WBPWDAECSD/NIET14CSD/25-26/02

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. All floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor) (Ground floor)c) 15 mm thick plaster (External) 6:1 cement morter

(1st floor)c) 15 mm thick plaster 6:1 cement morter

Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping 25 mm

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

(b) On steel or other metal surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification

1st floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer b) Premium 100% Acrylic Emulsion

1st floor

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wa

Renewing worn out putty of glass panes :) Panes not exceeding 0.2 Sq.m

Renewing teak wood beads of glass panes (each pane not exceeding 0.2 Sq.m

Cleaning and removing paint mark from glass pane with spirit and removing strains

Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge.

Venetian shutters of doors and windows as per design with valves fixed to valve and rod with plated hooks including cost of plated hooks and 35mm thick shutters with 12mm thick panel Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length 110mm

(B) Fittings 110 mm (ii) Plain Tee 110mm

x) Bend 87.5º 110mm

xii)Door Bend (LH) & (RH)

xvi) Pipe Clip 110mm

Rubber Lubricant 500 ml

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. (A) Above Ground (ii) 110 mm dia.

Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately Small plant of girth of exposed stem upto 75 mm. lift upto 6 mtr