SPECIAL REPAIR TO OTM BLDG NOT-9 AND T9A (RECTS LIVING) OF TB-III LOCATION IN MEG AND CENTRE UNDER GE NORTH BANGALORE

Amount

Demolition of cement concrete and paving not exc 15 cm thick including tiling in ground/first floor etc complete all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed.

Cement concrete Type B0, 1:2:4 , (12.5mm graded aggregate) as in sub base of floor finished fair and even complete all as directed.

Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, Brushing with neat cement slurry with 3.0kg of cement per square metre, complete all as directed.

Non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as directed.

Matt finish ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as directed.

Glazed ceramic tiles in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 etc complete all as directed.

Demolition stone slab and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as directed.

Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 20mm thick screed bed of CM1:4 including rubbing and polishing complete all as directed.

Machine cut kota stone slab flooring 16-18mm thick Iover tread of steps, skirting, dado and pillar etc,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 10mm thick rendering of CM 1:4 including rubbing and polishing complete all as directed.

Granite(of any type) slabs 18-20 mm thick (table rubbed mirror polished) of single size of slab not less than 1.20m length Machine cut, mirror polished with edge rounded one side laid over 15mm thick cement mortar 1:6 screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling etc and hacking out joints hacking for key scrubbing down with water etc. complete all as directed.

Rendering on stone/brick masonry surfaces of 15mm thick in CM 1:4, finished even and smooth without using extra cement complete all as directed.

Rendering 15mm thick on other than fair surface of brick work/stone masonry in CM 1:6 finished even and smooth without using extra cement complete all as directed.

Rendering 5 mm thick on surface of brick work/concrete surface in CM 1:3 finished even and smooth without using extra cement on ceiling surfaces complete all as directed

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over alkali resistant primer over a coat of wall putty minimum thickness 1mm on walls complete all as directed.

Preparation of new plastered surfaces of walls and applying two coats of antifungal weather proof grade exterior acrylic emulsion paint of approved tint over coat of weather proof primer over a coat of wall acre putty minimum thickness 1 mm including filling the crack filling material all as per manufacturer’s instructions complete all as directed.

Preparation of new plastered surface on ceiling and applying three coats white wash complete all as directed.

Preparation of new plastered surface on wall and applying three coats of white wash complete all as directed.

Demolition of brick work /stone masonry built in cement mortar of any description complete all as directed.

Precast cement Concrete block masonry with solid blocks grade C-5 , exc 10cm in width and setting in cement mortar 1:4 complete all as directed.

Brick work with sub class B bricks (designation 75) straight or curved on plan to any radius in half brick wall built in CM 1:4 complete all as directed.

Taking down chowkat (without taking of shutter from the frame) not exceeding 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 complete all as directed..

All as per item 24 hereinbefore but exceeding 1.5 sqm and not exceeding 4 sqm each complete all as directed.

Pressed steel frames of size 125 x 60mm for doors with one or more rebates(02 rebates) including necessary fixing lugs, hinges, lock strike plate etc, complete all as directed.

35mm thick plain framed (Factory made) pannelled shutters (two panel) of 2nd class HW with lock rail and panels of 9mm thick commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as directed.

35mm thick glazed and skeleton shutters of 2nd class hard wood open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR Part-I section 8, clause 8.24(a) all as specified complete all as directed.

Aluminium anodised barrel tower bolt 200 mm long of extruded section and fixed complete all as directed.

Aluminium alloy , anodised sliding door bolt 300 mm long with hasp staple (bolt type) and fixing clip of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy and fixed complete all as directed.

Extruded aluminium alloy handles, fabricated type anodised 150 mm complete all as directed.

Steel window with box type frame(80x60x12.5mm profile sheet for frame) with box type shutter inside glazed shutter and outside gauged shutter with steel handle, telescopic pegs stay complete with glazing bars and 08 nos of 10x10 mm square guard bars in equal spacing, dovetailed or welded as per TD Drg no 539 of HQ CE Chennai Zone including one coat of red oxide primer complete all as directed. Note: PCC in frame, glass pane and wire mesh shall be measured and paid seperately

Sheet glass 4mm thick ordinary quality and glazing with oil putty/beading in square not exceeding 0.5 Sqm in each pane complete all as directed.

