EDCH-19/2025-26

Amount

Supply of Following Matarial as per relevent ISS

Stone Pad

Cross Arm holding Clamp

F Bracket

Earthing Complete

AL LUG Long Barrel Off Size

Holding Clamp

M.s Top Channel 125x65x2240 mm

MS Dropper Channel 100x50x2028 mm

MS Channel T-off 125x65x1300 mm

MS Angle T/F base With Clamp and nut,bolt

Red Oxide Paint

Aluminium Paint

Barbed Wire

Danger Board

Copper L Piece

Number Plate

Guarding Angle With Clamp

Connecting Lead 1x16 sqmm

LT Distribution Box Clamp

LT Pole Clamp with N&B

Earthwire Clamp

Suspension Clamp

Dead End Clamp

PG Clamp

I Hook

Pearcing Connector

Henley Type Tailless Unit Protection Cubicle Panel 500A, 650V

LT Fuse Set Protection Unit for 25 KVA DT with SMC Box

Clamp for LT T-off Channel with N&B

Insulated Weasel Conductor

M/s Nut & Bolt

Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

Pcc Pole 8.5 Mtr. Long

STP Pole 11 Mtr. Long

11 KV Steel Cross Arm V Type

11 KV Pin Insulator With Pin

11 KV Disc Insulator With Fitting

LT Distribution Box

Fuse Set

Stay set Complete

63 KVA 11/0.4 KV T/F

100 KVA 11/0.4 KV T/F

250 KVA 11/0.4 KV T/F

LT XLPE/PVC Cable 3.5x70 Sqmm

LT XLPE/PVC Cable 3.5x150 Sqmm

LT XLPE/PVC Cable 1x400 Sqmm

LT ABC Cable 3x120+1x95+1x16 sqmm

LT ABC Cable 3x95+1x70+1x16 sqmm

ACSR Rabbit Conductor

ACSR Weasel Conductor

11 kv XLPE Cable 3x120 sqmm

Cable Jointing Kit 11 kv XLPE Cable 3x120 sqmm

G.I Wire

11 KV TPMO with Polymer Insualator

Errection of following Poles with grouting including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Pcc Pole 8.5 Mtr. Long

STP Pole 11 Mtr. Long

Fixing/ Errection of following item, cost of labor, material and T&P which required for completion of work

Stone Pad

Cross Arm holding Clamp

F Bracket

AL LUG Long Barrel Off Size

Holding Clamp

M.s Top Channel 125x65x2240 mm

MS Dropper Channel 100x50x2028 mm

MS Channel T-off 125x65x1300 mm

MS Angle T/F base With Clamp and nut,bolt

Red Oxide Paint

Aluminium Paint

Barbed Wire

Danger Board

Copper L Piece

Number Plate

LT Distribution Box With Clamp

Earthwire Clamp

PG Clamp

Henley Type Tailless Unit Protection Cubicle Panel 500A, 650V

LT Fuse Set Protection Unit for 25 KVA DT with SMC Box

Clamp for LT T-off Channel with N&B

M/s Nut & Bolt

11 KV Steel Cross Arm V Type

11 KV Pin Insulator With Pin

11 KV Disc Insulator With Fitting

Fuse Set

11 KV TPMO with Polymer Insualator

LT Pole Clamp with N&B

Suspension Clamp

Dead End Clamp

Cable Jointing Kit 11 kv XLPE Cable 3x120 sqmm

I Hook

Installation of 63 KVA 11/0.4 KV T/F on newly constructed double pole in proper alignment direction & making HT/LT connection.

Installation of 63 KVA 11/0.4 KV T/F on newly constructed double pole in proper alignment direction & making HT/LT connection.

Installation of 250 KVA T/F on newly/Old constructed Plinth in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for completion of work

Safe Dismenteling of old Conductor/Line with opening of all HT/LT Jumpers, all works which required for dismentling of Line.

Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.

Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor/GI in 11 KV/LT lines as per RESPO manual and as per direction of supervising engineer.

LT XLPE/PVC Cable 3.5x70 Sqmm

LT XLPE/PVC Cable 3.5x150 Sqmm

LT XLPE/PVC Cable 1x400 Sqmm

LT ABC Cable 3x120+1x95+1x16 sqmm

LT ABC Cable 3x95+1x70+1x16 sqmm

ACSR Rabbit Conductor

ACSR Weasel Conductor

11 kv XLPE Cable 3x120 sqmm

Connecting Lead 1x16 sqmm

Insulated Weasel Conductor

Construction of plinth of size 2x2x1.5 M above ground level one ft below the ground level of 9" After Exavation of 4 "earth brick ballast shall be provided and rammering will be done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9"width by fist class brick in ratio 1:4 of cement & sand shall be made . The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6"from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand.

Pipe & Water Level earthing of 250 KVA medium Power Transformers

Net Fencing Shall be 1150*1200 mm made of 35*35 mm MS Angle covered by expended netal 14 SWG up to full Height 1200 mm duly steftened by MS flat by an 8 SWG dia bolt & nut

Cutting,chopping of Tree Branches

Re Guarding / Guarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr.

Back Cartage of Following Material and carriage it up to Store Hathras/ J.E Store all cost of labour and T&P which required for completion of work

Iron Scrap

AB Cable/Weasel Scrap

Bobby Electricals (BID ID -5534444)