VILLAGE BHURTHLA MANDER BLOCK MALERKOTLA1 DISTRICT SANGRUR PRWSSIP Component 2ai

Amount

Component -1

Providing & Fixing Electric Panel Board (ISI marked) Consisting of electric appliances such as Automatic star Delta Push Button with oil immersed starter, Main switch, VM ampere Meter, E LCB, shunt capacitor, single phase Preconter, including lamps, Kit-kat etc. Complete in all respect.

Repair of Pump Chamber

White washing scraping inside of Pump Chamber

Scraping of snowcem robbiacem etc.

White washing 2 coat inside of Pump Chamber

Finsing Wall with exiterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint

Painting two coats excluding priming coat with ready mixed paint in all shades on old wood work With special quality paint.

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.

Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade.

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.

Supplying & fixing glass panes including special metal sash putty of approved make.

Congolmerate floor 40mm thick cement concrete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand as stone filling for plinth protection.

Repair of door & window complete in all respects..

Repair of electric fitting complete in all respects..

Repair of OHSR

Repair of Expansion Joint. Size 150 mm i/d complete in all respects.

P/F OHSR Jali complete in all respects.

Repair of Wall leakage including scraping & plastering complete in all respects.

Painting of OHSR pipes including cost of labour & material complete in all respects.

Painting of OHSR stair case railing and pickets including cost of labour & material complete in all respects.

Repair of plinth protection around OHSR with masonry toe wall & inside earth filling with lead 5 kms. complete in all respect as per drawing D-9 & Analysis of Rates A-10-1 to A-10-6 complete in all respects.

OHSR-100000 ltr Capacity outer dia of toe wall = 7.60 m

Repair of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Repair of brick masonry corner pillar complete in all respects.

Repair of gate pillars complete in all respects.

Cement concrete 1:8:16 with 40 mm gauge stone aggregate to be used instead of brick ballast for foot path.

Conglomerate floor 40mm cement concrete topping 1:2:4 for foot path.

Painting two coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. (a) With special quality paint

Finishing walls with exterior decorative cement based paint such as snowcem an new work in two coats of main gate piller & corner piller.

Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.

Detail of Repair and minor Replacement of existing pipe line

Provision for making new connection with exit pipe line as per analysis A-20 complete in all respects.

Automated water controller switch to start or stop the pump based on water reservoir level complete in all respects.

Component -2

Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Component -3

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department with each of Size 0.6m x 0.6m

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department with each of Size 0.9m x 0.9m

Painting on Board both sides including priming coat , printing & Map as per Water Supply & Sanitaton standard

Cost of Component-4 (Operation and maintenance)

Provision for sodium chloride for disinfection of water Complete in all respect.

Credit of old Sluice Valve

BALJIT KUMAR CONTRACTOR