Sheet glass 4mm thick ordinary quality, sheet glass frosted on one side and glazing with oil putty/beading in square not exceeding 0.5 Sqm in each pane complete all as directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed.

Providing cement concrete type B0, 1:2:4(12.5 mm graded stone aggregate) for filling of pressed steel frame complete all as directed.

Cutting holes in brick walls (depth of embedded portion of hold fast exceeding half brick and not exceeding one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as directed.

Drapery rod of high strength aluminium rod powder coated (Coating Minimum 40 micron) of outer dia 28mm and inner dia 24.5mm with 2 nos brackets(projected type/wall to wall),finials and rings (8 rings per Meter) complete all as directed. Make: Sleek line type-II of Mac or Soffio-II of Vista Levolor or equivalent of MAC-Decor/Deco window/Jayesh metal corpn.

Dismantling of AC sheet in roof coverings complete all as directed.

Pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.6mm thick (TCT) of any colour(150 Gsm) having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as directed.

Pre-painted galvalume aluminium zinc coating plain steel sheet 0.6mm thick (TCT)of any colour(150 Gsm) having tensile strength of 550 Mpa as in ridges of building fixed with self tapping screws complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Fixing only rolled mild steel as in roof trusses (framed/unframed) purlins, rafter, trusses, rails and wind tie etc (Tee, Angle, channel or flat sections) incl distance pieces etc of grade Fe 410-W complete all as directed. ( Note : Dismantled steel received through Sl item No 42 shall be incorporated in this item)

Rolled mild steel as in roof trusses (framed/unframed) purlins, rafter, trusses, rails and wind tie etc (Tee, Angle, channel or flat sections) incl distance pieces etc of grade Fe 410-W complete all as directed.

Dismantling of Wall and ceiling boards or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.

False ceiling with GI snap grid frame work of size 595mm x 595mm in true horizontal level suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanised @ 170gsm/sqm and bottom exposed width prefinished with leaked polyester paint) consisting of main 'T' runners with suitably spaced joints to get required length and size 38X24X0.3mm spaced at 1200mm centre to centre and cross 'T' of size 24X25X0.3mm 1200mm long spaced between main 'T' at 600mm centre to centre to from a grid of 1200X600mm and secondary cross 'T' of length 600mm and size 24X21X0.3mm to be interlocked at middle of the 1200X600mm panel to form grid of 600mm X 600mm and wall angle of size 21X21X0.3mm and laying false ceiling designer tiles of 4mmm thick fiber cement building board, non asbestos (minimum weight 4.8kg/sqm) fixed or laid/inserted to GI form work with screws/clips for false ceiling work incl, wherever required, cutting/making, opening for services like diffusers, grills, light fittings, fixture and smoke detectors etc.

Main 'T' runners shall be suspended from ceiling using GI slotted cleats of size 25X35X1.6mm fixed to ceiling with 6mm dia and 50mm long metal dash fastner,4mm GI rods with galvanised steel leveling clips spaced at 1200mm centre to centre along main 'T' section (false ceiling system shall be capable to bear distributed load of minimum 15kg/sqm complete all as directed. Make : (i) Snap Grid system - Everest/Gypsum India/Armstrong (ii)Designer Tile - Ivory textures of Everest designers ceiling or equivalent of gypsum India/Armstrong

Preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Preparation of old steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint over existing treatment complete all as directed.

Preparation of new wood surfaces exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as directed.

20 mm Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as directed.

Bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore (ISI marked) fixed in repairs complete all as directed.

Bib tap PTMT fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore (ISI marked) fixed in repairs complete all as directed.

Angle Stop valve 15mm bore, PTMT screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as directed.

PVC connection 15mm size with PTMT nuts on both ends of length 600mm in repairs complete all as directed.

PTMT shelf 600mm long fixed with chromium plated brass screws and wooden/plastic cleats fixed in repairs complete all as directed. Make : (Cat part No 190+B124 of Prayag or equivalent Shakti/ polytuff)

Solid PVC door frame of size 50mm x 47mm made out of 5mm plaint colour PVC sheet reinforced with MS square tube, and fitted in opening complete all as directed.

Factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick (style) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site complete all as directed.

Aluminium anodised Tower bolt 150mm size complete all as directed.

Aluminium anodised Butt hinges 100 mm long complete all as directed.

Aluminium handle 150 mm fabricated type anodized complete all as directed.

Vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc of incl plastic EWC seat cover, coloured closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device and PVC valve less, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle 10 liters capacity incl brackets, PVC connection 15mm dia & PTMT stop valve fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed as in repairs complete all as directed.

Urinal, flat back size of 465 x 355 x 265 mm white with grating and union for discharge pipe including connections to flushing pipe and waste pipes fixed in repairs complete all as directed.

Push tap any colour of PTMT screwed for iron pipe and fixed (minimum weight 15mm-47gms) in repair complete all as directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor., fixed in repairs complete all as directed.

10 litre capacity PVC valve less symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, fixed in repairs, complete all as directed..

Dismantling boarding of any description , fixed in any position with nails complete all as directed.

Plywood 18 to 20mm thick, grade BWR, fixed with screws to timber frame work complete all as directed.

0.9mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as directed.

Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as directed.

Continuous (piano) hinges30mm flap width , mild steel, bright finish or electro galvanised complete all as directed.

18/20 mm wide edge bands 0.9mm thick laminated material (matching with decorative laminate type-I as per iten No 69) on edges of shutter complete all as directed..

2000 (Ltrs) capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old water tank of any description fixed in repair complete all as directed.

Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore, fixed in repairs, complete all as directed.

15mm dia CP brass stop cock screwed down high pressure fancy type with long shank and cup concealed type complete all as directed.

15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as directed.

Steel ventilator with top hung shutter(half fixed) including hinges, steel peg stay, complete with glazing bars and 10 x 10 mm square guard bars in equal spacing, dovetailed or welded as per TD Drg no 539 of HQ CE Chennai Zone including one coat of red oxide primer complete all as directed. Note: PCC in frame, glass pane and wire mesh shall be measured and paid seperately all as directed. (Note :- PCC in frame, glass pane & wire mesh to be paid separately under relevant items)

Soap dish fancy type of PTMT complete all as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation,erection of pole etc or for shafts, wells, cesspits, manholes, pier holes,laying of cables,laying of pipeline etc, not exceeding 10sqm on plan and not exceeding 1.5m depth and getting out in hard/dense soil complete all as directed.

Excavation in trenches in hard/ dense soil n.exc 1.5m wide but exc 1.5m n.exc 3m depth for pole foundation etc complete all as directed.

Demolition and breaking up drain pipes of dia 100/150 mm (Salt glazed ware, AC UPVC or Reinforced concrete) set in cement mortar complete all as directed.

Reinforced cement concrete pipes, class NP3 laid in trenches and jointed complete with collar 150mm dia complete all as directed.

Cement concrete 1:3:6 type C2 bed to drain pipes including packing under and haunching against size of pipes 150mm dia after they are and tested complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil complete all as directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed.

Taking Down PVC SWR Pipes any description and any Size complete all as directed.

110mm bore PVC SWR pipe single socket in any length with rubber ring joints laid in trenches or in floors complete all as directed.

75mm PVC SWR pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as directed.

110mm bore PVC SWR pipe single socket in any length with rubber ring joints fixed to walls complete all as directed.

75mm bore PVC SWR pipe single socket in any length with rubber ring joints fixed to walls complete all as directed.

110 mm dia PVC (SWR) Branch piece, double (double Y) equal or unequal with access door complete all as directed.

75mm dia PVC (SWR) Branch piece, double (double Y) equal or unequal with access door complete all as directed.

Gully trap 125/110mm setting and jointing with solvent cement fixed in repairs complete all as directed.

Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe- 290 Gde-E-165 complete all as directed.

Plain mild steel wire 4 mm dia , galvanised class 3, in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. including straining and fixing to wood, concrete or steel posts and/or straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all as directed. (each line of wire to be measured)

Bolt hooks fixing to wall by rag bolt or welded to windows for mosquito net tying including painting and point filling complete all as directed. (Sample may be seen in GE office).

Hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.Ms flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as directed. (Sample may be seen in GE office).

Vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection Pillars taps fancy type cast copper alloy fancy type, Stop valve fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia as in repair complete all as directed.

Kitchen sink made of stainless steel 1mm thick with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets or fixing in granite slab and connecting union to pipe overall size 495mm x 420mm bowl size 410mmx 330mm x 160mm complete all as directed.

75mm bore PVC (SWR) bends with access door complete all as directed.

110mm bore PVC (SWR) bends with access door complete all as directed.

110 mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as directed.

PVC (SWR) floor trap,, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as directed.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing complete all as directed.

Taking up or down steel tubing 20 mm dia and connections including cleaning for refixing complete all as directed.

20 mm dia CPVC pipes SDR 11 & Plain CI'VC SDR 11 fittings on walls/ ceiling or laying in floors complete all as directed.

25 mm dia CPVC pipes SDR 11 & Plain CI'VC SDR 11 fittings on walls/ ceiling or laying in floors complete all as directed.

CP health faucet for pedestal pattern water closet with CP flexible pipe length 1.2cm complete all as directed. Make : Prayag/ Hindware/ Jaquar

Precast reinforcement cement concrete type B-1, 1:2:4 (using 20 mm graded aggregate ) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as directed.

10 mm dia and over mild steel TMT bars, cut to length, bent to shape required cranking bending and binding with and including mild steel wire annealed not less than 0.90 mm dia. complete all as directed.

All as specified in item No 110 hereinbefore but 8 mm dia deformed bars as in stirrups/ spacers complete all as directed.

Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints filled with mastic complete all as directed.

Sand filling under floor or in foundation including watering and consolidation complete all as directed.

Machine pressed rubber finished coloured interlocking PCC paver block conforming to IS-15658 of 60mm thickness M-35 Grade with grey cement pigment complete all as directed.

Providing and laying water proofing treatment to sunken portion of WCs, bathroom and kitchen etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating including demolition and removal the same from site of existing treatment of any type. The following procedures to be adopted during the execution of work :-(i) Demolition of existing treatment of any type including cleaning and removal of debris from site. (ii) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (iii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iv) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturer’s instructions above the treated area. (v) Ponding the treated portion at least 48 hours. if any leakage/seepage observed the entire procedures will be repeated without any extra cost.

(vi) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (vii) Sunken portion shall be filled with lean concrete 1:5:10 type E-2(using 40mm graded stone aggregate). Make for compound:Pedelite/Sika/STP/as given in T1 5/2003 Note :- (i) The sunken slab sloped towards outer face so as the drain the water to GI Spout pipe. (ii) Coving shall be provided at the junction of slab with the wall. (iii) Nahni trap shall be 10mm below finished floor level. Ensure the drain of pipe dia is larger than the nahni trap size. (iv) The outer end of the spout should be chamfered.

Mild steel 300 mm ordinary rat rail rod pattern springs including rollers and roller plate complete all as directed.

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as directed.

Wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conforming to IS 694 drawn through and including non metallic rigid PVC conduit including accessories concealed in walls including MS terminal boxes fabricated with 1.6mm thick MS sheet concealed in walls with plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators etc including 1.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as directed for following:-

one light point controlled by one switch.

One fan point controlled by one 5 Amps switches/regulator.

One 3 pin socket point 5 Amps on independent board.

One 3 pin socket out let 5 Amps on same board.

One Light point controlled by two 2 -way switches

Wiring complete with 2.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conforming to IS 694 drawn through and including non metallic rigid PVC conduit including accessories concealed in walls including MS terminal boxes fabricated with 1.6mm thick MS sheet concealed in walls with plastic laminated sheet top cover 3mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, including 2.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as directed.

Note for Item No 118 & 119 :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box and laminated sheet is included in the item rate quoted for point wiring.

Wall mounted LED batten 1x20W 4 feet extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver light fitting, complete with all accessories internally pre-wired & including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as directed. Make:-Havells cat part No LHEWEBP7PV1E020 or Bajaj Cat part No.BCLAB20W WH or equivalent model of Polycab/Wipro/Bajaj/Jaquar

Angle holder PVC/polycarbonate with back plate suitable for batten fittings complete all as directed.

Switch piano , flush type single pole, 5 Amps one way complete all as directed.

Switch socket outlet 3/2 pin 5 Amps flush type fixed in repaiirs complete all as directed.

Switch socket combination 2in1, 3 pin 5 and 15 Amps flush type fixed in repairs complete all as directed.

MCB single pole 240 volts 5 to 20 Amps (Curve-C) complete all as directed. Note : Rating of MCB shall be decided by Engr-in-charge.

MCB single pole and neutral 240 volts 32Amps (Curve-C) complete all as directed.

RCBO Four pole 100mA, 415 volts 63 Amps for earth leakage , overload and short circuit protection complete all as directed.

Ceiling rose surface type Bakelite of size 65 x 50 mm, 2 to 3 terminals complete all as directed

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including test point complete all as directed.

Removing of unserviceable ceiling fan/ Exhaust fan and cleaning servicing, changing of bearing, rubber bush nut bolts and writing of MES/SL no, painting and refixing complete all as directed.

Stepped type electronic fan regulator flush type, complete all as directed

Sub main wiring 1100 volts grade multistranded PVC insulated FRLS copper conductors two runs of single core 6 sqmm along with 6 sqmm PVC insulated FRLS single core multistranded copper conductor cable as earth continuity conductor run along in concealed PVC conduit including taking down old submain wiring complete all as directed.

False ceiling light fitting LED 18 watts ,6500 k ,230 Volts, 154 mm dia recess mounted round panel with aluminium die cast housing type including electric connections as in repair compiete all as directed. Make:- jaquar cat part No LNEP01R018XC or equivalent model of Havells/Wipro/Bajaj/Philips

MCB DB SPN 8 way double door with Acrylic Window 240 volts with 200 Amps rated bus bar for housing MCBs compete all as directed.

MCB DB TPN 4 way double door 415 volts with 200 Amps rated bus bar for housing MCBs compete all as directed.

Switch piano flush type single pole two way 5Amps compete all as directed.

1x 45W LED bldg Security light made up of pressure die cast housing with toughened glass and including high power LED's with secondary optics IP 66 protection and impact resistance Make:-Polycab cat part No.PUB0506028 or equivalent model of Havells/ Wipro/Bajaj/ Jaquar compete all as directed.

Removing the existing old GI bracket and provision of new GI bracket made out of 25 mm dia GI tubing light grade of approx length 1.5 m size fabricated to a shape including necessary fixing clamps, bolts, nuts & washers all as specified and as directed.

Sand cushioning to underground cable in layers (8 cm before laying the cable and 15 cm after laying the cable in trenches for cable protection complete all as directed.Note : Punned / compacted thickness shall be measured for payment purpose.

Sub class B, with designation 75, burnt clay bricks for cable protection complete all as directed.

Supply, laying, commissioning and testing XLPE cable insulated, screened, PVC bedded, galvanised steel strip or wire armoured power cable (Heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 35 sqmm, 3.5core laid in trenches/ wall/ceiling including taking out the existing unserviceable cable complete all as directed.

GI tubing light grade 40mm with all accessories for cable protection fixed on poles/building of laid in trenches including necessary MS clamps, bolts and nuts complete all as directed.

Plain cement concrete 1:3:6 type C1 with 20mm graded stone aggregate for coping of pole, filling in mass concrete of pole, make good to road surfac , hard standing etc including necessary form work complete all as directed.

Excavation in trenches, exceeding 1.5m wide and not exceeding 3.0m in depth for pole foundation, etc complete all as directed.

Supplu and Laying and testing of GI pipe medium grade 40mm dia including accessories such as bends, Elbow, Tee, short lengths , socket, Union, Nipples and removing of unserviceable pipe complete all as directed.

Supply and Laying and testing of GI pipe medium grade 25mm dia including accessories such as bends, Elbow, Tee, short lengths , socket, Union, Nipples and removing of unserviceable pipe complete all as directed.

Gun metal gate valve 40mm dia with iron wheel head screwed both ends for iron pipe including emoving of unserviceable Gate valve all as directed.

Gun metal gate valve 25mm dia with iron wheel head screwed both ends for iron pipe including emoving of unserviceable Gate valve complete all as directed.

Float valves high pressure with polythene float and fly nut complete screwed for iron pipe of size 25mm dia including emoving of unserviceable float valvecomplete all as directed.

Drilling and tapping cast iron/GI water main (in position) for branch connection of the internal dia 25mm dia complete all as directed.

K T ASSOCIATES

M/s SRINIVASA CONSTRUCTION COMPANY

M.VENKATARAMANAPPA AND COMPANY

N RAJEGOWDA and CO

Phoenix Infra

M/SLAXMI VENKATEHWARA CONSTRRUCTION

ABHISHEK CONSTRUCTIONS