PROVISION OF RCC RETAINING WALL FOR BOUNDARY WALL AT TRV ICGAS DAMAN

Amount

Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil.

Excavating over areas, n exc 1.5 deep and getting out in soft/disintigrated rocks complete all as directed.

Excavating over areas, exc 1.5m & upto 3m deep and getting out in soft/disintigrated rocks complete all as directed.

Excavating over areas, exc 3m & upto 4.5m deep and getting out in soft/disintigrated rocks complete all as directed.

Excavating over areas, exc 4.5m & upto 6m deep and getting out in soft/disintigrated rocks complete all as directed.

Excavating over areas, exc 6m & upto 7.5m deep and getting out in soft/disintigrated rocks complete all as directed.

Excavating over areas, exc 7.5m & upto 9m deep and getting out in soft/disintigrated rocks complete all as directed.

Excavating over areas, exc 9m & upto 10.5 deep and getting out in soft/disintigrated rocks complete all as directed.

Excavating over areas, exc 10.5m & upto 12m deep and getting out in soft/disintigrated rocks complete all as directed.

Excavating over areas, exc 12m and n exc 13.5m deep and getting out in hard rocks by use of mechanical plant or chisel cutting complete all as specifed.

Excavating over areas, exc 13.50m and n exc 15 m deep and getting out in hard rocks by use of mechanical plant or chisel cutting complete all as specifed.

M & L for cement concrete 1:2:4 type B-2 using 40 mm graded broken stone aggregate as in foundations, filling and mass concrete including use of formwork as required

M & L for use and waste form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter- for flat fair finished surfaces of concrete

M & L for use and waste of form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished surfaces

M & L for providing reinforced cement concrete design mix M-30 using 20 mm graded broken granite/trap/basalt stone aggregate as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete

M & L for providing reinforced cement concrete design mix M-30 using 20 mm graded broken granite/trap/basalt stone aggregate as in retaining walls, basement walls, ballast walls and the like any thickness above top of footings including attached pilasters and buttresses

M & L for Mild steel CRSTMT bars 10mm dia (using Fe-500D) and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for Mild steel CRS TMT bars 5mm dia and over upto and including 10 mm dia as in stirrups spacers and binders. and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M & L for loose filling of coarse aggregate (40 to 80 mm gauge graded broken stone) in backfill of retaining wall.

M & L 100 mm thick Sand filling under floors or in foundation or in filter bed at weep holes including watering and consolidation

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm of soft/disintigrated rocks complete all as specified.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering

Removing excavated material (soft/rocks of any description) exc. 1.50 km but n exc. 5 km to outside of Defence land.

M & L for 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors (placed/inserted in RCC as in weep holes of retaining walls)

Demolition of brick work built in cement mortar incl all quoins, arches, pillars, etc complete all as specified.

Demolition of Concrete of any description and in any position not otherwise specifically provided for, if cement concrete is reinforced (reinforcement cutas required to facilitate demolition) complete all as specified and as directed including reomoval of debrises exc 50m not exc 1.50KM.

Dismantling of old barbed wire and making rolls including stacking neatly complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bar or grating complete all as specified.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m deep for foundation etc and getting out in hard and dense soil.

M&L Cement concrete 1:4:8 type D-2 using 40 mm graded stone agg as in foundation filling and mass concrete.

M&L Reinforced Cement concrete M-30 (Design mix) using 20 mm graded stone agg as in beam, cantilever, lintels over 1.5 M span.

M&L Reinforced Cement concrete M-30 (Design Mix) using 20 mm graded stone agg as in columns, pillers, piers posts and strut complete all as specified and directed.

Use and waste of Form work to sides of concrete foundations, footing, bases of columns, raft and raft beam, sides and soffits of foundation and plinth beam and similar work for rough finished surface.

Use and waste of Form work to sides of pillers, posts, piers, columns square, rectangular or polygonal for rough finished surface of concrete.

Use and waste of Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20cm wide and sides of RCC/PCC bands in walls, horizontalor sloping and similar work exc 10cm but n. exc 20cm wide.

M&L solid block masonry using solid blocks made of PCC 1:3:6 type C1 (using 20mm graded aggregate) set in CM 1:6

M&L for 15 mm thick rendering on fair faces of concrete surface finished even and smooth without using extra cement in CM 1:4.

S&F Mild steel work conforming to Fe 290 Gde E as in angle iron posts with swan neck (horn) and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc necessary drilling, bolting or welding/riveting etc.

