8605/E8

Amount

Schedule 'A'

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed.

M&L for Cement concrete, (1:4:8) type D2 (using 40mm graded stone aggregate)as in foundations complete all as specified and directed.

Returning,filling in including spreading ,leveling ,waterring and well ramming in layers not exc 25cm with soft/loose soil complete all as specified and directed.

Removing excavated material/soil n .exc. 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

Dismantling of structural steel work of any description complete all as specified and directed.

S&F Framed wk as in doors or gates and or other sections with gusset plates rails brces etc complete drilled for fixing of steel seating or otgher covering doors, doors etc to be prepared for hanging etc complete of grade FE 410 complete all as specified and directed.

M&L for two coat of synthetic enamel painting over a coat of red oxide primer to newly steel surfaces exc 10 cm width or girth complete all as specified and directed.

S&F MS wheel (Fe 2062) of size 100mm dia and 10mm thick including necessary cutting of surclip groove, bearing groove and boost groove including necessary hardening, nurling, fixing only roller bearings and other fittings like ball bearings etc complete all as specified and directed.

Surface exvcavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for 100 mm thick cement concrete type C2 1:3:6 using (40mm graded stone aggregate) as in floor finishes even to receive floor tiles with cobing complete all as specified and directed. (Source of Sand :- Dimapur)

M&L for 20mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:4 complete all as specified and directed.

M&L for chequered cement concrete tiles of size 300mmx300mmx25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and as directed.

M&L for Brick work with subclass 'B' brick straight or curved on plan 6m mean radius built in CM (1:6) etc complete all as specified and as directed.

M&L for Rendering 15mm thick Cement plaster with (1:4)cement mortar to other than fair faces of brick wall and finished ,even & Smooth without using extra cement complete all as specified and as directed.

M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping including necessary formwork complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) 75mm thick as in sub base complete all as specified and as directed..

M & L for Machine pressed precast concrete coloured interlocking vibro compacted rubber moulded interlocking paver coloured block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with pigment over complete all as specified and directed.

M&L for sand cushioning Fine aggrigate for concrete complete all as specified and directed.

M&L for plain cement concrete type B1 1:2:4 ( using 20 mm graded stone aggregate) as in footing of post etc incl necessary form work , weathering, slightly rounded or charmfered angle posts and throating complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F shaft 50mm dia, length 50mm & MS bush with ball bearing of dia 50mm type ZZ for top wheel of sliding gate complete all as specified and as directed.

M& L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M/S PRADEEP CONSTRUCTION (BID ID -3073222)

M/s CYBER DEN (BID ID -3076066)

L BINOD CONSTRUCTION CO (BID ID -3075005)

M/S BIJOYA LAXMI ENTERPRISE (BID ID -3077243)

M/S MANGANG RENOVATIONS (BID ID -3076840)

MAURYA CONSTRUCTIONS (BID ID -3075939)

M/S Apple constructions (BID ID -3084581)