Special repair to NICU at paediatric ward, LTAC ward and Radiotherapy Dept at basement of AHRR under GE E/M RR Hospital, Delhi Cantt-10

Amount

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and directed.

M & L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1 : 4 on walls for fixing of tiles complete all as specified and directed.

M&L for glazed ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and directed.

M&L for 18 to 20 mm thick granite tile of any type (table rubbed & polished) in floor, window cills, etc. and like in CM (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for double charged Light shade vitrified tiles, 10 mm thick (square/rectangular) joint less digital type, area of each tiles n exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

Dismantling of false ceiling of any description, any thickness including cover fillets and frame work complete all as specified and directed .

M&L for exposed GI frame/grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T runner of 24 mm size, suspended at 1200 mm C/C and cross T runner of 24 mm size, suspended at 600 mm C/C with interlocking arrangements to form grid of 600 x 600 mm, perimeter runner/channel of 15 mm size, main and cross T runner supported by 4 mm dia GI rod from slab / Roof, wall angle etc. with and including all fixing accessories and making good of disturbed wall surfaces complete all as specified and directed.

M&L for metal false ceiling, lay-in type, 0.5 mm thick, having tegular edge profile, duly powder coated, perforated type with glass fibre acoustic fleece, suitable for false ceiling grid/frame module of 600 x 600 mm size complete all as specified and directed.

M&L for false ceiling in step (s) comprising of 12 mm thick Gypsum board including GI frame work for seamless ceiling made of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 M length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including two coats of plastic emulsion paint complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 sqm each complete all as specified and directed..

S&F, Powder coated aluminium chowkhats of 100x44x1.5 mm section with rebate complete frame complete all as specified and directed.

S&F 3mm thick aluminium composite panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) complete all as specified and directed.

Supply fabricating and fixing aluminium sliding door powder coated of extrusion aluminium section, vertical style of door shutter of size 85mmx44.45mmx1.8mm thick. Top, middle and bottom rail of size 85mmx44.45x1.8mm thick and fixing 5.5 mm thick plain/frosted sheet glass or 3mm thick aluminium composite panel with aluminium beading and rubber gasket/beading as directed including provision of one mortise lock for aluminium door (each) and two aluminium tower bolts of 200 mm size and 02 Nos American type handle of size 250 mm for each door fixed with rawl plug including making good of floor/wall to match the existing surfaces all as specified and as directed .

S&F aluminium powder coated glazed three track sliding window of frame 100 x 44 x 1.5mm and sliding shutter of section 40 mm x 19 mm including 3mm thick sheet glass, ordinary quality exceeding 0.5 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including all fittings such as aluminium handle of size 100 mm and locking arrangements with each moving leaf complete all as specified and directed.

S&F in repair toughened glass (frosted) frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc. and all kind of SS patch fitting & fixture, spider patch etc., complete all as specified and directed.

S&F of stainless steel handle 450 mm long fixed to 12 mm thick toughened glass door with and including all fixing accessories i. e. bolt washer, adhesive etc., complete all as directed.

S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughened glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc. of suitable size, complete all as directed.

M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixing complete all as specified and directed.

M&L for complete removal of existing treatment on walls surfaces and providing a layer of 1-1.5 mm thick wall putty on plaster surfaces of wall, preparation to receive plastic emulsion/distemper etc, complete all as specified and directed.

M&L for applying two coat of oil bound distemper with roller on wall surface over a coat of primer, complete all as specified and directed.

Taking up or down tubing GI 15 mm dia incl all fittings complete all as specified

S & F of medium grade concealed galvanised steel water tubing with all fittings fixed to wall or laid in floors for 15 mm bore, with and including for cutting chases, pinning in, making good to where required in cement mortar 1:3 complete all as specified and directed.

S&F vitreous China white colour wash hand basin, counter type of size 650x500x170mm complete all as specified.

S&F of white colour, 1st quality vitreous china washdown water closet pan (pedestal pattern) fancy type including built in vitreous china flushing cistern dual flush type of capacity 10 litres including PVC white seat cover, complete all as specified and directed.

S&F in replacement of 15 mm dia PVC connection 45 cm long complete all as specified and directed.

S&F in replacement of 15 mm dia Brass CP connection and 45 cm long with 2 Nos brass check nuts with washers for geyser, complete all as directed.

M&L in repair 15 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair of 15 mm Bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in replacement of wash basin mixer, with out popup waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mm bore pipe, complete all as specified and directed.

S&F in repair Toilet paper holder, vitreous China, box type fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in replacement of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed.

S&F in replacement of two way bib cock suitable for 15 mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified and directed.

S&F in replacement of hand shower (health faucet) with 1.5 mtr long, 15mm bore flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F in replacement of PVC made multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450 mm, complete all as specified and directed.

M & L in repairs for Cast iron floor trap of 75 mm outlet plain with grating including jointing to waste pipe with cement joint, bedded in cement mortar 1:3 complete all as specified and directed.

