138WE/L-39/2020-21

Amount

Repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc. cutting around edges to at least 25mm in depth, making good by applying priming/tack coat with bituminous (Grade VG-10) @ 10 Kg per 10 Sqm and laying bituminous premix asphaltic semi-dense concrete 40 mm consolidated thickness with 5.5% binder (VG-30) content by weight of total mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tonne power roller, complete all as specified and directed. Note: Mixing to be carried out at Hot Mixing Plant and spreading by Mechanical paver.

Preparing existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and providing evenly a priming/tack coat with bituminous primer viscosity of bitumen grade VG-10 @ 5.0 Kg per 10 Sqm and laying bituminous premix asphaltic semi-dense concrete 40 mm consolidated thickness with 5.5% binder (VG-30) content by weight of total mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tonne power roller, complete all as specified and directed. Note: Mixing to be carried out at Hot Mixing Plant and spreading by Mechanical paver.

Material and Labour for painting lines, arrows, dashes, letter etc on road pavements and the like not exc 10 cm wide with hot melt thermoplast road marking paint white / yellow with glass beads complete all as specified and as directed .

Dismantling post struts of RCC any section including taking out embedded portion in cement concrete and making good disturbed ground by replacing new one all as per MORTH specications and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed .

Precast cement concrete 1:2:4, type B-1 post, boundary pillars, pier caps, bollards and similar articles set in cement mortar 1:6 complete all as specified and as directed .

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Preparation of new or previously untreated concrete surface of any description over 10 cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Preparation of old painted concrete surface of any description over 10 cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

JK Technical services

Path Associates

M/S MALIK CHAND SIRI RAM