Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹6.6 L+₹1.6 L (32.5%)Rejected-Finance 1000 PUDA MODEL TOWN PHASE 5 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹20,600
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHISIANA
GE (AF) BHISIANA PIN-151201
AS PER BOQ/PRICE SCHEDULE
2022_MES_532886_1
GE/BHI/T-46/2022-23
Open Tender
Civil Works
Item Rate
273 days
GE (AF) BHISIANA
AS PER NIT/TENDER DOCUMENT
6 documents required · 6 mandatory
₹500
GE (AF) BHISIANA
₹20,600
Yes
12 Aug 2022
22 Jun 2022
28 Jul 2022
22 Jun 2022
26 Jul 2022
9 Jul 2022
28 Jun 2022 - 5 Jul 2022
Amount
Taking down cement plaster on brick or stone masonry Including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge.
M&L for 15 mm thick Cement plaster in CM (1:4) on fair faces of brick work or concrete surfaces including applying two coat of cement base paint over and a coat of primer after preparation of new plastered surfaces.
M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc including applying two coats oil bound distemper (OBD) over a coat of primer and after preparation of plastered surfaces complete all as specified and directed.
M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc including applying three coats white wash and after preparation of plastered surfaces complete all as specified and directed.
M&L for 5 mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces in ceiling and finishing the surface even and smooth (without using extra cement) etc including applying three coats of white wash and after preparation of plastered surfaces complete all as specified and directed.
M&L Applying a coat of white wash over and after preparation of existing old decorated plastered/unplastered surfaces of walls, pillars, cornices by brooming down etc, all as specified and as directed.
All as per srl item No-6 here-in-before but on ceiling.
M&L Applying a coat of oil bound distemper over and after preparation of old decorated plastered/unplastered surfaces of walls, pillars cornices etc, all as specified and as directed.
M&l Applying a coat of cement base paint over and after preparation of old decorated plastered/unplastered surfaces of walls, pillars, cornices by brooming down etc all as specified as directed.
M&L Applying a coat of synthetic enamel paint over old painted wooden surfaces of any description having width/girth exceeding 10cm, all as specified as directed.
Applying a coat of synthetic enamel paint over old painted steel/iron surfaces of any description having width/girth exceeding 10 cm complete.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removal of debries from MD land complete.
M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and as directed.
M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base to paving complete all as specified and as directed.
M&L for coloured chequred cement concrete tiles 30cm x 30 cm x 25 mm thick, including 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match with grey cement and pigment complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified and as directed by the Engr-in-Charge.
M&L for sand cushning 25mm thick for interlocking tiles complete all as specified and as directed by the Engr-in-Charge.
M&L for refixing of machine pressed precast concrete interlocking paver block any shape and size s of 60mm thickness M-35 Grade with grey cement and pigment except tiles complete all as specified and as directed by the Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified.
M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc. including 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match copmplete.
M&L for Glazed ceramic coloured tiles in vertical surface 350x250x7 mm / 450x300x7mm thick including 10mm thick cement plaster in CM 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match complete.
M&L for machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing ccomplete all as specified.
M&L for machine cut kota stone 20-25mm thick in riser of steps, skirting, dado and pillar etc including 10mm thick cement plaster in CM 1:3 set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified abd directed.
Taking down Chowkhats or frames with shutter not exc 1.5 Sqm Each (without taking off shutters from the frames).
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing .
S&F Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg.
M&L for Shutters of any description exc 1 Sqm, but not exc 2 Sqm each taking down and refix in same opening after easing and cutting in required length and width with necessary screwing and naling if required all as specified and as directed.
Taking down chowkats and shutters without taking off shutters from the frame, size of opening exc. 1.50 Sqm but not exc 4 Sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1 Sqm but nexc 2 Sqm each complete all as specified and as directed.
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed of size 105 X 60mm.
M&L for PCC (1:3:6) type C-1 using 20 mm graded agg as in back of pressed steel chowkhats etc complete all as specified and directed.
S&F 2nd class hard wood (Hollock) 35mm thick plain framed, factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete.
S&F glazed and skelton shutter 2nd class hard wood 35mm thick,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and including glazing 3 mm thick and fixing wire cloth complete.
S&F Butt hinges 100mm size extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of 150mm long extruded section and fixed complete all as specified and directed.
S&F 200 mm Mild steel Sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
S&F 150mm Aluminium handles, cast type anodised.
M&L applying Two coats of Synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth.
M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc. including 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match copmplete. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 Sqm in each pane complete.
S&F figured glass 4mm thick , pin head type and glazing with oil putty in square not exc. 0.5 Sqm in each pane complete.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.
S&F as in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.
