Providing new cement concrete road in vellalur cross street 15 vellalur cross street 16 and manhole arrangements at vellalur cross street 17 in ward 57

Amount

Removing the Existing Paver block M40 grade 80mm thick & 60mm thick in the the rate including Removing and Stock to the Same Site and tranporting loading unloading and Labour Charges and Other tools etc. complete as per standard specification,.

Providing and laying,spreading and compacting 0.396m3of45-22.40mm&0.528m3of22.40-2.36mm&0.396m3 of 2.36mm and below metal graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying inuniform layers with paver in subbase/basecourse onwell prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Plain Cement Concrete 1:1.5:3 (one cement, one and half fine aggregates and three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification

Charges towards finishing the concrete surface with power traveler machine rate shall include the cost of fule charges hire for manchine and labour charges for operation etc.,,

Raising the existing Circular manholes in heavy type including removing the existing manhole cover with frame by dismantling the exisiting Cement Concrete and tar road surface alround the manhole raising the manhole with Cement concrete 1:2:4 (one cement two sand and four aggregates) 25cm height including centering insid the manhole raising, laying 15cm thick cement concrete 1:2:4 with 20mm granite chips including finishing the top surface of manhole Alround etc. complete.

Manufacturing, Supply & Fixing of Retro - Reflective Road Name sign board Single arrow size 1.0x0.5m Size Made out if wide angle cuble corner micro primatic grade sheeting confirming to IRC 67:2010 & Type XI Standards of ASTM D 4956-09 Specification and Fixed over 2mm thick aluminiu sheet back support frame of staineless steel supported by 32NB Stainless steel Pipe all around and 65NB pipe vertical post firmly fixed to the ground by means of property designed foundation with M15 grade cement concrete 30cm x 30xm x 45c mets complete. The information message shall be made out of cut out letters in Blue color transparent overlay film as per IRC 67-201 Guidelines, 7 years pre qualification warrenty for Retro Reflective sheeting from the orginal sheeting manufactuer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro-Reflective typ XI. The Retro-Reflective sheeting should have manufactures WATER MARK on the sheeting surface for idetification and the reflective sheeting should be orientation free this should be compulsonly be demonstrable Single Arrow Big Size 36" X 18"

Construction of manholes using sulphate resistant cement at various depths to invert including earth work excavation as per SS20B, laying cement concrete in C.M.1:3:6 using 40mmB.G. jelly for foundation, sinking well kerb belowG.L. for 4.5mdepth and above, pumping, timbering charges for 2.5mdepth and above,stockbrickworkinC.M.1:3, for23cmthick wall and over 23cm thick wall,plastering interior with C.M.1:3, 20mm thick and exterior with C.M.1:3, 12mm thick, layingplaincementconcrete1:3:6using12.0mm to 20mm B.G. jelly fixing the frame, providing C.I. steps,manhole cover and frame etc.complete for the following sizes for each manhole(As per the type design drawing for manholes). 900 x 1200 mm upto 900 mm

Add GST 18%

PARIS CONSTRUCTION