Renovation of Smart Park at Saheed Nagar Bhubaneswar

Removing old lime or cement plaster from walls including raking out joints 12 mm deep & removing the debris with in 50. m Lead. (per 1 Sqm.) (Data for 9.3 sqm.) including all cost of labour T&P etc, complete.

Dismantling brick or stone masonry in lime or cement mortar under 3. m height including stacking the useful materials for reuse and removing the debris with in 50. m Lead. (per 1 Cum.) (Data for 2.83 cum.) including all cost of labour T&P etc, complete.

Earth work in all kind of soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge (per 100 Cum.)

Fly ash Brick massonary work in C.M. (1:6) in Super structure using fly ash Brick having crushing strength not less than 125Kg./Cm2 including splays cutting circular,moulding watering curing for finished work including cost, conveyances, taxes, royality of all materials and labour with T&P required for the work as per the direction of the Engineer-in-charge.

Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.

Supplying, fitting & fixing of Kadpa Stone on 20mm thick cement mortar (1:4) (1. cement : 4 Course sand) of approved quality including cost of conveyance, taxes, cost of all labour T&P etc, complete. in all respect as per direction of Engineer-in-charge.

Supplying, fitting & fixing of MS grill made out of MS flat, angle etc including cost of conveyance, taxes, cost of all labour T&P etc, complete. in all respect as per direction of Engineer-in-charge.

Supplying, fitting and fixing of Chequered tile flooring on 20mm thick bed in C.M (1:4) and filling the joint with white cement incluidng cost of all materials and labour etc, complete.

Repair and refixing of Ms door shutter after necessary repair including cost of conveyance, taxes, cost of all labour T&P etc, complete. in all respect as per direction of Engineer-in-charge.

Providing & laying Granular Sub Base with Close Graded Grading-III materials as per table 400-1,spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC & compacting with VRR to achive desired density as per Clause 401of MoRT&H specifications for Road & Bridge Works (4th Revision).

Providing and laying of 80mm thick factory made cement concrete interlocking paver block of M35 grade of approved make design colour and size made by Block making machine with strong vibratory compaction of approved design and shape, laid in required colour and pattern over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete including cost, conveyance, royality, taxes of all materials, labour, T&P etc. complete as per direction of EIC.confirming to IRC-SP 63:2018

Cement concrete (1:2:4) using 12mm to 20mm size hard crusher broken granite stone chips of approved quality and from approved quarry including lowering, laying, compacting concrete with watering, curing including cost, conveyances, royalties & taxes of all materials with cost of all labour, T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge.

Scrapping, cleaning and providing two coats of weather coat painting with a coat of exterior primer over exterior surface including cost of all materials, labours and T&P etc complete.

Providing two coats of Synthetic Enamel paint with a coat of Red Oxide primer over wood or iron works including cost of all materials, labours and T&P etc complete.

Scrapping, cleaning and providing two coats of plastic emulsion painting with a coat of interior primer over interior surface including cost of all materials, labours and T&P etc complete.

Disposal of surplush debris away from worksite by mechanical measn including loading & unloading with cost of all labours and T&P etc complete.

Playing Equipments: Repairing, Painting & Maintenance of Wheel Chair MGR.

Painting of Monkey Bar

Painting of Wheel Chair Swing

Painting of Two-Seater Swing

Repairing, Painting & Maintenance of Bucket Swing

Painting of Single-Seater Spring Rider

Repairing, Painting & Maintenance of Musical Drums with replacement of 02 nos. of musical drum cover (10") with rod

Repairing, Painting & Maintenance of Musical Poles with replacement of 02 nos. of musical drum cover (14") with rod

Painting of Sand Play Table

Painting of Two-Seater Spring See-Saw

Painting of Musical Panel

Painting of Multi Swing

Painting of Fun Station

Painting of Double See-Saw

Painting of Multi Seater Merry-Go-Round

Painting of Ball Pool

Painting of Three-Seater Merry-Go-Round

Repairing, Painting & Welding Work of Shoulder Builder

Painting of Plain Slide

Repairing, Painting & Maintenance of Hanging Bridge

Painting of Hanging Dustbin

Repairing, Painting & Maintenance of Arch Swing with replacement of 02 nos. of swing chain with belt.

Repairing, Painting & Maintenance of Deluxe Sea Saw with replacement of 01 no. of complete balancing bar set.

Repairing, Painting & Maintenance of Deluxe Sea Saw with replacement of 02 nos. of seat.

Repairing, Painting & Maintenance of Air Walker with replacement of 02 nos. of complete leg set.

Painting of Push Up Bar

Repairing, Painting & Maintenance of Chest Press with replacement of 01 no. of 10"-6" shaft bearing, 20 nos. of 6004-bearing with bearing cap.

Repairing, Painting & Maintenance of Air Skier with replacement of 01 no. of complete leg set.

Repairing, Painting & Maintenance of Roto Wave Slide with replacement of 01 no. of Roto Slide chute.

Repairing, Painting & Maintenance of Roto Fun Station with replacement of 01 no. of Roto Slide chute with Ladder.

EI WORKS: Supply & fixing of 40Watt decorative post top fitting.

Supply and laying of 2x6mm2 Al.Ar. U.G cable.

Supply and laying of 3.5x25mm2 Al.Ar. U.G cable.

Supply and Laying of 40mm HDPE pipe for laying of Cable.

Cable trenching in all type of soil excepting rocky soil including excavation of earth, brick laying and filling of sand and loose earth to the original ground level with surface dressing after laying 1no 1.1 KVPVC insulated PVC sheathed armoured cable removal of surplus earth to a lead up to 5km.

Supply & fixing of SP MCB.

Providing and laying C.C (M-30) using 20mm size down graded crusher broken hard granite chips including the cost of centring and shuttering with cost of all labour, materials.T & P and taxes, royality etc complete in all respect as per the direction of Engineer-in-charge.

Supply and fixing of 150W Flood light.

S/F of Outdoor type double door plinth mounted panel board made out of 2mm thick CR sheet duly acid treated for de-rusting, primered and powder coated with approved enamel paint having hinged door with provision for cable entry duly factory wired and locking arrangement etc. complete with following provisions.

Supply and fixing of Standard earthing.

Supply and fixing of 10W Bulkhead Fitting.

PH Works: Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge(Supreme/Ashirvad/Oriplast) Ground Floor 25mm UPVC ASTM Pipe

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge G. Floor

1st Floor

2nd Floor

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. : 15mm dia long body Bib Cock cock (Jaquar)-CON-CHR-107KN

20mm dia CP concealed stop cock(Jaquar)CON-CHR-087KN

15mm dia CP angle stop cock (FLR-ACR-5053N)

15mm dia CP Pillar cock (Jaquar)CON-CHR-021KN

25mm dia brass or gun metal full way valve(shakti make)

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge Half pedestal Basin(Hindware)No.91049+91115

Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 1.50 three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm DOL Control panel