GENERAL FUND SCHEMES 2023-2024 PROVIDING OF NEW SUBMERCIBLE MOTOR WITH PIPE LINE AND SINTEX AT 18TH WARD MUTHAMIL NAGAR NAGAR ESWARI HOUSE NEAR FOR EXISTING BOREWELL IN CHINNALAPATTI TOWN PANCHAYAT .

Amount

PIPELINE

Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 %

2 HP Submercible motor (Motor should give 20 lpm x 150m head)

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

2HP Panel board

Supply and delivery of Water supply Materials inculding loading, unloding and transporting etc., complete

Adopter

Bore Kitty

2.50 sq.mm submercible cable

32mm dia ISI UPVC Pipe

1000 litres capacity HDPE tank

32mm dia.G .M.Non-Return Valve

32mm dia ISI G .M.Gate valve

32mm dia.G.I Hex Nipple

32mm dia. GI Union

32 mm dia ISI G.I. Pipe

32 mm dia. GI Ellbow

32 mm dia. GI Bend

32 mm dia. GI coupling(Heavy)

25mm dia ISI G.I Bend

25mm dia ISI G .M. Gate valve

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.

Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Brick Work in Cement Mortor 1:5 Mix (one cement, five M- Sand ) using new best country Bricks of size 8 ¾” x 4 ¼” x 2 ¾” from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.

Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3

Supply and fixing of cudapah stone slab 50mm thicknees for cupboard arrangement including polishing etc., complete and as directed by departmental officers

Plastering in Cement Mortor 1:5 Mix (one cement, five M- Sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Painting new iron works such as steel doors, windows, rolling shutters, ventilators, window bars, balusters etc., with two coast best approved fresh quality and colour of synthatic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complying with standard specification

Painting the new walls two coats over one coat of priming with best cement paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

K T R CONSTRUCTIONS