Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.7 LAccepted-AOC KOHLI NO 17509 GALI KHADDAR BHANDAR WALI BHI WALA ROAD BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹43.7 L Quoted ₹43.9 L | L1 | Accepted-AOC BEING LOWEST BIDDER |
| 2 | L2₹44.2 L+₹33,599.20 (0.77%)Rejected-AOC | ₹44.2 L+₹33,599.20 (0.77%) | L2 | Rejected-AOC BEING OTHER THAN LOWEST BIDDER |
| 3 | L3₹47.3 L+₹3.4 L (7.72%)Rejected-AOC | ₹47.3 L+₹3.4 L (7.72%) | L3 | Rejected-AOC BEING OTHER THAN LOWEST BIDDER |
| 4 | L4₹48.4 L+₹4.5 L (10.3%)Rejected-AOC | ₹48.4 L+₹4.5 L (10.3%) | L4 | Rejected-AOC BEING OTHER THAN LOWEST BIDDER |
| 5 | Rejected-Technical KHASRA NO 716 POONIYON KI DHANI MEULASAR NAGAUR RAJ 341506 | NAGAUR | RAJASTHAN | 341506 | - | - | Rejected-Technical ADVERSE REMARKS MENTIONED IN HQ CE (A) GHANDINAGAR ZONE WLR QE DEC 2025 |
| Sl No | Description | Qty | Unit | PACHAR BROTHERS L3 | AK CONSTRUCTION L2 | M/s BHUPINDRA ENGINEERING WORKS L1 | BISHNOI BUILDERS L4 |
|---|---|---|---|---|---|---|---|
| .10Notes:- (i) 100 percent nonperishable items of the work shall be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) The unserviceable material obtained under the schedule of credit shall be handed over to the contractor by the Engineer-in-Charge on a proper gate pass. (v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill. (vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work. (viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder. (ix) If a bidder observes any item in the BOQ that appears to be "Freakishly Low" or technically not required for execution at the site, the bidder must submit written comments to the Accepting Officer during the pre-tender stage or at least 07 days before the Bid Submission Start Date. (x) Any act by the contractor that is found to be against the interest of the Department,or commits misconduct or any complaint received through proper channels and supported by verifiable proof (e.g., fraudulent vouchers, negligence in execution, or attempt to cause undue benefit), shall be treated as a willful default.Such defaults shall render the contractor liable for an Adverse Remark ("NO") in the Quarterly Work Load Return (WLR), barring the firm and its related/sister concerns from participating in further tenders. | |||||||
| 1.00 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge. | 86 | Each | 100 ₹8,600 Lowest | 150 ₹12,900 | 125 ₹10,750 | 200 ₹17,200 |
| 2.00 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge. | 85 | Each | 100 ₹8,500 Lowest | 100 ₹8,500 Lowest | 102 ₹8,670 | 200 ₹17,000 |
| 3.00 | Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each (includig fitting and fixtures) complete all as specified and as directed by Engineer-in-charge. | 40 | Per leaf | 100 ₹4,000 Lowest | 100 ₹4,000 Lowest | 100 ₹4,000 Lowest | 100 ₹4,000 Lowest |
| 4.00 | M&L for Taking down & Refixing of Shutter in same opening of any description exc 1 sqm nexc 2Sqm each complete all as specified and as directed by Engineer-in-charge. | 20 | Per Leaf | 100 ₹2,000 Lowest | 200 ₹4,000 | 400 ₹8,000 | 300 ₹6,000 |
| 5.00 | S& F in pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and PCC 1:3:6 type C0 using (12.5mm graded aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fasts plaster with painting etc including necessary formwork including applying two coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge. | 125 | RM | 450 ₹56,250 | 360 ₹45,000 Lowest | 382 ₹47,750 | 500 ₹62,500 |
| 6.00 | S&F in Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,PCC 1:3:6 type C0 using (12.5mm graded aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fastsand plaster with painting etc including necessary formwork including then applying two coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge. | 150 | RM | 450 ₹67,500 | 380 ₹57,000 Lowest | 380 ₹57,000 Lowest | 600 ₹90,000 |
| 7.00 | S & F Factory made single extruded WPC ( Wood polymer composite) Solid door/window or other frame /chowkets of size 45 mm x 70 mm compessing of virgin PVC polymer of k value 58-60 (suspension grade) calcium carbonate and natural fibre (eood powder /rice husk /wheet husk ) and non toxic additives (max. toxicity index of 12 for 100 grm ) fabricated with miter joint after applying pvc solvent cement and screwed with fully body threaded star headed ss screwed having min. frame dencity of 750 kg/cum screw withdrawal strenght of 2200 N(face) and 1100 N (edge) min. compessive strenght of 58 N/mm2 , modules of elasticity 900 n/mm2 and resistance to dpread of frame of class A cat. with property of being termite / borer proovf , water/ moisture proof and fire retardant and fixed in position with ms hold fast / lugs /ss dash fsterner of require dia and length complete all as per Engr in Charge.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile Shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Make :-Alstone/Century/Giza or technocommercial as listed in List of Makes here-in-after. | 290.4 | RM | 650 ₹1,88,760 Lowest | 670 ₹1,94,568 | 802 ₹2,32,900.8 | 800 ₹2,32,320 |
| 8.00 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge including supply and fixing of the following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.
(b) Stainless steel (304 Grade) finished square tower bolt 150 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.
(c) Stainless steel (304 Grade) Finished Handles 100 mm-2 Nos per leaf
Make :-Alstone/Century/Giza or technocommercial as listed in List of Makes here-in-after. | 79.95 | Sqm | 3,800 ₹3,03,810 Lowest | 4,700 ₹3,75,765 | 3,840 ₹3,07,008 | 4,500 ₹3,59,775 |
| 9.00 | S & F 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats and preparation of surafce and applying two coats of enamel paint over a coat of primer including supply and fixing following items in each leaf/shutter :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.
(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) Finished Floor door stopper 140 mm -1 Nos per leaf. | 120 | Sqm | 3,800 ₹4,56,000 | 2,000 ₹2,40,000 | 1,830 ₹2,19,600 Lowest | 1,900 ₹2,28,000 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
12 Jun 2026, 6:00 pmClosed
GE (A) SURATGARH
GE (A) SURATGARH,SURATGARH MIL STATION
REPAIR TO JOINERY AND WINDOWS IN OTM ACCN OF MECHANISED UNIT AND OTHER BUILDINGS UNDER GE (A) SURATGARH AT SURATGARH MIL STN
2026_MES_767345_1
GE(A)/SOG-TOKEN-07/2026-27
Open Tender
Civil Works
Item Rate
120 days
IN THE AOR OF GE (A) SURATGARH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(A) SURATGARH
₹88,000
Yes
14 Sept 2026
23 May 2026
15 Jun 2026
23 May 2026
12 Jun 2026
5 Jun 2026
23 May 2026 - 5 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge. | 86 | Each | - | - |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge. | 85 | Each | - | - |
| 3 | Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each (includig fitting and fixtures) complete all as specified and as directed by Engineer-in-charge. | 40 | Per leaf | - | - |
| 4 | M&L for Taking down & Refixing of Shutter in same opening of any description exc 1 sqm nexc 2Sqm each complete all as specified and as directed by Engineer-in-charge. | 20 | Per Leaf | - | - |
| 5 | S& F in pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and PCC 1:3:6 type C0 using (12.5mm graded aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fasts plaster with painting etc including necessary formwork including applying two coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge. | 125 | RM | - | - |
| 6 | S&F in Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,PCC 1:3:6 type C0 using (12.5mm graded aggregate) as in back filling of pressed steel frames, bed blocks, coping, fixing of hold fastsand plaster with painting etc including necessary formwork including then applying two coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girth complete all as specified and directed by Engineer - in - Charge. | 150 | RM | - | - |
| 7 | S & F Factory made single extruded WPC ( Wood polymer composite) Solid door/window or other frame /chowkets of size 45 mm x 70 mm compessing of virgin PVC polymer of k value 58-60 (suspension grade) calcium carbonate and natural fibre (eood powder /rice husk /wheet husk ) and non toxic additives (max. toxicity index of 12 for 100 grm ) fabricated with miter joint after applying pvc solvent cement and screwed with fully body threaded star headed ss screwed having min. frame dencity of 750 kg/cum screw withdrawal strenght of 2200 N(face) and 1100 N (edge) min. compessive strenght of 58 N/mm2 , modules of elasticity 900 n/mm2 and resistance to dpread of frame of class A cat. with property of being termite / borer proovf , water/ moisture proof and fire retardant and fixed in position with ms hold fast / lugs /ss dash fsterner of require dia and length complete all as per Engr in Charge.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile Shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Make :-Alstone/Century/Giza or technocommercial as listed in List of Makes here-in-after. | 290.4 | RM | - | - |
| 8 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge including supply and fixing of the following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.
(b) Stainless steel (304 Grade) finished square tower bolt 150 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.
(c) Stainless steel (304 Grade) Finished Handles 100 mm-2 Nos per leaf
Make :-Alstone/Century/Giza or technocommercial as listed in List of Makes here-in-after. | 79.95 | Sqm | - | - |
| 9 | S & F 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats and preparation of surafce and applying two coats of enamel paint over a coat of primer including supply and fixing following items in each leaf/shutter :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.
(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) Finished Floor door stopper 140 mm -1 Nos per leaf. | 120 | Sqm | - | - |
| 10 | S& F for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with both face is covered with Decorative laminate 0.9 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions and directed by engg in charge including supply and fixing following items :-
(a) Stainless steel (304 Grade) finished butt Hinges 100 mm, 4 Nos per leaf and table 6 of BIS 12817-2020 BIS Marked.
(b) Stainless steel (304 Grade) finished square tower bold 200 mm long-2 Nos per leaf as per table 01 dia of bolt 12 mm as per BIS 12833.
(c) Stainless steel (304 Grade) Finished Handles 200 mm-2 Nos per leaf.
(d) Stainless steel (304 Grade) finished sliding bold 300 mm-1 No per leaf, 16 mm dia as per BIS clause (iii) of BIS 15834-2020.
(e) Stainless steel (304 Grade) Finished Floor door stopper 140 mm -1 Nos per leaf. | 110 | Sqm | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
T07.pdf
Tender Documents • 1.36 MB
BOQ_859364.xls
BOQ • 0.38 MB
Cori1.pdf
PDF • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .