REPAIR REPLACEMENT OF PIPE LINES VALVES AND CONNECTED ITEMS AT DOMESTIC AND TECH AREA AT AF STATION SURATGARH

Amount

BOQ (REPAIR / REPLACEMENT OF PIPE LINES, VALVES AND CONNECTED ITEMS AT DOMESTIC AND TECH AREA AT AF STATION SURATGARH)

Taking up CI/DI/GI water mains 80 mm dia from trenches (including all fittings), with spigot and socket ends and lead/tyton joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-in-Charge. Note : Earthwork to be measured and paid seperately

Taking up CI/DI/GI water mains 100 mm dia from trenches (including all fittings), with spigot and socket ends and lead/tyton joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-in-Charge. Note : Earthwork to be measured and paid seperately

Taking up CI/DI/GI water mains 150 mm dia from trenches (including all fittings), with spigot and socket ends and lead/tyton joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-in-Charge. Note : Earthwork to be measured and paid seperately

Taking up CI/DI/GI water mains 200 mm dia from trenches (including all fittings), with spigot and socket ends and lead/tyton joints including burning out joints and recovering lead, complete all as specified and directed by Engineer-in-Charge. Note : Earthwork to be measured and paid seperately

Taking up or down steel tubing of size 20 mm bore including all fittings and connections, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing of size 25 mm bore including all fittings and connections, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing of size 40/50 mm bore including all fittings and connections , complete all as specified and directed by Engineer-in-Charge. Note : Earthwork to be measured and paid seperately.

Dductile Iron pipes of 80 mm bore with Spigot and socketed ends, Class “K-9”, suitable for and including rubber tyton joints, complete all as specified and directed by Engineer-in-Charge. Make : ELECTRO STEEL / JINDAL SAW or equivalent.

Dductile Iron pipes of 100 mm bore with Spigot and socketed ends, Class “K-9”, suitable for and including rubber tyton joints, complete all as specified and directed by Engineer-in-Charge. Make : ELECTRO STEEL / JINDAL SAW or equivalent.

Dductile Iron pipes of 150 mm bore with Spigot and socketed ends, Class “K-9”, suitable for and including rubber tyton joints, complete all as specified and directed by Engineer-in-Charge. Make : ELECTRO STEEL / JINDAL SAW or equivalent.

Dductile Iron pipes of 200 mm bore with Spigot and socketed ends, Class “K-9”, suitable for and including rubber tyton joints, complete all as specified and directed by Engineer-in-Charge. Make : ELECTRO STEEL / JINDAL SAW or equivalent.

Galvanised Tube 20 mm bore, 'Medium grade', with all fitting including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line & fixed on walls or laid under floors, complete all as specified and directed by Engineer-in-Charge. Make : TATA/JINDAL/BST/OSWAL or equivalent.

Galvanised Tube 25 mm bore, 'Medium grade', with all fitting including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line & fixed on walls or laid under floors, complete all as specified and directed by Engineer-in-Charge. Make : TATA/JINDAL/BST/OSWAL or equivalent.

Galvanised Tube 40 mm bore, 'Medium grade', with all fitting including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line & fixed on walls or laid under floors, complete all as specified and directed by Engineer-in-Charge. Make : TATA/JINDAL/BST/OSWAL or equivalent.

Galvanised Tube 50 mm bore, 'Medium grade', with all fitting including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line & fixed on walls or laid under floors, complete all as specified and directed by Engineer-in-Charge. Make : TATA/JINDAL/BST/OSWAL or equivalent.

Galvanised Tube 80 mm bore, 'Medium grade', with all fitting including cutting, threading etc as per site requirement and drilling holes/fixing clamp set for taking branch connection from main pipe line & fixed on walls or laid under floors, complete all as specified and directed by Engineer-in-Charge. Make : TATA/JINDAL/BST/OSWAL or equivalent.

MS pipe (ERW steel) including cutting, bending and welding as per site reuirement and specials with flanged and drilled ends, jointing materials like nuts, botls and gasket etc of nominal dia 150 mm as per IS-3589 (1981) thickness 6.0 mm fixed in replacement of existing unservicable pipe complete all as directed by Engineer-in-Charge.

MS pipe (ERW steel) including cutting, bending and welding as per site reuirement and specials with flanged and drilled ends, jointing materials like nuts, botls and gasket etc of nominal dia 100 mm as per IS-3589 (1981) thickness 6.0 mm fixed in replacement of existing unservicable pipe complete all as directed by Engineer-in-Charge.

MS pipe (ERW steel) including cutting, bending and welding as per site reuirement and specials with flanged and drilled ends, jointing materials like nuts, botls and gasket etc of nominal dia 80 mm as per IS-3589 (1981) thickness 6.0 mm fixed in replacement of existing unservicable pipe complete all as directed by Engineer-in-Charge.

