REPAIRS TO ROOF, FLOORING SANITARY FITTINGS, BRICK WORK AT OTM ACCN IN WING-II AND IV AT ARTY CENTRE UNDER GE NASIK ROAD CAMP

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specified and directed

M&L for coloured non skid ceramic tiles 7mm to 8mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm set and jointed in neat cement slurry and pointed in coloured cement to match in floor etc complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 as in backing coat plaster on surfaces of stone masonary surfaces complete all as specified and directed

M&L for glazed ceramic tiles coloured size 300 x 200 x 7mm thick as on vertical surfaces, of walls as in skirting, dado etc set and jointed in neat cement slurry & pointed with coloured cement to match complete all as specified and directed

M&L for vitrified ceramic tiles (any shade (light/dark) 10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors, skirting etc set & jointed in neat cement slurry and painted in white or coloured cement to match.

S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and brackets fixed in repairs.

S&F Vitreous China wash down water closet (pedestal pattern) of any colour including plastic water seat with flat bottom and cover and mild steel chromium plated hinging device with Vitreous China flushing cistern 10 ltrs capacity dual flush and colour match with WC.

S&F Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs.

S&F Cast iron nahani trap 75mm dia of outlet, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

S&F 15mm bore bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair.

S&F in repair hand shower (Health faucet) 1 Mtr PVC tube with wall hook (CP) complete all as specified and directed.

S&F Brass CP wash basin mixer for mixing hot & cold water scrwed down for iron pipe and 15 mm bore fixed in repair.(make : Jaguar and equivalent)

S&F 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F 15mm bore stop valves, cast copper alloy, fancy type, chromium plated (angle type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm including fittings.

S&F in repairs Vitreous China bowl urinal half stall size (60 cm x 39.5 cm x 36.5 cm) white with grating and urinal spreader and union and discharge pipe complete all as specifed and directed

S&F waste fittings,brass,chromium plated 40 mm dia for urinals

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks.

M&L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with old size bricks.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

M&L for rendering 15 mm thick cement plaster on than fair faces of brick work or concrete surfaces in CM 1:4 rendering is to be finished even and smooth without using extra cement.

M&L for rendering 10 mm thick (1: 6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of primer on surfaces of walls.

M&L for preparing surface and applying two coats of white wash on new plastered surfaces.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

S&F steel work in tublar purlins ,post, rafter including necessary cutting welding etc complete

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

Dismantling wall and ceiling boards( Fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified & directed.

S&F interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F non asbestos cement building board 4mm thick of make E board classic of M/s Everest industries Ltd or equivalent make as approved, “in ceiling fixed with screw as per manufacturer instruction”

M & L for providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturer's instructions. Note: Frame work for ceiling shall be measured and paid seperately.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. And removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

M&L for rendering 15mm thick in cement mortar (1:4) or fair faces of concrete surfaces smooth finished (without using extra cement).

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

Dismantaling water tanks and removing to store exc 500 but n. exc 1000 ltrs

Disconnecting existing tanks, exc 500 & n exc 1000 setting aside (or lowering if required), cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position all as specified and directedin SSR Pt I

S & F ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms).

Fixing only in repair ball valves any bore or size.

S&F in repairs Gun-metal, globe or gate valves, 20 mm bore with iron wheel head, screwed both ends for iron pipe and fixed

Fixing only gate valves 15-20 mm bore dia of pipe.

Taking up or down steel tubing and connections 15mm bore.

Taking up or down steel tubing and connections 20mm bore.

Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.)

Refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.)

S&F 15 mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

S&F 20 mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

M&L for providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.

M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. As under (a) Applying bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) A coat of hot blown type bitumen of grade 85/25, applied hot @ 1.25 kg/sqm (c) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (d) Painting the exposed APP membrane surface with bituminous paint @ 0.15kg/sqm

S&F wall mixture CP for mixing hot and cold water for iron pipe and 15 mm bore fixed in repair including telephonic shower and stand of the same (Make - Jaquar or equivalent)

Repairing broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged / disintegrated portion of edges (cross sectional area n. exc 150 Sqcm) and making good with cement mortar 1:4 or cement concrete 1 : 1½ : 3 type A0 and chicken wire mesh with nails (to hold fresh mortar / concrete) including necessary formwork etc and scaffolding for work upto four storied buildings and finishing the surfaces by white wash or cement base paint to match the surface with existing work.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet Mangalore tiles pattern 0.50 mm thick of any colour having tensile strength of 550 MPA as in ridges, hips, valley gutter, drip and straight flashing.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS 33,754.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

UNITED ENTERPRISES

M/S MK Nair

SHILPVED

M/S SAMEER SUBHASH PATANI

M/S K. K. Construction

Vishal Constructions

NIKAASH INFRACON

Bidder Name

Vishal Constructions

M/S SAMEER SUBHASH PATANI

M/S K. K. Construction

UNITED ENTERPRISES

M/S MK Nair

NIKAASH INFRACON

SHILPVED

Srujan Associates