WBPWD/SEWEC /HED /NIQ-12/2025-26

Amount

SITC of Microprocessor based addressable fully networkable 2 loop fire alarm control panel ( VDS / UL /ERTL/ LPCB / FM approved ) suitable for the devices as stated in thefollowing items of this BOQ along with 20% spare capacity with each loop loading not exceeding 80% of the full capacity of detectors and devices taken together, complying to IS 2189:2008 or its latest amendments, and with minimum 600 character alpha - numeric liquid crystal display.Thc panel shall be soft addressable type and shall be able to give pin point location of all fire/ fault conditions. Further, the panel must be able to automatically switch off respective control switches with help monitor module whenever any alarm is triggered. The Panel should be able to store sufficient numbers of log events in its Memory as per recommended standards. The panel should have extra loop card slot for expansion of capcity twice.

The panel shall have in built rectifier, provision for external & internal printer ( if required ), Loop cards, LCD unit to indicate Fire/Fault Signal with address and analog output, complete in all respects, in built Surge protection facility, integral SMF lead acid batteries with sealed cells of 24 V capable of running for 24 hours normal working and then be capable of operating the system for 60 minutes during Emergency condition, with integral battery charger complete in all respect as required. The FACP shall be capable of being networked ( future expansion ) with other similar FACP located at different part of the premises through single RS 485 modbus. The FACP shall have provision for interfacing with the public address system, remote computer and BMS interface.The system must be preloaded with licenced software. (Approved make : Honeywell/ Siemens/Edward/GST)

SITC of of Micropresssor controlled IP Addressable Intelligent Optical-Thermal Multi-criteria Detector ( VDS / UL /ERTL/ LPCB / FM approved ) ) with inbuilt optical smoke sensors and heat detector sensor with inbuilt short circuit fault isolator as per NFPA style 7 wiring, complete with base. (Numbers of addressable devices in a group will be as per latest recommended standards) (Make-Honeywell/ Siemens/Edward/GST

SITC of IP Addressable Manual call point ( VDS / UL /ERTL/ LPCB / FM approved ) with in built short circuit fault isolator as per NFPA style 7 wiring. (Numbers of addressable devices in a group will be as per latest recommended. (Approved make : Honeywell/ Siemens/Edward/GST)

SITC of Addressable Hooter-cum-Strobe ( VDS / UL /ERTL/ LPCB / FM approved ) (sound output of minimum 90 db) cum strobe (strength of light 10 cd) complete with inbuilt short circuit fault isolator. (Numbers of addressable devices in a group will be as per latest recommended standards) (Approved make : Honeywell/ Siemens/Edward/GST)

Supply & Laying of 2 Core 1.5 sq.mm FRLS shielded copper Cable (For Loop) (Make : Gloster/Finolex / Havells / RR Kabel / Polycab/KEI) with 20mm NB PVC 'FR' rigid conduit pipe (Red Colour) on the surface of the wall. (Make : Polycab/Presto/Precision-Medium).

Supply & Fixing 240 V, 3 nos. 20A plug socket with separate 3 nos. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 300x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required .(E-8 / 30)

Creative Projects (BID ID -6491193)

D. D. ENTERPRISE (BID ID -6501012)

G.M.N. ENGINEERING (BID ID -6471998)

KHOKAN MONDAL (BID ID -6471926)

MONDAL ENTERPRISE (BID ID -6472100)

MITRA ELECTRONICS (BID ID -6471818)