Renovation work of Sub Division and Jiledar Office situated at Mungrabadshahpur in District Jaunpur under Sharda Sahayak Khand-39,Prayagraj. Lot 04

Amount

Dismantling existing plaster including disposal of refuse as directed by Engineer-in- charge with in a distance of 60 m. As per direction of Engineer in charge.

Dismantling door or window including chaukhat with hold fast including stacking of materials as directed by Engineer-in-charge with in a distance of 60 m.

Plastering 1:4 C.M cement and yamuna coarse sand (F.M. More than 2.0 ) including cost of all materials,labour,T&P etc required for proper completion of work. As per direction of Engineer in charge.

Finishing wall with two coat of water proof cement paint of premium quality such as super snowcem,Durocem,supercem of required shade on new wall saurfaceover one coat of white cement primer to give an even shade after including curing and cost of all material. As per direction of Engineer in charge.

Providing and fixing vitrified tiles 600x600 mm, 9mm thick(dark) shade Somany/ Kajaria/Jonhson/Orient make fixing with 1:3 C.M. including cost of all materials , labour and T&P etc. complete as per direction of Engineer- in- charge.

Earth work in foundation in ordinary soil for boundary pillar with lead up to 30 mtr. And lift up to 1.50 mtr.As per direction of Engineer- in- charge.

E/W of cutting ,filling & levelling including all labour,material etc complete.As per direction of Engineer- in- charge.

Brick Work M-150 grade in 1:4 CM with cement and coarse sand (F.M more than 2.0) including cost of all materials, labour , T & P, etc, required for proper completion of work. as per direction of Engineer- in- charge.

Centering Shuttering for RCC work in boundary wall beam & column. As per direction of Engineer- in- charge.

Cutting, bending, binding and placing in position of reinforcement in boundary wall including cost of all labour ,binding wire reinforcement steel and T&P etc. complete. As per direction of Engineer in charge.

Mixing & Laying R.C.C. 1:1.5:3 with cement ,coarse sand and stone ballast 10 to 20mm in beam,column,slab etc. including cost of all material,labour and T&P etc. complete. As per direction of Engineer in charge.

Mixing & Laying P.C.C.1:3:6 with cement ,coarse sand and stone ballast 10 to 20 mm in boundary wall including cost of all material,labour, T&P etc. complete . As per direction of Engineer in charge.

Supplying and laying 80mm thick I - shaped Mechanically compresses inter locking cement concrete paver blocks over 15cm thick compacted granular sub base material manufactured by high pressure & controlled vibration machine having plan dimension 200 × (160+120mm) with minimum 5mm thick topping of D.P. cement mixed with 25% marble powder. The compressive strength of concrete paver block shall not be less than 30 MPa & kg/no including cost of all material labour T&P required for proper completion of work.As per direction of Engineer in charge.

Dismantling of G.C. Steel roofing / wall partition including stacking within 100M. As per direction of Engineer in charge.

Supplying and fixing of Door including painting as directed by Engineer in chargeDoor D-1 (1.20x2.10M).

Supplying and fixing of Door including painting as directed by Engineer in charge. Door D-2 (0.75x2.10 M).

Supplying and fixing of Door and windows including painting as directed by Engineer in charge. Window W-1 (1.35x1.50 M)

Supplying and fixing of windows including painting as directed by Engineer in charge Window W-2 (1.00x1.35 M).

Supplying and fixing of Ventilator including painting as directed by Engineer in chargeVentilator size (0.30x0.60 M) .

Supply and fixing of galvanized corrugated iron rofing 24 B.W.C.Including cutting and punching with cost of washer,rivet,bolt and nut ,labour .T&P etc.required for proper completion of work but excluding cost of trusses flat iron etc. As per direction of Engineer in charge.

Providing and Fixing Indian type white glazed earthen ware 1st quality lSI marked W/C pan size 580 mm Indian make of approved quality including cost of all materials. As per direction of Engineer in charge.

Providing and Fixing European type white glazed earthen ware 1st quality lSI marked W/C pan bakelite sheet cover and lid with C.P. Brass sand including cost of all materials,

Providing and Fixing 10 Its. Low revel P.V.C cistern of standard approved make complete with all accessories and fittings. As per direction of Engineer in charge.

Providing and fixing white vitreous chine flate back urinol size 500X380X350 mm with slip , pvc flushing cistern on M.S. Braced with C.P. Brass fitting flush pipe including cost of all material . As per direction of Engineer in charge.

Providing and fixing mirror of size 600x450 mm including cost of all material, labor T&P etc, As per direction of Engineer in charge.

Providing and fixing brass towel rail 750X20 mm including cost of all material, labor T&P etc,

Providing and fixing wash hand basin 550x400 mm size vetrious china including cutting hole & complete in all respect.

Proving and fixing stainless steel kitchen sink 410x200x80 mm with all fittings. As per direction of Engineer in charge.

Providing and fixing PVC over head tank 0.5KL Tank capacity in any approved brand such as sintex including all cost of material and manpower. As per direction of Engineer in charge.

Providing and fixing G.I Pipe 25 mm dia pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete including cost of material.

Providing and fixing G.I Pipe 15 mm dia pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete including cost of material. As per direction of Engineer in charge.

Providing and fixing G.I.Tee 25 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing G.I. Elbow 25 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing G.I.Socket 25 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing G.I. Reducing Tee 25X25X15 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing G.I. Cross Tee 25 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing G.I.Tee 15 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing G.I. Elbow 15 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing G.I.Socket 15 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing G.I. Cross Tee 15 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing Brass ferrule 15 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing 15 mm dia angle cock ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing nahani trap with jali including cost of all material. As per direction of Engineer in charge.

Providing and fixing C.I. bib cock with brass rod 15 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing Stop cock 25 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing Stop cock 15 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing G.I. nipple 50 mm long 15 mm dia ISI marked including cost of all material. As per direction of Engineer in charge.

Providing and fixing C.P. brass Shower with ISI mark including cost of all material. As per direction of Engineer in charge.

Providing and fixing PVC pipe for drain and septic tank and W.C. including cost of all material. As per direction of Engineer in charge.

Wiring point for light with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire in side the conduit and piano type switch itc. Complete in all respect. As per direction of Engineer in charge.

Wiring point for fan with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire in side the conduit and piano type switch itc. Complete in all respect . As per direction of Engineer in charge.

Wiring point for Plug with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire in side the conduit and piano type switch & socket itc. Complete in all respect (complete rate) . As per direction of Engineer in charge.

Wiring point for power Plug/H-P.M.V./Sodium vapour lamp with 2.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire in side the conduit and piano type switch itc. Complete in all respect . As per direction of Engineer in charge.

Supply and fixing of 32 Amp. 240 V metal Clad Rewirable type switch fuse unit on M.D.F.E.G teak wood frame complete in all respect complete in all respect. As per direction of Engineer in charge.

Supply and Fixing factory wired H.P.F cut off type street light lantern complete with moulded arcylic cover internal control gear , 250 W H.P.MV-lamp and G.I pipe bracket etc. complete in all respect. As per direction of Engineer in charge.

Supply and laying of Aluminum conductor PVC insulated amoured sheathed cable 1100 volts, in open and along the ground, grout with MS clamps of suitable size as directed by Enginner - in - Charge, complete in all respect, Armouring. (10 sq mm cable laying in open . As per direction of Engineer in charge.

Supply and laying of Aluminum conductor PVC insulated amoured sheathed cable 1100 volts, in open and along the ground, grout with MS clamps of suitable size as directed by Enginner - in - Charge, complete in all respect, Armouring. (6 sq mm cable laying in open ,along the ground) . As per direction of Engineer in charge.

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as per direction of Engineer in charge.

Supply and fixing of factory wired H.P.F. box type fluorescent tube light fitting suitable for 1×40 watt fluorescent tube complete including tubes etc. on surface, complete in all respect of Philips/Bajal/G.E.C. or Crompton make. As per direction of Engineer in charge.

Fabrication and fixing of mild steel iron work in gate, including cutting driling welding reweting and fixing hinges where necessary with fixing in position including cost of all material labour T&P etc required for proper completion of work with one coat of red oxide primer. As per direction of Engineer in charge.

Providing and fixing in position angle iron section including cutting ,drilling etc. including cost of all material, labour and T&P etc. required for proper completion of work. As per direction of Engineer in charge.

Providing and fixing stretching G.I barbed wire per R.M of 12 gauge X 12 gauge in proper position in post including cost of labour , materials T&Prequired for proper completion of work. As per direction of Engineer in charge.

SHAILESH YADAV (BID ID -4716042)