Construction of bituminous road for connecting existing Factory area to newly developed Pinaka Pod Production area near Admin Block along with storm water drain inside factory O. F. Bhusawal.

Amount

Construction of bituminous road for connecting existing Factory area to newly developed Pinaka Pod Production area near Admin Block along with storm water drain inside factory O. F. Bhusawal.

7.5 cm thick (compacted thickness) WBM with coarse aggregates of grading 2 (63 to 40mm size) spread, rolled and consolidated to gradient and camber required, type of aggregate Granite, trap or Basalt.

7.5 cm thick (compacted thickness) WBM |with coarse aggregates of grading 3(50 to 20mm size), spread, rolled and consolidated to gradient and camber required, type of aggregate Granite, trap or Basalt.

Preparing surfaces by brushing with wire brushes For BBM of removing caked, mud, etc. sweping with brooms and finaly fanning the cleaned surface with gunny bags to remove all loose dirt, etc. on unsurfaced water bound macadam surface.

Surface dressing by spraying evenly paving bitumen at 20 kg per 10 Sq.M, blinding with 12.5 mm stone chipping @0.14 Cu.M per 10 |Sq.M and rolling to required gradient and camber, M & L.

Coarse aggregates, grading 3, 50 to 20mm size, type of aggregate granite, trap or basalt.

Preparing black top surfaces by brushing with wire brushes for removing caked, mud, etc. sweping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt, etc. on black top surface.

M &Lapplying evenly a Tack coat with paving bituminous primer at 10 kg per 10 Sq.M.

Premix paving bituminous, macadam |laid/rolled and compacted to required gradient and camber (consolidated thickness less than 75mm). Binder content Paving bitumen any penetration.

Bituminous premix asphaltic dense concrete l25mm consolidated thickness with 5.5% aving bitumen binder content by weight of total mix, rolled and compacted to required camber and gradient complete

|Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of2.5 mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level, uniform and free from streaks and holes.) Spec. No.: As directed

Demolition fo plain cement concrete in floor nreinforced in first floor exe. 15 cm thick. And disposal of debris as directed

Excavation in trenches, n exc. 1.5 m wide & n. exc. 1.5 m in depth & getting out in Hard/dense soil. And disposal of debris as directed

Hardcore of guage exc 63mm but n exc. 100mm deposited, spread and levelled in |layers n,exc. 15 cm thick watered and rolled/rammed to a true surface M &L broken stone or boulders.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15cm thick, spread levelled and rammed including watering complete.

Shingle filling in floors or pavings, laid in layers n exc. 15cm thick, sread, levelled, and blinded with earth and rammed including watering complete.

Provision of cement concrete in foundations, filling and mass concrete Type C2 1:3:6 (40mm graded aggregate).

Provision of RCC nominal mix in retaining alls, drains, etc. cement concrete Type B1 1:2:4 (20mm graded aggregates)

Formwork to faces of walls, Drains, retaining walls, abutments, parapets and staircase railings and similar work including attched pillasters, buttresses, etc., vertical or to batter, Rough finished surfaces of concrete Flat.

Brickwork with subclass 'B' bricks straight or curved on plan exc 6m mean Cement mortar.1:4

Supply and fixing deformed MS reinforcement 6-8 mm dia cut to length bent to shape and binding with wire annealed not less than 0.90 mm dia. TMT bars.

M&L for rendering 12 mm thick in CM 1:4 on fair faces of block masonry or concrete surfaces finished with floating/setting coat.

Providing RCC precast cement concrete Type B-1, 1:2:4 (20 mm graded aggregate) set in cement mortor 1:4, in cover slabs (for manholes) etc.

S/F Reinforced cement concrete pipes, NP2 laid & jointed complete with collars 600 mm dia with Lime concrete with lime mortar 1:2 (lime sand/ surkhi) and using brick coarse aggregate bedding.

devdas pawar (BID ID -717324)