PROVN OF DOUBLE STOREY SENTRY POST WITH ALLIED INFRASTRUCTURE AT HAMIRPUR WITHIN AOR OF AGE B/R-II UNDER GE (SOUTH) AKHNOOR

Amount

Total amount of Schedule 'A' Part- I (Building Work) Note:This Schedule is not pre-priced by MES and the Pre-priced rate indicated as Rs 0.00 under col 5 signifies this fact only.

Provn of Double Storey Sentry Post alongwith allied infrastructure, complete all as specified and as shown on drawings. (Building Work)

The Schedule'A'- Part II to VII are pre-priced by MES.

Total Amount of Sch'A'-Part-II (INTERNAL WATER SUPPLY WORKS )

Total Amount of Sch'A'-Part-III (INTERNAL ELECTRIFICATION WORK)

Total Amount of Sch'A'-Part-IV (SEWAGE DISPOSAL WORK)

Total Amount of Sch'A'-Part-V (AREA DRAINAGE WORK)

Total Amount of Sch'A'-Part-VI (ROAD / PATH / INTERLOCKING TILES WORK )

Total Amount of Sch'A'-Part-VII (EXTERNAL ELECTRIFICATION WORK)

Sch 'A' Part-VIII (MISC ITEMS) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "`. 0.00" under Col.5 signifies this fact only.

Septic tank for 25 users LLDPE (Linear Low Density Polyethylene) with upflow filter including media type with vent pipe, cowl etc. designed to carry sewage and sullage water, including excavation in any type of soil as per size of tank , PCC 1:4:8 Type D-2(using 40mm graded crushed stone aggregates)as bed concrete, lowering the septic tank and filling with water and return/filling with mix of coarse sand and Bajri around the septic tank and do inlet and outlet pipe connection etc complete all as specified and as directed. Make: Sintex /Comfort polymers/ Polycon/Diplast.

Construction of soakage well of 1.2 mtrs dia and 3.0 mtrs in depth, in any type of soil including plain cement concrete M-10(1:3:6), type C-2 (using 40mm graded crushed stone aggregates) in foundation and honeycombed brick masonry in cement mortar 1:4 and reinforced cement concrete cover slab, M-25, type A-1 (using 20mm graded crushed stone aggregates), complete all as specified and as shown in drawing. Drawing No- CE/TD/1202/03 sheet 1/2 and 2/2 dated 09.10.03 revised 14.10.14 and 11.05.07.

S&F Exhaust fan, mettalic, sweep 250/ 230mm, superior rating for energy saving, mettalic blades, copper wounded motor complete with electronic fan regulator including hanging accessories i.e. U-clamp, down rod, canopy and nut bolts, washers, complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- FHVDBMTGRY09 (Ventilair DB Neo)/ Crompton Greaves/ Usha/ Bajaj/ Orient.

S&F 4 feet highly engineered plastic body suitable with fully diffused diffuser for general lighting in areas. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 1800 nominal lumens and an outstanding solution efficacy of atleast 100 lumen/watt and maximum system wattage of 18 Watts. The electronic driver used shall have a power factor >0.95 and THD <20% with 4 KV internal surge protection. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters and including suitable size and length of flexible copper wire and making the connection, complete all as specified and as directed by Engineer-In-Charge. Make : Bajaj cat part No BCLSB 18 WH or Equivalent makes in Wipro/Philips. Warranty certficate for 2 years to be provided by Employee of Organization of Terittory.

T bulb curve, 12 Watt LED base B22 cool day light, complete all as specified and as directed by Engineer-In-Charge.

S&F of high-quality integrated LED Street Light with a minimum system lumen of 4950 Lm and system wattage not exceeding 45W with a nominal efficiency 110 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with heat resistant toughened clear glass to with stand extreme environments with PF > 0.95. Lifetime of 50K hours @L70.The Ingress protection should be minimum IP 66 with an IK rating of 07. The Luminaire should have 4KV internal 10KV external surge protection in the Luminaire.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters and including suitable size and length of flexible copper wire and making the connection including House service bracket for mounting light fittings House service bracket any type complete with 1.50mtr long galvanised iron pipe 40mm dia medium grade, bent to required shape including mild steel clamps of flat iron 40x6mm, hook, stay, nut, bolt and washer including painting with two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified, complete all as specified. Make : Bajaj cat part No ENXT P 54L WH PO PC SD or Equivalent makes in Wipro/Philips. Warranty certficate for 2 years to be provided by Employee of Organization of Terittory.

M/S MOOL RAJ SHARMA

M/s Liaqat Hussain Construction Company

M/S JEEVAN LAL SHARMA