Repair to floor, ceiling and misc repair work in QC (output) section of Insulation shop and repair to walls of Insulation section at OFCd

Amount

Dismantling boarding, any description, fixed in any position with nails

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

M&L for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)

Dismentaling of brick work or stone/ boulder masonary, built in cement mortar including all quoins, arches, pillers etc, but excluding ashler facings, dressed stone work and precast concrete articles.

M&L brick work with sub class-'A' brick straight or curve on plain exc 6m mean radious built in 1:4 cement mortar.

M&L brick work with sub class-'B' brick straight or curve on plain exc 6m mean radious built in 1:4 cement mortar. (except brick)

Labour charges for removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish of cement mortar

M&L for Brickwork with sub class ‘A’ bricks, straight or curved on plan to any radius in half brick thick walls built in 1:4 cement mortar

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter - flat surfaces.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like (Type B0 1:2:4 20mm graded aggregate).

M&L for applying neat cement slurry with 3.0kg of cement per sq. metre & rendering 15mm thick on fair faces of brick work or concrete surfaces 1:4 cement plaster, rendering is to be finished even and smooth (without using extra lime or cement)

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite

Labour charges for Chamfer, splays or arris in facework n. exc 15mm wide on Granite or trap stone.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Light Shade (Make Johnson/ Kajaria/ Nitco) (1st Quality)

M&L for Glazed ceramic tiles Coloured in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (Make Johnson/ Kajaria/ Nitco) (1st Quality)

M&L 15mm, 1:4 cement plaster screed bed or bedding layer of mortar for laying floor finish.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, existing PVC floor etc.

M&L for 4mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors (Make - LG or euivalent)

M&L for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified.(Minimum thickness of powder coating 50 micron)

M&L for double action door floor spring hydraucally regulated made of 1.25mm thick aluminium alloy sheet foundation box, main body with strain less steel cover governing pivot made of brass other parts made of mild steel, heavy duty and fixed.

M&L for 4.8mm thick sheet glass , ordinary quality and glazing with oil putty in square exc 0.5sq.mtr in each pane.

M&L for Prelaminated particle board, 12mm thickness, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work / aluminium work.

M&L for aluminium handles, cast type, anodised 150mm.

M&L for aluminium anodised, barrel tower bolts of extruded section and fixed 150mm.

M&L for Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm.

M&L for 18/19mm, block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both face, (Kit ply, Green Ply, Century)

S&F for 30mm width of flaps continuous (piano) hinges, brass, bright finish or electrogalvanised

M&L for 125mm, Brass handles, cast type, polished bright, sample will be approved by EIC.

S&F for hasp and staple in 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed / matgnetic door catcher

M&L for 3mm thick wall care putty on wall (Birla putty / JK putty)

M&L for Plastic Emulsion for surfaces of any description over 10cm girth or width, not otherwise described double coat (Make: Asian Paints/ Nerolac/ Berger/ ICI).

Removing excavated soil /material exc. 1.5 km but n exc. 5 km and depositing where directed.

Taking down carefully aluminium /copper point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling rose, pendents, regulators, sockets etc to be measured sepatately) removing material to store for keeping in safe custody or for taking creadit, at site and making good disturbed surfaces of walls floors etc.

M&L for concealled type wiring for one light point or one fan point or 5A plug point controlled by one switch with 1.5 sq mm size PVC single core sheathed copper cables in PVC conduit (Make Finolex/ Havells/ Standard/ Plaza).

M&L for flush type single pole, one way 5 Amp, piano type (Make Anchor/ Cub/ Cabtree/ Cona)

M&L for socket outlet 3pin /2 in 1, 5amp flush type (Make Anchor / Cabtree / Cub)

M&L for concealled type wiring for 15A socket out let with 2.5sqmm copper conductor cables in PVC conduit, independent wiring for each power point and additional 1.5sq.mm copper conductor cable for earth. (Make Finolex/ Havells/ Standard/ Plaza).

M&L for 15A switch piano flush type single pole one way (Make Anchor/ Cub/ Cabtree/ Cona)

M&L for socket outlet 2 in 1, 3 pin, 5 and 15amp flush type (Make Anchor / Cabtree / Cub)

M&L for cutting chases, pinning in making good to facing where require and pointing in cement morter 1:3 to ends or edges of landings, steps, chills, sunssades, selves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exc 10cm grith on brick walls.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete (Make Phillips / Syska/Bazaz/ Wipro / CG).

M&L for sheet metal encloser for DB (SPN) for MCB to be use 8 way double door 240Volts (Make Havells /MDS/ L&T/ Legrand/ IndoAsian / MDS)

M&L for sheet metal encloser, 415volts, Triple pole and neutral, Double Door, 12 way (Make - Havells/ MDS/ Indo Asian/ L&T)

M&L for 100A Isolator (MCB) TPN / 4 pole (Make Havells/ MDS/ IndoAsian)

M&L for 63A Isolator (MCB) SPN/ double pole (Make Havells/ MDS/ L&T/IndoAsian)

M&L for 10A Isolator (MCB) single pole (Make Havells/ MDS/ L&T/ IndoAsian)

M&L for 20A Isolator (MCB) single pole (Make Havells/ MDS/ L&T/ IndoAsian)

M&L for 40A Isolator (MCB) single pole (Make Havells/ MDS/ L&T/ IndoAsian)

M&L for MCCBs 415V, 16KA, 4 Pole, 125A, (Make Havells/ MDS/ L&T/ IndoAsian)

EARMARK INFRATECH INDIA PVT. LTD.

IRFAN AHMAD