WBHOUSING/SE/RCFA/e-NIT-02(3RD CALL)/2025-26

Building Works Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches

Batch Mixed concrete of M 25 Grade with well Graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu. M of Wet concrete produced in computerised batching plant under controlled condition using approved super plasticizer designing concrete mix following I.S 10262 and I.S. 456 transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required level of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification and direction of the Engineer-in charge including hire charges of computerised batching plant, transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. Consumption of cement will not be less than 300 Kg of cement per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. [Cement to be supplied by Deptt, if Cement is supplied by agency then item rate to be deduced as per Format A of Annexure I] [with Batching Plant & transit mixer] In Ground Floor& Foundation. [Pakur Variety]

1st floor

2nd floor

3rd floor

4th floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Ground Floor

1st floor

2nd floor

3rd floor

4th floor

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement. (In Ground Floor)

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement. (In Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Brick work with 1st class modular bricks. With cement mortar (1:6)

200 mm. thick Brick work with Fly Ash Bricks set in cement sand mortar (1:6) including raking out joints, curing, scaffolding etc. complete in all respect. (a) In ground floor

1st floor

2nd floor

3rd floor

4th floor

In Water Tank Wall

100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4) including raking out joints, curing, scaffolding etc. complete in all respect.

1st floor

2nd floor

3rd floor

4th floor

Labour for Chipping of concrete surface before taking up Plastering work.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed. With 1:6 cement mortar/ 15 mm External Plaster, (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

With 1:4 cement mortar / 10 mm thick plaster. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks. 25 mm to 30 mm, without staging (Ground Floor)

25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. (Ground Floor)

1st floor

2nd floor

3rd floor

Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed. 35 mm. thick. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. (Gr. Floor)

1st floor

2nd floor

3rd floor

4th floor (Water Tank)

White washing including cleaning and smoothening surface thoroughly. Three coats (on new works only). Internal Plaster. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly. Two Coats. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

PVC Door Shutter-37 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. (Ground Floor).

1st floor

2nd floor

3rd floor

Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x50mm x 2mm (+/-0.2mm), (Gr. Floor)

1st floor

2nd floor

3rd floor

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in-charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.. 25 x 25 x 5 mm. (Gr. Floor)

1st floor

2nd floor

3rd floor

4th floor

Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. 35 mm thick shutters (single leaf). (Gr. Floor)

1st floor

2nd floor

3rd floor

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100mm. X 75mm. X 3.50mm. (Ground Floor)

Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 300mm long. (Gr. Floor)

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming. 200mm long x 10mm dia. bolt.

100mm long x 10mm dia. bolt.

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming. 75 x 63 x 3.2mm. (Gr. Floor)

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming. 100 mm grip x 10 mm dia rod.With contineous plate base.

Metallic magic eye of approved quality fitted and fixed complete. (Ground Floor)

Door stopper (Anodised aluminium)

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only](Ground Floor)

1st floor

2nd floor

3rd floor

M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars. (Ground Floor)

1st floor

2nd floor

3rd floor

Two point nose steel handle including fitting and fixing. (Ground Floor)

1st floor

2nd floor

3rd floor

steel peg stay 300 mm long including fitting and fixing. (Gr. Floor)

1st floor

2nd floor

3rd floor

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. Extra for work in grill gate.(I) For hanging and locking arrangements including supply of materials and labour complete. (Ground Floor)

1st floor

2nd floor

3rd floor

R.C. shelves (1:1.5:3) either precast or cast in situ with stone chips and necessary reinforcement upto 1% (0.8% main and 0.2% distribution bars), shuttering etc. and 10 mm. thick cement plaster (1:4) including neat cement finishing and cutting chase fitting and fixing in position, mending good damages as necessary complete. necessary reinforcement upto 1% . SAIL/ TATA/RINL 50 mm. Thick panels. (Gr. Floor)

1st floor

2nd floor

3rd floor

Supplying fitting and fixing door frame with M.S. angle as per drawing & direction of required section.The holes for counter sunk machine screw. Angle - 40 x 40 x 6. (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. (Gr. Floor)

4th floor

Priming one coat on timber or plastered surface with synthetic oil bound primer of --- etc. (Ground Floor)

1st floor

2nd floor

3rd floor

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening. (Gr. Floor)

1st floor

2nd floor

3rd floor

4th floor

Painting with best quality synthetic enamel paint of approved make and brand including --- etc. On timber or plastered surface : Two coats (with any shade except white). With super gloss (hi-gloss). (Ground Floor)

1st floor

2nd floor

3rd floor

On steel or other metal surface : With super gloss (hi-gloss). (Ground Floor)

1st floor

2nd floor

3rd floor

4th floor

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (Ground Floor)

1st floor

2nd floor

3rd floor

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes. 110 mm. Dia.