MS pipe (ERW steel) including cutting, bending and welding as per site reuirement and specials with flanged and drilled ends, jointing materials like nuts, botls and gasket etc of nominal dia 50 mm as per IS-3589 (1981) thickness 6.0 mm fixed in replacement of existing unservicable pipe complete all as directed by Engineer-in-Charge.

Excavation in trenches loose/soft soil not .exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for foundations, laying water mains, pipes, cables, etc getting out and formaing bottom surface to required gradient , complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested, complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point , complete all as specified and directed by Engineer-in-Charge.

Run lead joints for 150 mm bore cast iron spigot and socketed pipes and fittings by including jointing material i.e lead & spun yarn in repairs , complete all as specified and directed by Engineer-in-Charge.

Run lead joints for 100 mm bore cast iron spigot and socketed pipes and fittings by including jointing material i.e lead & spun yarn in repairs , complete all as specified and directed by Engineer-in-Charge.

Run lead joints for 80 mm bore cast iron spigot and socketed pipes and fittings by including jointing material i.e lead & spun yarn in repairs , complete all as specified and directed by Engineer-in-Charge.

Gun-metal gate valves with iron wheel head, screwed both ends size 20 mm bore, for iron pipe including taking down old unserviceable valve, complete all as specified and directed by Engineer-in-Charge. Make : ZOLTO/LEADER or equivalent.

Gun-metal gate valves with iron wheel head, screwed both ends size 25 mm bore, for iron pipe including taking down old unserviceable valve, complete all as specified and directed by Engineer-in-Charge. Make : ZOLTO/LEADER or equivalent.

Gun-metal gate valves with iron wheel head, screwed both ends size 40 mm bore, for iron pipe including taking down old unserviceable valve, complete all as specified and directed by Engineer-in-Charge. Make : ZOLTO/LEADER or equivalent.

Gun-metal gate valves with iron wheel head, screwed both ends size 50 mm bore, for iron pipe including taking down old unserviceable valve, complete all as specified and directed by Engineer-in-Charge. Make : ZOLTO/LEADER or equivalent.

Cast Iron/Ductile iron fittings for spigot and socket pipes up to 200 mm bore such as bends (any type, radius and angle) tapers, any type (straight bend increasing, decreasing or double socket etc) Tee pieces, single branch ‘Y’ junction double branch, cross collars caps and plug, and "D" joint , complete all as specified and directed by Engineer-in-Charge. Note: Earth work will be measured and paid seperately for fixing of "D" joint in unserviceable/broken line.

Cutting of road, hardstanding, cutting chases, pinning in and cutting chases for concealed water tubing exc 20cm but not exc 60cm in width and digging of excavation exc 40 cm but not exc 1.0 mtr depth in bituminious road / concrete surface / hardstanding and making good as existing surface by using hard core as required as sub base with and including top layer 100mm thick PCC 1:2:4 in concrete surface complete all as directed by Engineer-in-Charge.

Supply, fixing, testing and commissioing of submersible monoblock pump set three phase sync speed 3000 RPM 10 HP and making connection with suitable size of copper cable including taking down old unservicable monoblock pump set of any capacity complete all as directed by Engineer-in-Charge. Make : Kirloskar KOS 1030+ or equivalent.

Supply, fixing, testing and commissioing of submersible monoblock pump set three phase 6 stage 15 HP casing pipe size 150mm and making connection with suitable size of copper cable including taking down old unservicable monoblock pump set of any capacity complete all as directed by Engineer-in-Charge. Make : KSB pump type BPD 312 and motor type UMA 150E / Kirloskar or equivalent.

Supply, fixing, testing and commissioing of monoblock pump set 1 HP self priming 230 volts, 50 Hz and making connection with suitable size of copper cable including taking down old unservicable monoblock pump set of any capacity complete all as directed by Engineer-in-Charge. Make : Kirloskar model No SP0M*3PH or equivalent.

Air release valve with two air outlets confirming to IS 14845 of size 50 mm dia bore and fixing in DI/GI/CI water supply mains of size 50mm to 150mm dia with all fittings inclduing taking down old unserviceable air release valve of any capacity complete all as directed by Engineer-in-charge.

Supply, fixing, testing and commissioing of STAR DELTA STARTER, AC 3 phase, 415 volts, 50 Hz with sheet metel encloser with single phase preventer with wide band coil heavy duty suitable for 10 HP sebmersible pump and making connection with suitable size of copper cable including taking down old unservicable starter of any type and capacity complete all as directed by Engineer-in-Charge. Make : L&T TYPE MU-15 FASD HSN CODE 8536 CAT NO OF COIL VOLTAGE 360 VOLTAGE (220V-400V) CAT NO CS94091SOVO or equivalent.

Fixing only cast iron non return valve of size 150 mm bore, PN 1.6 (flanged) disc flap type with flanged and drilled ends with by pass arrangement conforming to IS-5312 : 1984 Part-1 including 02 Nos flanges and jointing material like nuts, botls, washers and gasket etc, in replacement of existing unserviciable valve complete all as specified. Note:- Cast iron non return valve of size 150mm bore shall be issue under Schedule 'B' store.

Fixing only cast iron non return valve of size 100 mm bore, PN 1.6 (flanged) disc flap type with flanged and drilled ends with by pass arrangement conforming to IS-5312 : 1984 Part-1 including 02 Nos flanges and jointing material like nuts, botls, washers and gasket etc, in replacement of existing unserviciable valve complete all as specified. Make : Note:- Cast iron non return valve of size 100mm bore shall be issue under Schedule 'B' store.

Fixing only cast iron non return valve of size 80 mm bore, PN 1.6 (flanged) disc flap type with flanged and drilled ends with by pass arrangement conforming to IS-5312 : 1984 Part-1 including 02 Nos flanges and jointing material like nuts, botls, washers and gasket etc, in replacement of existing unserviciable valve complete all as specified. Note:- Cast iron non return valve of size 80mm bore shall be issue under Schedule 'B' store.

Cast iron non return valve of size 50 mm bore, PN 1.6 (flanged) disc flap type with flanged and drilled ends with by pass arrangement conforming to IS-5312 : 1984 Part-1 including 02 Nos flanges and jointing material like nuts, botls, washers and gasket etc, in replacement of existing unserviciable valve complete all as specified. Make : Zoloto Art No 1083A HSN code : 84813000 / Kirloskar or equivalent.

Supply, fixing, testing and commissioing of submersible cable (flat cables) as per IS 694:1990 (standard insulation) of size 10 Sqmm three core including taking down old unservicable submersible cable of any capacity complete all as directed by Engineer-in-Charge. Make : L&T cat No WS00100PECM or equivalent.

Cast iron sluice valve of size 150 mm bore both end flanged, long body, class PN-1.6 conforming to IS 14846-2000 (ISI marked) with iron wheel and stainless steel spindle and fly nut, bolts, washers and rubber gasket etc, fixed in replacement of existing unserviceable sluice valve, complete all as specified and directed by Engineer-in-Charge. Make: Zoloto Art No 079B HSN code : 84818030 / Kirloskar.

Fixing only cast iron sluice valve of size 100 mm bore both end flanged, long body, class PN-1.6 conforming to IS 14846-2000 (ISI marked) with iron wheel and stainless steel spindle and fly nut, bolts, washers and rubber gasket etc, fixed in replacement of existing unserviceable sluice valve, complete all as specified and directed by Engineer-in-Charge. Note:- Cast iron sluice valve of size 100mm bore shall be issue under Schedule 'B' store.

Supply only cast iron sluice valve of size 80 mm bore both end flanged, long body, class PN-1.6 conforming to IS 14846-2000 (ISI marked) with iron wheel and stainless steel spindle and fly nut, bolts, washers and rubber gasket etc, fixed in replacement of existing unserviceable sluice valve, complete all as specified and directed by Engineer-in-Charge. Note:- Cast iron sluice valve of size 80mm bore shall be issue under Schedule 'B' store.

Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches , pillars etc & removing debries out of MoD land, complete all as specified and directed by the Engineer-in-Charge.

Brick work with sub class 'B' , straight or curved on plan not exc 6m mean raidus built in cement mortar 1:6 , complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) any description and laid in any position complete all as specified and directed.

Plain cement concrete, (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates as in foundation, filling and mass concrete complete all as specified and directed.

Plain cement concrete (1:3:6) type C-1, using 20mm graded stone aggregate as in coping, bands etc like incl weathering, slightly rounded or chamfered throating as directed incl form work (straight or curved) and finish all exposed surface facing of concrete , complete all as specified and directed by Engineer-in-Charge.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

Rolled mild steel joist, channel, angle, flat iron or Tee sections, fixed independently without connecting plates etc, confirming to Fe – 410 – W(Gde E - 250) quality 'B' complete all as specified and directed.

Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe – 410 – W (Gde E - 250) quality 'B' complete all as specified and directed.

Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 15 of tender documents.

SRI SAI CONSTRUCTION COMPANY

AJAY ELECTRIC COMPANY

DASHMESH ENTERPRISES

ROSHAN LAL AHUJA