PROVISION OF LMG POST AND AS AS TO MANHOLE AND DRAIN COVERS AND KERB STONES AT NAVAL STATION ADYAR UNDER AGE(I) NAVY CHENNAI

Amount

Excavation in trenches, not exceeding 1.5 M wide, and not exceeding 1.5M in depth for foundation etc and geeting out in soft / loose soil complete all as specified and as directed

M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed

Returning filling-in including spreading, levelling, watering and well ramming in layers not exceeding 25cm using approved excavated soilcomplete all as specified and as directed

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed

Removing excavated spoil to a distance exceeding 250 Mtrs but not exceedng 500m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed

M & L for RCC of type 1:2:4, B-1( using 20mm graded aggregates) Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretes complete all as specified and as directed

M & L for RCC of type 1:2:4, B-1( using 20mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and as directed

M & L for RCC of type 1:2:4, B-1( using 20mm graded aggregates) as in roof Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed

M & L for RCC of type 1:2:4, B-1( using 20mm graded aggregates) as in slabs supported on walls, roof beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed

M & L for formwork to sides of concrete roof beams, sides soffits of lintel beams , and similar work, vertical or to batter, work in rough finished flat surfaces of concrete complete all as specified and as directed

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed

S & F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, and hooking ends and binding with and including mild steel wire (annelaed) not less than 0.9mm dia complete all as specified and as directed

S & F mild steel TMT bars 6 mmdia over upto and including 10 mm dia in strrups, spaces and binders and over, cut to length, bent to shape required, and hooking ends and binding with and including mild steel wire (annelaed) not less than 0.9mm dia complete all as specified and as directed

M & L for Brickwork with flyash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Hard core of broken granite stone broken to gauge n.exc. 63mm, deposited, spread, levelled in layers n.exc 15 cm thk watered and rammed to a true surface all as specified.

M&L for 150 mm thick Plain Cement concrete 1:4:8 type D-2 using 40mm grade stone aggregate as in sub base of flooring all complete as specified..

M&L for non- skid pin haded ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed

M&L digital ceramic wall cladding tiles of size 148.5mmx150mmx10mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM 1:4 complete all as specified and as directed

M & L for 15mm thick Rendering in two coats of ( 10 mm thick on first coat and 5mm thick in second coat) on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement on second coat complete all as specified and directed. ( Note : WPC shall be measured and paid separately)

Supply only Integral water proofing compound complete all as specified and as directed

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaes in CM (1:6) and finised even and smooth (without using extra cement) complete all as specified and directed

M&L for 10 mm thick rendering in CM (1:3) on ceiling on soffits and top of roof slab and finised even and smooth (without using extra cement) complete all as specified and directed

M & L for preparation of newly plastered / concrete surfaces and applying two coats of oil bound distemper over a coat of primer over one or more coat of birla wall care putty complete all as specified and directed.

M&L fo Preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. and over 2mm thick exterior birla wall care putty in two layers all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc etc complete all as specified and directed.

M&L for Preparation new plastered surfaces plastered and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for 2nd class HW Plain fillets. square, rectangular or triangular in section of exc 13 sqcm but n exc 25 sqcm, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed.

M & L for preparation of new wooden surface of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and 6mm thick 1st class teak wood beading around the shutters and any other balance portion 1mm thick decorative tape fixed with favicol, fixed with screws to timber frame work with SS angles cleats etc complete all as specified and as directed.

S&F 80mm Auto SS hinges of crank 0 degree to 90degree, fixed with screws to plywood or frame work as per sample approved by EIC

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed.complete all as specified and as directed

S&F CP decorative type SS handles 75mm long fixed to plywood or frame acomplete all as specified and as directed

S&F magnetic and connected plate to shutter and frame as per sample complete all as specified and as directed

S & F Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws for 150 mm size complete all as specified and as directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete

S&F factory made solid PVC moulded door shutter, 28 to 30mme thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete

S&F butt hinges 75mm size, Butt hinges, heavy weight, cold rolled mild steel, and fixed all as specified and directed.

S&F aluminium handles cast type anodised for 100 mm all as specified and directed.

S&F aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm all as specified and as directed.

M & L for 25 mm thick machine cut,Granite stone slab (of any type)(table rubbed and polished) in steps,jambs, pillars, windows, cills, cooking plateforms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges & including cutting for the shape for SS Sink complete all as specified and as directed.

M & L for 20 mm thick machine cut,Granite stone slab (of any type)(table rubbed and polished) for wall lining ( venering to wall) in cement mortar 1:3 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges as required at site complete all as specified.

Demolition of Brickwork built in cement motar, stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Provide cement concrete 1:2:4 type B-0 (12.50mm graded aggregate) as in coping and benching of manholes etc complete all as apd and directed.

M&L for Preparation new plastered surfaces plastered and applying three coat of white wash on walls complete all as specified and directed.

M&L for Provide precast cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in cover slabs (for man holes etc) chullah hoods, chajjas, water trough, managers, shelves & similar articles with plain faces set in Cement mortar 1:4

Excavation over area n exc 1.5 mtr deep and getting out soft /loose soil complete all as specified.

M&L75 mm thick PCC 1:4:8(40 mm graded stone aggregate ) type D-2 as in sub base

M&L for Machine pressed precast conctete interlocking glossy/ lacquer finish paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness including 2mm thick rubber mould glossy/ lacquer finish paver block of Grade M-35 and over sand cushion( Note- Sand will be measured and paid separately)

M &L 25mm thick sand filling (sand cushioning) under path for layers interlocking tiles.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc1.5m above the starting points

Demolition of Concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and directed.

M&L for Factory made precast cement concrete 1:2:4 type B-1 (using 20 mm and below stone aggregate ) in kerb stone factory made as approved by GE with plaine fair faces including champhering, weathering etc complete with joint to match in CM 1:6 complete all as specified and directed.

M&L Preparation of new kerb stone or plastered surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer.

S & PVC pipe 110mm dia single socketed in any length with rubber joints fixed to walls with Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S & F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S & F 160mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F PVC (SWR) bends any radius bore of dia 110mm with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius bore of dia 110mm complete all as specified and directed.

Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core FRLS drawn with PVC conduit of 19/20 mm dia,orasper is concealed FRLS wiring, along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof excluding Modular Metal flsh box and white cover palate with frame the switches, sockets, fan regulator etc as required suitable for Modular type fitting /fixture trll as specified and directed for One light point or one fan point controlled by one switch with cables 1.5 sq.mm size

All as per Sl item no. 61 above but for One 3 pin socket outlet 5 amps socket on independent board

S & F for Modular White cover plate with frame, 3 Module

S & F for Modular White cover plate with frame, 6 Module

S & F for Modular Metal flush box, 3 module

S & F for Modular Metal flush box, 6 module

S & F for sub main Wiring for Circuit of size 2 x 6.0 sq.mm along with earth wire of size 1 x 6 sq.mm, Single Core, PVC insulated copper coductor (FRLS) Cable in concealed / surface / recessed PVC Conduit

Supply and fix sheet metal enclosure powder coated single door outdoor type for Distribution Board, SPN 4 way DB with Degree of Protection IP 54 , Detachable Gland Plate, Box Insertion Marks •,Circuit Identification Label •,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed.

Supply and fix MCB SPN 32- 63 A , B curve including , Disconnecting electric connections, complete all as specified and as directed.

Supply and fix MCB SP 06 A to 32 A , B curve including ,complete all as specified and as directed.

Supply and fix master LED tube 4ft 20 W LED Tube with decorative box type fitting with aluminium housing and nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>80. pre wired fitted on and including two Nos PVC block of suitable size and connection up to tube light fitting with connecting up with copper 2 core flexible cord of minimum size 1.0 Sqmm and white in colour.The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) including taking down old unserviceable fittings any type including round block complete all as specified and as directed. Make :Crompton Cat No CCS-100-20-65-HL2-DP-NWH or equivalent in Phillips / WIPRO

Supply, Installation, Testing and Commissioning of LED floodlight 250W made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. System efficacy of 110LPW. Option for 3000K. 10KV SPD included. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. The luminaire should have cool white colour. The luminaire shall meet IP65 rating with THD<20% & Pf>0.9. The total power consumption should not exceed 250W (including driver) all as specified and as directed. Make CG,Bajaj,Philips.

M & L for New earthing complete with galvanised steel plate earth electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25 meter below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to GI wire 4mm at two points by means of bolts and nut, check nut and washers including charcoal dust, common salt, necessary excavation in hard/dense soil, returning filling in and removal of surplus soil to a distance up to 50metres, PCC pit in 1:3:6 type CI (using 20mm grade stone aggregate) RCC 1:2:4 type B-1 (using 20mm grade stone aggregate ) 50mm thick pit cover, reinforced with 8mm dia TMT bars 75mm c/c, both ways MS handle 12mm dia, GI funnel, wire mesh and GI watering pipe of 20mm bore GI (light grade) and earth lead protection pipe 20mm bore (light grade) all as specified, directed and shown in electrical plate No 3 of SSR Part-I including testing complete. Note : GI strip and protection pipes 20 mm GI light grade up to 7.5 metre is included in unit rate and beyond that the same will be measured separately.

Supply & fixing for GI wire 4 mm on wall/batten or recessed or buried in ground all as directed

S S BUILDERS