Work

Amount

Details of work.

Boring with 150mm dia casing pipe to a depth of 38.00 meter long from ground level with skilled and unskilled labour including all T&P, boring apprates and supervision charges etc. required for proper completion of work (Land in Rocky Area) (04 No. Job.)

Inserting 40x6mm GI Flat in 50 mm dia B-Class(jindal)ISI mark 6.0 meter long 3 pipe placed horizontally on ground and bolting the G.I flat with 150mm long 75x6mm copper plate conical piece on and then bolting the G.I flat with G.I pipe in such a way that copper flat remains in contact with the pipe. lowering of 6.0 meter long with G.I pipe with conical copper plate connected and at bottem along with G.I flat inside the pipe in boring of 150 mm G.I pipe pieces by G.I sockets along with 40x6mm. G.I flat running inside the pipe by making 150 cm lap joints 75mm above ground level. Taking out 40x6mm G.I flat from the upper end of pipe by making a cut of 45mm wide up to a depth of 50mm in upper portion of G.I pipe and providing 01 no. cap type G.I socket on upper treaded portion of pipe for water pouring in the pipe at regular intervals filling the space.(04 No. Job.)

Laying of 40mm dia M.S. round bar 800mm below ground level including cutting ,straightening ,welding ,painting excavation of trench, partially on rocky land and fishered soil ,its back filling and all other associated works to complete the work satisfactorily as per drawing and technical specification ,excluding the cost of M.S. bar.

Cutting, Fabrication and fixing of angle iron by welding including cost of electrodes, labour, T&P. Details of every job includes- (a) Taking out scrap angle heap of scrap, cutting the cleats of 50x50x6mm angle iron & shifting back the scrap (scrap angle iron will be provided by department). (b) Fixing of cleats of angle iron by welding including cost of electrodes, labor, T&P.

Fabrication of 3M long Electrode with 40MM dia M.S. rod having 150mm long conical shape and then its piercing vertically in side the ground with top 500mm.below ground level and its welding with earthmat, excluding the cost of M.S. bar.

Tendelta test of Bushing and CT analysis test of Turret CT of 160 MVA T/F by NABL Approved Lab which is mendotry as per agreement Condition.

Rates qouted by the bidders shall be without taxes. Taxes applicable if any to paid extra

S.D. ENTERPRISES

M/S V.K.T. SYSTEMS