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches complete all as specified and directed.

S&F 100 mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors or in trenches complete all as specified and directed.

S&F 75 mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors or in trenches, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings in any position thickness. (Below or above ground level) and removing rubbish off premises n exc 500 m complete all as specified and directed.

M&L PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) in sunken floor using water proofing compound complete all as specified Note: Water proofing compound shall be measured & paid separately

M&L for rendering 15 mm thick in CM 1:4 on concrete surfaces in using integral water proofing compound as per manufacturer's instructions for floor and sides of wall in sunken floor complete all as specified and directed. Note: Water proofing compound shall be measured separately as supply only.

Supply only integral Water proofing chemical

M&L for applying 3 mm thick water seal 132 Make - Coral or equivalent in Dr FIXIT/FOSROC on plastered surfaces in sunken floor complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in flooring smooth surface finished complete all as specified and directed.

M&L for surgical scrub station made of stainless steel 304 gde suitable for 02 nos surgical tap / mixer (weight of scrub station 60 Kg to 75 Kg) complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed by the Engineer-in-Charge.

M & L for 15 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement , complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed

M&L in repair 18 mm thick MDF board with both side laminated fixed with SS screws as in cupboard and cupboard shutters including leeping/beading fancy type and polish of the same complete all as specified and as directed.

S&F soft closing clip on hinge, full / half overlay type, of stainless steel, complete all as specified and directed.

S&F multipurpose lock 50 mm size with triple keys, suitable for cup board door/drawer ,complete all as specified and directed.

S&F of cup board / drawer knob of stainless steel with matt finish fixed with screw, complete all as specified and directed.

S&F telescopic type ball bearing slide & runner, suitable for drawers, complete all as specified and directed. Note:- Length in closed position is to be measured.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M & L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 etc., including demolition of old brick work complete all as specified and directed.

S&F of SS (Gd-304) brackets, angles, hollow tubes, flats etc. of any shape and size with & including SS screws / fasteners etc. and all kind of machine works i.e. cutting, welding, bending, moulding, grinding, polishing, buffing etc. to get the required shape and size, fixed to any position and at any surface etc., complete all as directed. (Note : All fixtures and fittings should be of stainless steel)

S&F in repairs roller blinds vertical type made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified.

Removal of demolished material or soil to a distance n.exc 500M and depositing where directed at a level n.exc. 1.5 M above the starting point.

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete with switches, ceiling rose, pendent holder, regulator, bell, sunken box and socket etc. and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc. as original i.e. brick work, plastering, white washing complete all as directed.

Taking down sub main wiring any type complete all as specified and directed.

Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked in and including concealed PVC conduit medium grade wall thickness not less than 1.6 mm and 1.5 Sq mm (nominal area) FRLS, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly, fixing of Metal flush box of suitable size including top cover of suitable size for fixing modular switches / sockets / fan regulator etc. and making good surface as original by plastering and whitewash/ colour/ distemper etc., complete all as specified and directed for one light point / fan point / exhaust fan point / bell / buzzer controlled by one 1-way switch/ bell push. (Note : The cost of modular type Metal boxes and modular accessories like inner and outer cover plates etc. will be paid separately as supply only)

All as per srl item No. 64 here in before but point wiring for one socket outlet point 5 amps on the same board.

All as per srl item No. 64 here in before but point wiring for one socket outlet point 5 amps on the independent board.

All as per item No. 66 here in before but wiring with 2.5 Sqmm FRLS copper wire and 2.5 Sqmm earth wire for socket out let 6/16 Amps on independent board.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in & including PVC conduit 25 mm dia and wall thickness not less than 1.6mm and including 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified and directed. Note : The two run of main wire, one run of earth wire and PVC conduit shall be measured as unit length.

All as per srl item no. 68 here-in-before but with 2 run of 6.0 sq. mm FRLS copper wire with 6.0 Sqmm FRLS copper cable as earth wire.

All as per srl item no. 68 here-in-before but with 2 run of 10.0 sq. mm FR copper wire with 10.0 Sqmm FRLS copper cable as earth wire.

All as per srl item no. 68 here-in-before but with 4 run of 10.0 sq. mm FR copper wire with 2x10 Sqmm FRLS copper cable as earth wire in 40 mm dia PVC conduit.

Supply & fixing Modular switch 6 Amp, 1 way, 1 module size complete all as specified and directed.

Supply and fixing Modular switch 16 Amp, 1 way, 1 module size complete all as specified and directed.

Supply and fixing Modular socket 6 Amp, 2/3 pin, shuttered type, 2 module size complete all as specified and directed.

Supply and fixing Modular socket 16 Amp multipurpose shuttered type, 3 module size complete all as specified and directed.

Supply and fixing Modular Bell push switch with indicator 6 Amp, with indicator lamp, 1 Module size complete all as specified and directed.