M&L for repairs to steel rolling shutter of any size without ball bearing as specified including top cover anchoring rod hasp and stapple and making in serviceable condition including replacement of the unserviceable parts refixing in same opening and making good in CM 1:3 to match the existing complete all as specified and as directed.
M&L for 15 mm dia tubes medium grade galvanised with all fitting and fixed to walls and ceilings or laid in floors etc complete all as specified.
M&L for 20 mm dia tubes, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Dismantling water tanks exc 250 ltr and nexc 500 ltr and removing to store complete all as specified and directed.
S&F for Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.
S&F Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repairs Gun metal gate valves 20mm dia with iron wheel head screwed both ends for iron pipe complete.
S&F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
S&F as in repairs 100 mm bore Traps 'P' or 'S' complete all as specified and diredted.
S&F in repair Vitreous china squatting pan , 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests complete including provision of lime concrete bedding complete.
S&F in repair china wash down water closet padestal pattern white excluding flush and fix to position, including seat cover and connection to drain etc all as specified as directed.
S&F in repair Flush pipe of Polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete.
S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm fixed on existing brackets or stands incl 32mm PVC waste pipe complete all as specified and as directed.
S&F 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and flu-nuts screwed for iron pipe as fixed in repairs.
S&F 15 mm bore Stop/ Angle Valve chromium plated with long shank and cup (concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed in repairs complete.
M&L for Coloured ceramic tiles/Rectfied tiles 7 to 8 mm thick (Square/ recangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm on vertical surface as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:3 to receive vertical tiles complete all as specified. NOTE : Cost of Rendering shall deem to be include in the Quoted Unit Rate.
S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete.
S&F in repairs Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete.
S&F in repairs 15mm dia Bib taps, Chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete.
S&F in repairs chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union complete.
S&F 75mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) but as in repairs complete.
S&F in repairs MS curtain rod 20mm dia PVC coated with fixing brackets and ends cap (latoo) complete all as specified and directed.
M&L for Removing of bushes upto 10 cm dia trunk, grass from roof top, racking out joints/pointing to brick tiles laid flat and flush pointing with 1:3 cement mortar compound, all as specified as directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including clamps, nut bolts including dismantling of old AC rain water pipe etc..
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.
Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in foundation, filling and mass concrete etc complete all as specified and as directed.
M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in coping complete all as specified and as directed.
Supply and fixing in repairs box type steel windows/ ventilators glazed & gauged factory made with side hung shutters including box type hinges with steel handle and steel peg stay, and necessary grills and guard bars of 10mm squre bars with spacing not exc 125mm c/c including applying Two coat of synthetic Enamel Paint over a coat of red oxide complete and making good the disturbed portion with PCC or Plaster and painting the surface to match with the existing surface complete all as specified and as directed.
Demolition of brick or stone boulder masnory, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facing, dressed stonework and percast concrete articles complete.
M&L for Brick work with subclass B bricks, staright or curved on plan exc 6.00 mtr mean redius, biult in cement mortar (1:6) complete all as specified and as directed.
All as per item No 77 above but except brick complete all as specified and as directed.
Demolition of reinforcement cement concrete of any description and in any position as in manhole or drain slab (reinforcement cut as required to facilitate demolition) and removal of debries from MD land complete.
Taking up or down Steel Tubing 15mm bore (dia) and Connections, complete all as specified and as directed.
M&L for providing precast cement concrete as in manholes cover or drain cover slab type B1 (1:2:4) 20mm graded aggregate set in CM (1:4) complete all as specified and as directed.
M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape, required, including cranking, bending spirallly for hoopin for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and as directed.
All as per item No 82 above but Round bar 10mm dia and over complete all as specified and as directed.
Taking up or down Steel Tubing 20mm bore (dia) and Connections, complete all as specified and as directed.
Dismantling Structural Steel or Mild Steel Work of any description not otherwise provided for, complete all as specified and as directed.
S&F Rolled mild steel in Rolled section as in main and cross beams, hip and jack rafter : purlins where connected to common rafter and running rails and guides for sliding doors : fixed with angle cleats or other connecting plate complete all as specified and directed.
Dismantling plain or corrugated steel/fibre sheeting of any gauge or thickness including nanital or similar pattern roof covering complete all as specified and as directed.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
Dismantling Wall and Ceiling Boards of any descriptions, complete all as specified and as directed.
M&L for Non asbestos Fibre cement Boards 600x600x4mm thick fixed in ceiling Aluminium Frame work with screws all as specified and directed
S&F aluminium anodised Grid Frame Work of size 605x605mm as in False Ceiling including 4mm dia GI wire for hangers where ever required, complete all as specified and as directed.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .