I&CADD

Clearing thick jungle growth (less than 50 percent open space) including bushes upto 30 cm/parthenium and other weeds including burning or disposing off the same as directed etc., complete.

Cutting and removing jauliflora bushes upto 1.5 m girth excludingremoval of stumps and including burning or disposing off the materials as directed with initial lead upto 50 m and all lifts.

Repairing rain cuts / resectioning canal slopes to required lines and grades as directed using available soil including dressing, clod breaking, packing, tamping etc., complete with all leads and lifts.

Removal of Natchu, goobi, thooti, etc (in tank )

Removing and resetting disturbed dry rubble / khandki stone pitching 25 to 45 cm thick including packing, wedging, finishing etc., complete with all leads and lifts.

Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Providing and laying insitu vibrated M-10 ( 28 days cube compressive strength not less than 10 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning,etc., complete with initial lead upto 50 m and all lifts. (Cement content: batching, mixing, placing in position, levelling, vibrating, finishing, curing 220 kg / cum with use of super plasticiser(0.4% by wt. of cement),CA :0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum)

Providing and laying insitu M- 15 ( 28 days cube compressive strength not less than 15 N /sqmm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for sub-structure/super structure works including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position levelling, vibrating, finishing, curing etc., complete with initial lead upto 50m and all lifts. (Cement content: 280 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum)

Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes conforming to B.I.S. 458/2003 at exfactory (rate per meter of effective length) Excluding transportation & taxes. (900 mm dia)

Laying and jointing 900 mm dia. NP- 3 class or IRC standard hume pipes in CM 1 : 2 proportion by volume including cost of all materials ( excluding pipes and collars ), machinery, labour, aligning, packing joints with hemp,finishing, curing etc., complete with initial lead upto 50 m and all lifts.(Cement content: 44.6 kg / joint, FA : 0.045cum/joint, Hemp Yarn : 0.34kg/joint)

OT sluice EM Parts: Fabrication, supply, erection, testing and commissioning of sill beam, slide tracks, seal seats, guide plates etc with all accessories including cost of material, machinery, labour etc complete as per specification of drawings and approved drawings (Excluding wastage of steel @2.5%)

OT Sluice Gate: Fabrication, supply, erection, testing and commissioning of Skin plate, Horizontal and vertical angles, stiffeners, rubber seals, clamps with all accessories for sluice shutters including cost of all materials, machinery, labour, seal fixing etc complete as per specification of drawings and approved drawings (Excluding wastage of steel @2.5%)

OT Sluice Hoist & Hoist Bridge Gear Hoist Including Platform for Below 5 Tons Capacity (Small Gates): Fabrication, supply, erection, testing and commissioning of Embedded Parts consisting of Supporting Structure and Platform etc with all accessories for sluice shutters including cost of all material, machinery, labour, cutting, bending, aligning, anchoring, welding, finishing etc complete as per specification of drawings (Excluding wastage of steel @2.5%)

EM PARTS: Surface cleaning of metal surface by chemical cleaners and then by hand and power tool cleaners and removing dust. After cleaning, applying primary coat with one coat of protective mastic to a thickness of 70+5 microns, followed by finishing two coats with solventless coal tar epoxy each coat with a DFT of 150+5 and the total DFT of all coats including primary coat should not be less than 350 microns with material, labour and all accessories with all leads and lifts.

GATES: Surface cleaning of metal surface by chemical cleaners and then by hand and power tool cleaners and removing dust. After cleaning, applying primary coat with one coat of protective mastic to a thickness of 70+5 microns, followed by finishing two coats with solventless coal tar epoxy each coat with a DFT of 150+5 and the total DFT of all coats including primary coat should not be less than 350 microns with material, labour and all accessories with all leads and lifts.

HOIST & HOIST BRIDGE: Painting of Sluices for Maintenance works: Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and removing dust. After cleaning, applying primary coat with two coat of Zinc Chrome Red oxide primer followed by finishing three coats with synthetic enamel paint with material labour and all accessories with all leads and lifts.