Special Repair to road at Lekha Nagar Jabalpur under GE (East) Jabalpur

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400Sqm and depth not exc 50mm by using mechanical scarifier including removing to a distance not exc 50M from the starting point and stacking complete all as directed.

M&L for preparing existing black top surfaces or bituminous macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. on black top surfaces or bituminous macadam surfaces complete all as specified & directed.

Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for re-moving caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a prime coat of Cationic Bitumen Emulsion SS1 conforming to IS: 8887 at a rate of application of 0. 70 -1.00 kg/sqm on surface of WBM as specified in Table 500-3 of MoRTH specification using mechanical sprayer complete all as specified and as directed

M&L for premixed bituminous macadam for consolidated thickness upto 75mm or less with using 19mm graded (Grading 2) stone aggregate with minimum 4.0% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Premixed bituminous macadam shall be prepared in hot mix plant only. (ii) Premixed bituminous macadam shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for applying evenly a priming/ tack coat of Cationic bituminous emulsion RS1 conforming to IS : 8887 at a rate of application of 0.2 - 0.30 kg / Sqm by using mechanical sprayer on the bituminus surface of road, as specified in table 500-3 of MoRTH specification after cleaning the existing surface, complete all as specified and directed.

M&L for bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness with minimum 5.5% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Bituminous premixed asphaltic semi dense concrete shall be prepared in hot mix plant only. (ii) Bituminous premixed asphaltic semi dense concrete shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for repairs to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water ,scoring sunken surface in roads, paths etc. cutting around edges to least 25mm in depth, making good by filling in screened & graded road metal watering and well ramming including supply of road metal complete all as specified and directed.

M&L for preparation of existing bituminous road surfaces by removing dust, dirt grease and other foreign matters etc and after prepration of road surfaces, applying road marking paint having minimum 2.5 mm average thickness and 150 / 100 mm width with & including thermo plastic (Reflective) line marker paint/ compound of uniform surface finish conforming to BS 3262 (Part-I) 1989 read in conjunction with the MORTH specification 800.4 on bituminous surfaces in white/ yellow colour and super imposed with glass beads conforming to BS 6088 read in conjuction with the MoRTH specification 800.4 complete all as specified and directed. Notes:- (i) MORTH specification 800.4 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by GE. (ii) Shape, size & pattern of marking shall be as approved by GE.

Supply & Fixing metal tubular delineator made out of ABS round body fitted with 02 Nos 65 mm dia highly reflective reflectors made out of PMMA & mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated & thermoplastic elastomer 3 bands of green, red & yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC (1:2:4) (size of block :150 x 150 x 300mm), type B-1 using 20mm graded crushed stone aggregate complete all as specified & directed.

Supply & Fixing, in repair, cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector fixed with & including MS stud of suitable size as per manufacturer's instructions complete all as specified and directed.

Supply & Fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125 mm x 125 mm x 25 mm (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4 V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturer's instructions etc. all as specified & directed.

Dismantling stone slab or similar work of paver block sett in paving or in aprons etc, any thickness or description, laid dry or laid dry and pointed complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor, finished even and smooth without using extra cement complete all as specified and directed.

M&L for machine pressed precast cement concrete rubber moulded interlocking paver block, any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade, laid over and including 50mm thick M-sand complete all as specified and directed

Ditto as per above item but except paver block. ( Note : Old serviceable paver block obtained from dismantling will be re-used.)

Supply and fix polycarbonate reflective convex mirror of size 600mm dia made of ABS/ fiber/ plastic body with upper collar complete with mounting hardware i.e. necessary clamps & nut bolts etc mounted on and including 65mm dia MS pipe having 2.0M length duly painted with and including two coats of synthetic enamel paint as approved by GE over a coat of red oxide primer and fixed on the ground after necessary excavation and earth work in any type of soil, embeding the MS pipe in the ground with & including PCC (1:2:4) type B1 using 20mm graded stone aggregate (minimum PCC block size 200mmx 200mmx 200mm for proper grouting) complete all as specified and directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete including removal of debris to out side MD land complete all as specified & directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified & directed.

Reinforced concrete pipes class NP-2 with collar, laid and jointed in CM (1:1) and tested complete of 600mm bore pipe complete all as specified & directed.

PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping including necessary form work , weathering , slightly rounded or chamfered angles and throating complete all as specified & directed.

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified & directed.

Preparing plastered surfaces of wall and applying two coats of cement based paint over one coat of appropriate primer complete all as specified.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cm in thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

M&L for kerb stone of PCC (1:2:4) type B-1( using 20mm graded stone aggregate) of size 450x300x80mm and setting in CM 1:6 complete all as specified and directed.

Schedule of credit amount of Rs 12,985.00 to be deducted during AOC

J.P ENTERPRISES (BID ID -3283107)