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia, barbs at 75mm spacing as in fencing and straining and fixing to any type of standard rails/ straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete as specified and directed (each line of wire to be measured separately).

M&l for preparation of newly plastered surface of wall and applying two coat of cement base paint over a alkali resistant primer

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth, priming with a coat of red oxide primer and applying two coats of synthetic enamel paint.

M&L for preparation of surfaces of any description wood/steel, iron etc exc 10cm in width or girth and applying one coat of black bituminous paint on embedded steel post portion.

Returning filling in including spreading levelling watering and well ramming in layers n. exe 25 cm of any type of soil.

Removing excavated material n. exe 50 M and depositing where directed at a level n. exe 1.5 M above ground level.

S & F concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, spring core wire (2.5 mm thick)of high tensile strength of 165kg/sq mm with tape (0.52mm thick) and weight 43.478 gm/metre and fixing the same with Y-shape angle iron with 6 horizontal barbed wire, stud tied with G.I.staple sand G.I.clips to retain horizontal, including necessary bolts , all complete as per direction. Note-1) Total height of boundary wall including concertina coil fencing will be about 3m from ground level. 2) Cost of MS angle (Yshaped) and barbed wire shall be measured and paid seperately.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, including removal of debrises complete all as specified

M&L for 150 mm thick hardcore broken stone boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface (below or above ground level) complete all as specified and directed.

M&L for Polythene film, 125 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 Kg per Sqm.

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified.

M&L for 150 mm thick PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in base for pavments/concrete roads laid in bays including finishing the concrete with spike rolling to surface making impressions of expended metal, whilst the concrete is green complete all as specified.

Forming construction joint (Dummy ) 65mm deep x 10 mm wide and sealed with sealing compound Grade 'A' complete all as specified.

Taking down carefully existing unserviceable Street light fitting 1X36 FTL, 2X36 FTL, 2X18 FTL, 150/250/400 watt CFL/HP/SV watt from existing location complete all as specified and directed.

Supply and fix LED street light fitting 36 watts, made in pressure diecast housing with epoxy powder coated dark graphite grey colour finish prismaticpolycarbonate cover with individual LED lenses with IP 66 complete with all accessories and necessary fixing arrangement on pole/wall at any height including 3 core 0.5 sqmm copper conductor flexible cable from connector to fitting complete all as specified and directed. Make:- Halonix model No HLSLD-16-36-CWL or equivalent make in Havells/CG/Phillips.

Supply and fix GI bracket pipe of size 40mm dia medium grade of 1.5 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of street light fittings of any type and the GI bracket pipe shall be fixed on wall/pole surfaces by providing suitable MS flat iron 32X6 mm clamps 2 nos of 25cm long duly to the bracket pipe and fixing with necessary suitable nuts, bolts and washers including painting the GI bracket and MS flat iron clamps with one coat of red oxide primer and two coats of white colour synthetic enamel paint and removing of old unserviceable item complete all as specified and directed.

Supply and fix FRP looping box 3 pole type with hinged doors and cable entryholes at bottom for incoming and outgoing cables including MCB SP 6 Amps 10 KA "C" series 240 volts and fixing arrangement on pole/wall by providing mild steel flat iron clamps of size 32X6mm-02 Nos duly painted with two coat of synthetic enamel over a red oxide primer with necessary nuts, bolts and washers and including taking out old unserviceable item complete all as specified and directed. Make of FRP looping box: National/Sintex. Make of MCB: Havells/L&T/Schneider.

Supply and fix along wall/through pipes etc, testing and commisioning LT cable,XLPE insulated, galvanized steel strip armoured, 1100 volts grade with multistranded aluminium conductor of cross sectional area 6 sqmm, 4 core including making cable connections by providing necessary aluminium lugs duly crimped properly and stainless steel glands, nuts, bolts, washers and saddles etc including disconnecting and taking out the old unserviceable cable complete in all respects, as specified and directed. Make:- Havells/Polycab/Finolex.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium served with inner sheathing of PVC tape and overall PVC sheathed of size 4sqmm 2 core flat or round laid through conduits/pipes/walls/along poles with necessary fixing arrangements by providing saddles and making cable connections at light fitting end and in looping box and testing including disconnecting and taking out the old unserviceable cable complete all as specified and directed. Make:- Havells/Polycab/Finolex.

Modern Engineering Co

JAY BHARAT ROADLINES