Supply and fixing Modular Fan regulator step type, 120 watts, 2 Module size complete all as specified and directed.

Supply and fixing Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps ,complete all as directed.

Supply and fixing electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as specified and directed.

M&L in replacement MCB 6 to 32 Amp, C Curve type, 10kA, single pole with over load and short circuit protection complete all as directed.

All as srl item no 80 here in before but of 40 to 63 amps capacity.

All as srl item no 80 here in before but of 40 to 63 amps capacity and SPN type.

Supply and fixing in replacement of MCB TPN 80 Amps, 10 kA with over load and short circuit protection complete all as specified and directed.

S&F in replacement MCCB Incomer distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, TPN 8 way, 415 volts with copper bus bar rating 250 Amps for each phase, dust and vermin proof and IP 43 protection for provision of MCCB, MCBs as required at site including necessary cutting chasing and making good the disturbed surfaces complete all as specified and directed.

Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections ccomplete all as specified and directed.

All as srl item no 84 here in before but of TPN 04 way type.

S&F in replacement of MCCB, 415 volts, four pole of capacity 125 Amps, 25 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including spreader terminals, phase barriers, thimbles of suitable size etc and making electric connections complete all as specified and directed.

Supply and fixing in replacement of MCB protected modular AC/Geyser box complete with and including 6 pin socket, plug top, modular cover plate, mini MCB SP 25 Amp capacity and PVC gang box etc, complete all as specified and directed.

Supply and fixing of Rigid non metallic PVC conduit ( ISI marked) medium grade, 20 mm dia (external) for sub main / telephone / TV wiring of 1.6 mm wall thickness inclusive of all fittings such as tees, bends, elbow, reducers, bell mouth tube ends etc and all fixing accessories such as couples, bolts, nuts, saddles, pipe hooks etc including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as specified and directed.

Taking down ceiling fans/exhaust fans/wall fan/cabin fans including disconnection of electric connection complete all as specified and directed.

Fixing only ceiling fan complete and connecting up including provn of cable from ceiling rose to fan 0.75 sqmm 3 core including painting with white paint by spray with marking of MES No with black paint of suitable size letters complete all as specified and directed.

Fixing of exhaust fan complete and connecting up including provn of cable from ceiling rose to fan 0.75 sqmm 3 core including painting with white paint by spray with marking of MES No with black paint of suitable size letters complete all as specified and directed.

Supply and fix Exhaust fan AC single phase 220-240 V of size 300 mm sweep metal body heavy duty including self closing louver and fixing accessories, complete all as specified and directed. Note: PCC/ brickwork for making round hole in wall suitable for 300 mm size exhaust fan including in quoted rates

S&F in replacement tube light fitting 10 watt (CW), 2 feet long in extruded aluminium batten with high efficient LEDs available in clear & milky diffuser and Colour Rendering Index (CRI>70), IP20, correlated Colour Temperature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V complete all as specified and directed.

S&F in replacement tube light fitting 18 watt (CW), 4 feet long in extruded aluminium batten with high efficient LEDs available in clear & milky diffuser and Colour Rendering Index (CRI>70), IP20, correlated Colour Temperature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V complete all as directed.

S&F in replacement of recessed/pendant mounting LED light fitting (flat panel) 2' x 2' with high efficient LEDs and Glare free opal diffuser of 36 watt (CW) including fixing accessories likes strip clips and Colour Rendering Index (CRI>70), IP20, correlated Colour Temperature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V etc. complete all as specified and directed.

S&F in replacement recessed mounted LED light fitting 15 watt(CW) slim round down lighter with high efficient LEDs and glare free opal diffuser including fixing accessories likes strip clips and Colour Rendering Index (CRI>70), IP20, correlated Colour Temperature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V etc. complete all as specified and directed.

Materials and labour for Fastrack RA 035 ceiling Column Rigid ICU pendant with standrad accessories powder coated aluminium with 8 Nos of electric switch socket with provision of 4 oxygen, 3 suction, 2 compressed air and 1 N2O outlets, IV Tree system available with minimum 4 points complete all as specified and directed

Taking down carefully any types of fire alarm detector( Smoke, Heat ) and refixing after servicing/cleaning all detectors on existing locations and testing the fire alarm system in presence of Engr-in-Charge.

Supply only 1 to 2 module metal flush boxes with top, bottom, side and back wall knockout for conduit entry from any direction with inner and outer cover plate complete all as specified and directed.

All as per item No 100 here-in-before but 3 module

All as per item No 100 here-in-before but 4 module

All as per item No 100 here-in-before but 6 module

All as per item No 100 here-in-before but 8 module

All as per item No 100 here-in-before but 12 module

Shivam Firetech Engineers

SHEELSONS ENTERPRISES

J D ENTERPRISES

SANJEEV ENTERPRISES

Salaria Builders

siddharthenterprises