75 mm. Dia.

Plain Tee. 75 mm. Dia.

Bend 87.5 degree. 110 mm. Dia.

Shoe 110 mm. Dia.

Shoe 75 mm. Dia.

Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm. dia rod complete including mending damages. (Ground Floor)

1st floor

2nd floor

3rd floor

Pre-Constructional Anti-termite measures: Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical

Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate

Anti-termite treatment to the outside of foundations with chemical emulsion by admixing chloropyrofos emulsifiable

Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion

Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement

Extra rate for adding Polyester Fibre anti shrinkage material @ 0.25% by weight of cement [or as per Manufacturer's Specification]

25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm

Painting block letters or digits in Black Japan or any approved paint as per direction. Size above 10 cm. and upto 12.5 cm.

Size above 15 cm. and upto 20 cm.

Cutting holes and subsequent mending good damages. Diameter exceeding 150 mm. but not exceeding 300 mm. In brick work [Cement-6.0 Kg/Mtr]

S&P Works Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia.(v) For 100 users. With Pakur variety.(JSW/ JSPL)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm.(JSW/ JSPL)

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4). With Pakur variety. (JSW/ JSPL)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. 1500 litre capacity

Labour for hoisting plastic water storage tank. 1500 litre capacity

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Single Socketed 3 Meter Length. 110 mm

Double Socketed 1.8 Meter Length. 110 mm

Double Socketed 0.60 Meter Length. 110mm

Fittings. Double Y with Door. 110mm

110 X 110 P Trap. 75 mm

Door Bend (T.S.). 110 mm

Vent Cowl. 110 mm

Bend 87.5º. 110 mm

Door Tee. 110 mm

W.C. Connector (450 mm long) W / lipring. 75 mm

Solvent Cement 250 ML

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. Above ground. Single Socketed 3 Meter Length. 110mm.

Double socketed 1.8 Meter Length. 110mm.

Double socketed 0.60 Meter Length. 110mm.

Under ground. 110mm

Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth. 150 mm

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap. 580 mm X 440 mm

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position. 450 mm X 300 mm size.

630 mm X 450 mm size

Best quality sink in mosaic in silver grey colourwith C.P. waste and other fittings, rubber plug and chain, 600 mm X 450 mm X 250 mm

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling. 450 mm long.

600 mm long.

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling. 900 mm long.

Supplying, fitting and fixing pillar cock of approved make. PTMT Pillar Cock - 15 mm. (Prayag or equivalent).

Supplying, fitting and fixing Waste fittings complete. Polythene. 32 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785. For Exposed Work. 15mm.

40 mm Basin outlet. inlet pipe

Supplying, fitting & fixing Peets valve fullway GM std……..50mm dia

Supplying, fitting and fixing shower of approved brand and make. PTMT overhead shower ( Prayag or equivalent). 150 mm round. 150 mm round.

Supplying, fitting & fixing Aluminium domical grating. 125 mm

Supplying, fitting and fixing bib cock or stop cock. PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. 450 mm X 300 mm

600 mm X 450 mm

Supplying, fitting and fixing towel rail with two brackets. Aluminium. 25 mm dia. and 600 mm long.

Community Hall Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (Gr. Floor)

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed

Cement concrete with graded stone ballast (40 mm size excluding shuttering) [Pakur Variety] 1:3:6 proportion

Batch Mixed concrete of M 25 Grade with well Graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu. M of Wet concrete produced in computerised batching plant under controlled condition using approved super plasticizer designing concrete mix following I.S 10262 and I.S. 456 transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required level of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification and direction of the Engineer-in charge including hire charges of computerised batching plant, transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. Consumption of cement will not be less than 300 Kg of cement per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. Without approved conc. pump (In Ground Floor)

1st floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. JSW/JSPL/SHYAM (Ground Floor)

1st floor

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement. (In Ground Floor)

Brick work with 1st class modular bricks. With cement mortar (1:6) In foundation & Plinth

100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4) including raking out joints, curing, scaffolding etc. complete in all respect.

1st floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed. With 1:6 cement mortar/ 15 mm External Plaster, (Ground Floor)

1st floor

With 1:4 cement mortar / 10 mm thick plaster. (Ground Floor)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks. 25mm to 30mm without staging (Ground Floor)

Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work. (Ground Floor)

1st floor

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. Using grey cement, as directed. 35 mm. thick. (Ground Floor)

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. (Gr. Floor)

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly. Two Coats. (Ground Floor)

1st floor

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In Roof:- a) With 0.60 mm thick sheet

Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) 450mm lapping with 0.63 mm sheet

Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm M.S flat bar clamps bent to design, bolts, nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping)300mm wide gutter

G.I. Rain water spout 75 mm. Dia. And 600 to 750 mm. Long supplied fitted and fixed complete with two coats of paint to both exposed portion.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming.

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975. Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. (Ground Floor)

M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars. (Ground Floor)

Two point nose steel handle including fitting and fixing. (Ground Floor)

steel peg stay 300 mm long including fitting and fixing. (Gr. Floor)

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. Extra for work in grill gate.(I) For hanging and locking arrangements including supply of materials and labour complete. (Ground Floor)

Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) In ground floor.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening. (Gr. Floor)

Painting with best quality synthetic enamel paint of approved make and brand including --- etc.On steel or other metal surface : With super gloss (hi-gloss). (Ground Floor) (Ground Floor)

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (Ground Floor)

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes. 110 mm. Dia.

Bend 87.5 degree. 110 mm. Dia.

Shoe 110 mm. Dia.

Painting block letters or digits in Black Japan or any approved paint as per direction. Size above 15 cm. and upto 20 cm.

Cutting holes and subsequent mending good damages. Diameter exceeding 150 mm. but not exceeding 300 mm. In brick work [Cement-6.0 Kg/Mtr]

S&P works for Community Hall Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia.(v) For 100 users. With Pakur variety. (JSW/JSPL)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm.(JSW/JSPL)

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4). With Pakur variety(JSW/JSPL)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. 1500 litre capacity

Labour for hoisting plastic water storage tank. 1500 litre capacity

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth. 150 mm

Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth. 100 mm

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap. 580 mm X 440 mm

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position. 630 mm X 450 mm size.

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling. 450 mm long.

600 mm long.

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling. 900 mm long.

Supplying, fitting and fixing pillar cock of approved make. PTMT Pillar Cock - 15 mm. (Prayag or equivalent).

Supplying, fitting and fixing Waste fittings complete. Polythene. 32 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785. For Exposed Work. 15mm.

40 mm Basin outlet. inlet pipe

Supplying, fitting & fixing Peets valve fullway GM std……..50mm dia

40mm dia

20mm dia

Supply, Fitting & Fixing Shower of approved brand PTMT overhead shower (Prayag or equivalent) 150mm round

Supply, Fitting & Fixing Aluminium domical grating of 125mm

Supplying, fitting and fixing bib cock or stop cock. PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. 450 mm X 300 mm

Supplying, fitting and fixing towel rail with two brackets. Aluminium. 25 mm dia. and 600 mm long.

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks comp 470mmX280mmX340mm

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm

Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125 mm with(b) Porcelain of approved make.

Supply, Fitting & Fixing Urinal Flush Pipes. (a) C.P. urinal flush pipe fittings range of one

Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 600 mm X 100 mm

Market Complex Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed

Cement concrete with graded stone ballast (40 mm size excluding shuttering) [Pakur Variety] 1:3:6 proportion

Batch Mixed concrete of M 25 Grade with well Graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu. M of Wet concrete produced in computerised batching plant under controlled condition using approved super plasticizer designing concrete mix following I.S 10262 and I.S. 456 transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required level of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification and direction of the Engineer-in charge including hire charges of computerised batching plant, transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. Consumption of cement will not be less than 300 Kg of cement per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. Without approved conc. pump (In Ground Floor)

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (Ground Floor).JSW/JSPL/SHYAM (Ground Floor)

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Brick work with 1st class modular bricks. With cement mortar (1:6) In foundation and plinth

200 mm. thick Brick work with Fly Ash Bricks set in cement sand mortar (1:6) including raking out joints, curing, scaffolding etc. complete in all respect.

100 mm. thick brick work with Fly Ash Bricks set in cement sand mortar (1:4) including raking out joints, curing, scaffolding etc. complete in all respect.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed. With 1:6 cement mortar/ 15 mm External & Internal Plaster, (Ground Floor)

Single Brick Flat Soling 1st Quality Ceramic tiles in wall & Floors….. Complete. Floor with sand cement mortar 20mm. Area of tiles upto 0.09m2 color decorative (1:4)

Floor with sand cement mortar 15mm. Area of tiles upto 0.09m2 color decorative (1:3)

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks. 25mm to 30mm without staging (Ground Floor)

Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work. (Ground Floor)

Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) completes as per direction c) Soling or dry pavement with one brick-on-edge on a layer of brick flat (thicknass 125 mm. plus 75 mm.)

Flush pointing to brick work in cement mortar (1:4) including raking out joints

White washing including cleaning and smoothening surface thoroughly. Three coats (on new works only). Internal Plaster. (Ground Floor)

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly. Two Coats. (Ground Floor)

PVC Door Shutter-37 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. (Ground Floor).

Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x50mm x 2mm (+/-0.2mm), (Gr. Floor)

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr

M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. In ground floor.

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed. 35 mm. thick. (Ground Floor)

Supplying, fitting & fixing Steel Rolling shutter profile type with 18BG of approved type steel latch 75mm wide Complete as directed EIC

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening. (Gr. Floor)

Painting with best quality synthetic enamel paint of approved make and brand including --- etc. On steel or other metal surface : With super gloss (hi-gloss). (Ground Floor)

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes. 110 mm. Dia.

Plain Tee. 110 mm. Dia.

Bend 87.5 degree. 110 mm. Dia.

Shoe 110 mm. Dia.

Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia.(v) For 100 users. With Pakur variety. (JSW / JSPL)

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm. (JSW / JSPL)

Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4). With Pakur variety. (JSW / JSPL)

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Single Socketed 3 Meter Length. 110 mm

Double Socketed 1.20 Meter Length. 110mm

Double Socketed 0.60 Meter Length. 110mm

Double Socketed 0.90 Meter Length. 110mm

Vent Cowl. 110 mm

Bend 87.5º. 110 mm

Plain Tee. 110 mm

Door Tee ( L H & RH). 110 mm

Door Y ( L H & RH).110mm

Pipe Clip 110mm

WC Connector (450mm) W/ liping 75mm

Rubber lubricant 500ML

Solvent Cement 250 ML

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. Above ground. Single Socketed 3 Meter Length. 110mm.

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position. 630 mm X 450 mm size.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785. For Exposed Work. 15mm.

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). 25mm dia

20mm dia

15mm dia

Supplying, fitting and fixing shower of approved brand and make. PTMT overhead shower ( Prayag or equivalent). 150 mm round. 150 mm round.

Supplying, fitting and fixing bib cock or stop cock. PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. 450 mm X 300 mm

Supplying, fitting and fixing towel rail with two brackets. Aluminium. 25 mm dia. and 600 mm long.

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 470mmX280mmX340mm

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm

Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125 mm with b) Porcelain of approved make.

Supplying, fitting and fixing urinal flush pipe fittings of approved brand. (a) C.P. urinal flush pipe fittings range of one

Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 600 mm X 100 mm b) White vitreous chinaware

Electrical Works (BLDG) Supply & Fixing 1200 x 1000 mm Angle Iron frame made from 35 x 35 x 5 mm MS Angle and 35 x 5 mm MS Flat with 6 nos. 150 mm leg fixed on wall 75 mm above wall incl. S/F of 1200 x 1000 x 25 mm thick wooden Ply Board for fixing 8 nos. DPMCB & supply meter incl.all.fixing materials.

Supplying & fixing 415V 100/125A 4 bar copper sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)

Supplying & Fixing following Four pole MCB on existing wooden board. 400V 63A.

230V 32A, SPMCB

Supplying and fixing 2 way MCB SS enclosure with IP-20/30 protection, powder coated provision for two pole MCB on existing frame incl. connection & provision for earthing attachment (Make - Legrand / ABB/Schneider/Havells).

Supplying and fixing 240/415 V 32A DPMCB of Breaking capacity 10 KA & "C" characteristics on din rail of existing enclosure and necessary connection. (Make - Legrand / ABB/Schneider/Havells).

Supply & Laying 2x6 Sq.mm copper wire for meter loop (Make: Havells/ Finolex) .

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge 25 mm dia 3 mm thick polythene pipe without earth continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

Supplying and Drawing 1.1 KV 2x84/0.3 (6 Sq.mm) + 1x56/0.3 (4 Sq.mm) as ECC single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

Supplying and fixing 19 mm dia 3 mm thick polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction).

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F 19 mm dia 3 mm thick polythene pipe without earth continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

Supplying and Drawing 1.1 KV 3x22/0.3 (1.5 Sq.mm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required (Make: Havells/ Finolex).

Supply & Fixing 2x5A flash type plug socket with switch on 175 x 100 x 65 mm MS board & bakelite top cover complete with all accessories concealed in wall.

Distn. wiring by 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. (Avg. run 6 mtrs.)

Distn. wiring in 22/0.3 (1.5 sq. mm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. (On Board).

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65 mm MS (16 SWG) switch board and bakelite/perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 20 A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65 mm MS (16 SWG) switch board and bakelite/perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Distn. wiring with 2 x 36/0.3 (2.5 sqmm) single core stranded copper conductor PVC insulated and unsheathed copper wire (Brand approved by EIC) in 19 mm dia 3 mm thick polythene pipe with 1x22/0.3 (1.5 sq. mm) PVC insulated and unsheathed coper wire as ECC, complete with all accessories embedded in wall (For 15 A plug point).

Supplying & Fixing 100 mm x100 mm x 65 mm sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.

Supply & Fixing 100 mm x 100 mm bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required.

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing angular batten holder (Anchor) on 75 mm dia PVC round block / round bakelite on wall/ceiling.

Supplying and fixing double-door 2+6 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make - Legrand / ABB/Schneider/Havells).

Supplying and fixing 240/415 V 40 A DPMCB Isolator on din rail of existing DBs and necessary connection (Make - Legrand / ABB/Schneider/Havells).

Supplying and fixing 240/415 V 6-32A SPMCB of Breaking capacity 10 KA & "C" characteristics on din rail of existing DBs and necessary connection (Make - Legrand / ABB/Schneider/Havells).

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.

Excavation of soil for installation of Earth Electrode and filling & ramming in soft soil.

Earthing with 50 mm dia. GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia. x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia. GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI Medium GI pipe.

Equipment earthing by 10 SWG GI wire.

Supply & Fixing 15/16 W LED light fittings for stair case lighting (Make:Philips/Havells/Crompton)

COMMUNITY HALL ELECT................................... Supplying and fixing double door, 6 way Vertical TPN MCB Distribution box with 125 A Four pole MCCB as incomer and 6 nos. 63 A TP MCB as outgour with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link &provision for earthing attachment incl. S&F of 2 nos. cable end box (Make: ABB/Legrand/Schneider/Havells).

Supplying and fixing 415 V, (16-32) A per way, 4 way Horizontal TPN MCBDB with SS enclosure double door with IP-42/43 protection with 40 A Four Pole Isolator as incommer and 12nos. (6-32) A SPMCBs ("C" Curve, 10 KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment incl. S&F of 2 nos. cable end box (Make: ABB/Legrand/Schneider/Havells).

Supplying and fixing 240 V, (6-10) A per way, 2+8 way SPN MCBDB with SS enclosure double door with IP-42/43 protection with 32 A DP Isolator as incommer and (6-32) A 8 nos. SPMCBs ("C" Curve, 10 KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make: ABB/Legrand/Schneider/Havells).

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required (Make: Havells/Finolex) 4 x 80/0.4 (10 sqmm) + 2 x 84/0.3 (6 sqmm) as ECC. (VTPN to HTPN).

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) as ECC. (HTPN to SPNDB, AC).

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) as ECC. (For Power Plug).

3 x 22/0.3 (1.5 sqmm)

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 10 sq. mm copper wire

6 sq. mm copper wire

4 sq. mm copper wire

2.5 sq. mm copper wire

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. (Average run 6 mtrs.).

(Average run 8 mtrs.)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. On Board

Average run 4.5 mtrs.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S&F150x100x65 mm MS (16SWG) switch board and bakelite/ perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw after making housing for regulator knob by cutting bakelite/ perspex top cover incl. making necy. connections etc.

Fixing only 18/20 Watt single/twin LED luminaire suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125 mm x 125 mm) 6 mm thick and 25 mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991).

Supplying and fixing 415V, 125 A, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc. incl. S & F 3 nos. DIN type HRC fuse as per rating (Make: ABB/Havells).

Supplying and Laying of 1.1 KV Gr. 4 core 70 sq. mm XLPE/A Al. cable on wall/surface including S&F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting (Main switch to VTPN). (Make: Havells/Gloster/Polycab).

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 4 core 70 sq. mm XLPE/PVC armoured cables.

Finishing the end of 4 core 70 sq. mm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia. x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia. GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level. By TATA-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 8 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

MARKET COMPLEX ........................................... Supply & Fixing (1115 x 100 x 1150) mm of size made of 3/4" thick water proof & termite proof green ply duly painted on MS angle iron frame with 6 nos. leg made from 50x5 mm MS angle with 2 nos. supports of 25x5 mm MS flat duly grouted in wall incl. painting & mending good the damages for fixing of 26 nos. energy meter & DPMCBs (Make: ABB/Legrand/Schneider/Havells)., 4 bars 415 V, 125 A, Al. BBC, 100 A main switch (Make: Legrand/Schneider/Havells).etc. and whole structure is to be duly by GI coated BRC net guard.

Supplying and fixing 415 V, (16-32) A per way, 4 way HTPN MCBDB with SS enclosure double door with IP-42/43 protection with 40 A Four Pole Isolator as incommer and (6-32) A 12 Nos. SPMCBs ("C" Curve, 10 KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment incl. S&F of 2 nos. cable end box (Make: ABB/Legrand/Havells).

Supplying and fixing 240 V, (6-10) A per way, 2+6 way SPN MCBDB with SS enclosure double door with IP-42/43 protection with 32 A DP Isolator as incommer and (6-32) A 6 Nos. SPMCBs ("C" Curve, 10 KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make: ABB/Legrand/Havells).

Supply & Fixing (700 x 50 x 600) mm of size made of 3/4" thick water proof & termite proof green ply duly painted on MS angle iron frame with 2 nos. supports of 25x5 mm MS flat duly grouted in wall incl. painting & mending good the damages for fixing of 1 no. energy meter etc. and whole structure is to be duly by GI coated BRC net guarded.

Supplying and fixing 240 V, (6-10) A per way, 2+4 way SPN MCBDB with SS enclosure double door with IP-42/43 protection with 32 A DP Isolator as incommer and (6-32) A SPMCBs ("C" Curve, 10 KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make: ABB/Legrand/Schneider/Havells).

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. (Make: Havells/Finolex) 2 x 56/0.3 (4 sq. mm) + 1 x 36/0.3 (2.5 sq. mm) as ECC. (HTPN to SPNDB)

2 x 36/0.3 (2.5 sq. mm) + 1 x 22/0.3 (1.5 sq. mm) as ECC. (For Power Plug).

3 x 22/0.3 (1.5 sq. mm)

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 4 sq. mm copper wire

2.5 sq. mm copper wire

1.5 sq. mm copper wire

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. (Average run 6 mtrs.).

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish. On Board

Average run 4.5 mtrs.

Supply & Fixing 240 V, 20 A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S&F150x100x65 mm MS (16 SWG) switch board and bakelite/ perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. (2 Nos. for each shop)

Supply & Fixing 240 V, 6 A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S&F150x100x65 mm MS (16SWG) switch board and bakelite/ perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (2 Nos. for each shop)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw after making housing for regulator knob by cutting bakelite/ perspex top cover incl. making necy. connections etc.

Fixing only 18/20 W single LED light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener.

Supply & Fixing exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection incl. Supply & Fixing of GI louver shutter on wall with necy. bolts & nuts (6 mm dia. x 62 mm long) of following sizes : 230 mm (9"), 1370 r.p.m. (Make: EPC)

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991).

Supplying and fixing 415V, 63 A TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts, bolts etc. incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make: ABB/Havells).

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia. x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia. GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level. By TATA-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size No. 8 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Sub Total

Please Enable Macros to View BoQ information