Loading
Loading…
Loading…
Tender Value
₹31.2 L
EMD Value
₹62,477
Closing Date
30 Sept 2026, 4:00 pm3d left
Fire Officer
Office of the Fire Officer, Mezzanine Floor, Palika Kendra, Sansad Marg, New Delhi - 110001
Sub Head - Repairing and maintenance of fire fighting system, Fire Alarm system and Fire Check doors of AAV East Kidwai nagar, East Kidwai nagar barat ghar and East Kidwai nagar market.
2026_NDMC_298746_1
12/2026-27
Open Tender
Miscellaneous Works
Works
120 days
NDMC Buildings
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹62,477
21 Sept 2026
21 Sept 2026
30 Sept 2026
21 Sept 2026
30 Sept 2026
21 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Steel Work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat cost of approved steel primer using structural steel etc. as reqd.
In stringers, treads, landing etc of stair cases, including use of chequered plate wherever required, all complete as specified | 800 | Kilogram | 125.1 | ₹1,00,080 |
| 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5 x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 25 | Square Metre | 747.65 | ₹18,691.25 |
| 3Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion | |||||
| 3.01 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | 49 | Kilogram | 537.4 | ₹26,332.6 |
| 4For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | |||||
| 4.01 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | 52 | Kilogram | 642.2 | ₹33,394.4 |
| 5Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||||
| 5.01 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | 6 | Square Metre | 1,523.65 | ₹9,141.9 |
| 6Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. | |||||
| 6.01 | Powder coated minimum thickness 50 micron aluminium tubular handle bar | 3 | Nos. | 639.25 | ₹1,917.75 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.30 MB
BOQ_398473.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .