to 200mm bore.
Description all as per Item No 31.00 above but of size 40 to 80mm bore GI Pipe. Note for item No. 28.00 to 33.00 :- i) Complaint will be notified to contractor on mobile phone at any time between 0800 hrs to 2200 hrs and will be rectified within 12 hours after notification, failing which Rs 500/- per day per complaint will be recovered ii) Cost for Excavation upto required depth, PCC demolition, earth work, PCC work if needed shall be mesured and paid under relavant items of schedule. Contractor should arrange JCB as per the direction of Engr-in-Charge at site. ii) Cost of Pipe, valves, GI Fittings and mechenical joints if needed shall be mesured and paid under relavant items of schedule.
Supply and laying tubes medium grade galvanised iron in trenches/wall /floor with all fittings such as tees, bends, unions, elbow, reducers, clamps, etc of size 50mm bore including taking down of existing old u/s pipe all as specified and as directed by Engr-in-Charge. NOTE :- Excavation, refilling, removing if required shall be carried out by the contractor and will be paid separately under respective item of sch.
Description all as per Item No 34.00 above but of size 40mm bore.
Description all as per Item No 34.00 above but of size 25mm bore.
Description all as per Item No-34.00 above but of size 20mm bore.
Description all as per Item No-34.00 above but of size 15mm bore.
Supply and fix of gun metal gate valve, cast copper alloy, screwed down, high pressure with iron wheel handle, screwed both ends for iron pipe or unions of size 50mm dia incl taking down old gate valve. NOTE :- (i) Cost included for any addition /alteration /adjustment of pipe for fitting of valve if required at site.
Description all as per Item No-39.00 above but of size 40mm bore.
Description all as per Item No-39.00 above but of size 25mm bore.
Description all as per Item No-39.00 above but of size 20mm bore.
Description all as per Item No-39.00 above but of size 15mm bore.
Supply and fix cast iron foot valve of size 200 mm dia with flanged end including rubber gaskets , nut bolts,and washers etc complete including taking out old unserviceable foot valve complete all as specified and as directed by Engr-in-Charge. NOTE :- (i) Cost included for any addition /alteration /adjustment of pipe for fitting of valve if required at site.
Description all as per item No 44.00 above but size 150mm dia.
Material and labour for replacement of mechanical joint coller coupling long sleeve with rubber washer, mild steel screw bolts (machine made) with both ends screwed of dia as per flange hole and required length each screwed end to be fitted with washers and hexagonal nut suitable for 100mm CI/DI/MS pipe complete all as directed. NOTE :- (i) Cost included for any addition / alteration / cutting / welding of pipe for fitting of joint if required at site.
Description all as per item No 46.00 above but of size 150mm bore.
Description all as per item No 46.00 above but of size 200mm bore.
Description all as per item No 46.00 above but of size 250mm bore.
Description all as per item No 46.00 above but of size 300mm bore.
Description all as per item No 46.00 above but of size 350mm bore.
Material and labour for repair of sluice valve of size 300/350mm dia with replacment of SS spindle, gland packing, nut& bolts, for removing leakage and greasing for smooth operation all as specified and as directed by Engr-in-Charge at site.
Material and labour for repair of sluice valve of size 200/250mm dia with replacment of SS spindle, gland packing, nut& bolts, for removing leakage and greasing for smooth operation all as specified and as directed by Engr-in-Charge at site.
Material and labour for repair of sluice valve of size 150mm dia with replacment of SS spindle, gland packing, nut& bolts, for removing leakage and greasing for smooth operation all as specified and as directed by Engr-in-Charge at site.
Material and labour for repair of sluice valve of size 100/80mm dia with replacment of SS spindle, gland packing, nut& bolts, for removing leakage and greasing for smooth operation all as specified and as directed by Engr-in-Charge at site.
Material and labour for laying MS ERW Pipes of 200 mm dia including all specials in any lengths & welding , cutting, bending etc complete laid in underground trenches/in duct/along wall/floor including taking down existing old u/s pipe all as specified and directed by Engr-in-Chage:-. NOTE :- Cost for Excavation upto required depth, PCC demolition, earth work, PCC work if needed shall be mesured and paid under relavant items of schedule. Contractor should arrange JCB as per the direction of Engr-in-Charge at site. MAKE :- Tata / Jinda l Swastik / Prakash / Surya / BST / Zenith
Description all as per item No 56 above but 150 mm dia
Description all as per item No 56 above but 100 mm dia
Description all as per item No 56 above but 80 mm dia
Supply and fix cast iron specials, bends and type, reducer and angle tapers, any stright bends double socket etc , Tee pipes single branch all socketed and spigot CI upto 350mm dia including dismantling of old one all as per site requirement and as per direction of Engr-in-Charge at site.
Material and labour for repair of existing iron suppot structure to pipe line, ducting cover of installation, made out of Mild Steel brackets, frames ,supports channel, MS plates and stands of any type as required made out of angle iron, channel, flat or strip of any size as per site requirement etc complete with painting two coat with synthetic enemel paint over a coat of red oxide all as specified and as directed by Engr-in-charge .
Material and labour for cement concrete work in foundation, filling, mass concrete by using 40 mm graded aggregate type B2 of ratio 1:2:4 for fixing MS channels for support CI/MS water pipes at any sloping area or as per the requirement at any location as directed by Engr-in- Charge.
Dismantling of stone sett paving laid bedded and pointed in cement mortar of any description or thickness / depth completed all as specified and directed by Engr-in-Charge.
Demolition of cement concrete in ground floors and paving any type n exc 15 cm thickness ( below or above ground level) all as specified and directed.
Material and labour for cement concrete 1:4:8 type D-2 (using 40 mm graded agg) as in sub base for stone sett paving complete all as specified and directed upto 100 mm thick, finished even and fair all as specified and directed.
Material and labour for stone sett flooring with stone setts of size 200 to 150 mm long ,150 to 200 mm wide and 150 mm deep and sides dressed, bedded in cement mortar 1:3 joints 20 mm thick ; grouted in cement mortar 1:2 complete all as specified and directed by Engr-in-Charge.
Description all as item no 66.00 above but except stone complete all as specified and directed by Engr-in-Charge.
Material and labour for flush pointing 20mm thich to stone sett paving any decription in cement mortar 1:3 with an admixture of metallic floor harder 5% by weight of cement completall as specified an directed .
Removal of debris (concrete, broken stone etc.) to location as directed (distance exceeding 1.5 KM but 5KM from the site ) and depositing where directed. NOTE :- Item Nos. 62 to 69 be executed only at locations where pipe line under stone setts flooring is repaired / replaced.
Material and labour for excavation in trenches not exceding 1.5 m wide not exceding 1.5 m in depth and getting out in soft / loose soil as directed by Engr-in-Charge at site.
Material and labour for returning filling in, including spreading, leveling watering well ramming in layer n.exc 1.5 cm thick in soft/loose soil.
Material and labour for removal of excavated material n.exc 50m & deposited where directed at a level not exc 1.5m above the starting point
Supply and laying of cast iron pipes flanged ends centrifugally cast, class B, in any trenches/ wall / pcc piller of size 200mm bore incl all nut, bolts, washer, rubber packing etc including dismantling / taking down old u/s pipes complete all as specified.
Description all as per item No 73 above but 150mm bore pipe.
Description all as per item No 73 above but 100mm bore pipe.
Description all as per item No 73 above but 80mm bore pipe.
ONKAR ELECTRIC AND GENERAL STORE
Star Electrical
UNIQUE ENGINEERS
SKS Electricals
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .