Erection of 3.3KV OH line for marching of electrical shovel at 6 no departmental patch under AADOCM.

Amount

Dismantling of pole/street light slandard/strut embedded in cement concrete foundation etc. as required.

Erection of steel pole tubular or rail pole strut concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 40 mm nominal size) foundation including excavation and re-filling and secured with holding clamps, bolts, nuts, etc. as required.

Dismantling of overhead lines for tightening of OH line conmprising of aluminium overhead conductor, G.l. wire cross arms, insulators etc. as required

Erection of all aluminiunn conductor of 7/1.96mm to 7/3.10 diameter and above including binding etc. as required. 12 span*503*.394

Supplying and erection of galvanized stay set for 11KV overhead lines complete with 19/2Omm dia x 1.8 metres long stav rod, anchor plate of size 45cmx 45cm x 7.5mm thick, thimble, stay clanps. turn buckle (20inm x 600nm), 7/4.00mm dia G.I. stay wire and 11KV strain insulator etc. in cement conrele 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.

Supplying and erection of 11KV disc insulator for 11KV overhead lines with galvanized insulator fittings, ball and socket tvoe and comolete with galvanized strain clamps, bolts, nuts, washers ett. as required

Supplying and erection of 11KV pin insulator complete with large steel head G.l. pin, nuts washers etc. as required.

Supplying and erection of a set of crOSs bracing FRLS same work for 33KV overhead line double pole structure having four members fabricated out of 65mm x 65mm x 6mm angle iron to form a rectangle of m1nimum size 2400mm width x 2800mm height complete with 50mm x 6mm jM.S. flat iron clamps, bclts and nuts inciuding drilling holes for insulator pins, bolts, nuts, washerS eic. and painting with primer and finish paint as required.

Supplying of channel iron 75mm x 4jmm x Gmm (7.14 kg per metre) V shape cross arm for two 11KV overhead line conductors complete with 50rmm x 6mm M.S. flat iron clamps, bolts and nuts inciuding driling holes for insuialor pins, bolts, nuls and washers etc. (as per drawing) and painting with prinier and finish paint as required (+) Erection of pole top/straight two wire/V shape two wire, angle iron/channel iron, cross arm on steel tubular/rail/PCC pole for 11/22/33 KV as required.

Supplyirg of chatifhel iron 75 mm x 40 mm x 6 mm (7.14 ke per metre) cross arn for 4 wire over head line cormplete with ciamps, bolts, nuts and washer etc including drilling of holes for insulaiur pins etc (as per drawing) and painting with prirmer and finished paint as required (+) Erection of angle it on/ channel iror cross arm on wood/RCC/PCC/ steel tubular/ rail pole etc. as required

Transportiig of pole fro transport to site

Erection of pole top/straight two wire/V-shape two wire, angle iron/channel iron, cross arm on steel tubular/rail/PCC pole for 11/22/33 KV as required (+) Supplying of two lengths of channel iron 75mn x 40mn x Gmm (7.14kg per netre) double pole cross arIn for three wire 11KV overtiead line conductors cornplete with through bolts and nuts for clamping of the poles, 50m x Gnm fuS. flats welded on one side to the channel iron and with bolts and nuts on the other side for 1ying the cross arrns together, including drilling holes for insulator pins/fittings, bolt:, ruts arid Washers elc. (as per drawirng) and painting with priier and finish paint as required.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 11 KV grade of followitie size direct in graund including excavation, sand cushiouig, protective covering and re-fillng the treuch etc. as requied Upto 120 sq. mm

Total impact of GST for the purpose of CTC