WELCOME MAINT AND CERTAIN MISC BR AND EM WORKS MD OFFRS AND CLEANING INCL REPAIRS OF OVERHEAD TANKS AT MIL STN KALUCHAK UNDER GE KALUCHAK

Amount

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Dismantling of water tank exc. 250 Litre but not exc. 500 Litre capacity complete all as specified and directed.

M & L for providing plain cement concrete type B-0, 1:3:6, (using 12.50 mm graded stone aggregate), as in filling of pressed steel door frames/chowkats complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 20 cm in girth complete all as specified and directed.

S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

M&L for 2nd class soft wood (Kail) plain, solid, straight chowkats/frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, with one or more rebates, complete all specified

S & F of 35mm thick 2nd class hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified and directed.

S & F of 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed.

S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F in repair 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed in repair complete all as specified and directed.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F of 30 mm wide flap when open, mild steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed.

S & F of 150 mm long anodised aluminium handle, cast type complete all as specified and directed.

S & F of 125 mm long anodised aluminium handle, cast type complete all as specified and directed.

S & F of 150 mm long anodised aluminium handle, cast type, fixed in repair complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F in repair 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F of 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F of door cill for panelled or glazed/gauzed shutter, fixed at bottom with screws, complete all as specifed & directed.

S & F of Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staplescomplete all as specified and directed.

S & F of Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed in repair with tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F of 300 mm mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

S & F of 75 mm size aluminium anodised Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F of 140 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F in repair drapery fancy type curtain rod shall be 20 mm dia of aluminium pipe with powder coating with wooden finish including bracket rings etc including all fixing arrangement complete all as specified and directed.

S & F of mild steel framed work such as gate grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F of pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. NOTE : PCC for filling of hollow portion shall be measured and paid for separately.

S & F of pressed steel frames of size 105 mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. NOTE : PCC for filling of hollow portion shall be measured and paid for separately.

S&F of aluminium anodised door frame with shutter comprising of aluminium door frame of rectangular tube of size 101.60x44.75x2.4mm thick, aluminium glazed and skelton shutter with bottom rail of size 105x44.45x2.20mm thick lock rail of size 150x44.5x3.00mm thick, 5.5mm thick glass with solar control film 25 micron reflective type sticked to glass dixed in shutter including necessary rubber packing/gasket, aluminium clips/beading of 0.9mm thick, locking arrangment with godrej mortice lock of seven levers, aluminium tower bolts of size 200mm 02 nos, circular aluminium handles of 101.60mm dia and 2.54mm thick 02 Nos, floor spring double action hydrulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty including taking down old unserviceable door frames with shutters, complete all as specified & directed.

S&F of aluminium anodized powder coated (minimum thickness 50 micron) sliding window (three track) consisting of two shutter of glazed and one shutter of flyproof including all necessary fittings, the following items shall be included in quoted rate of this item :- (a) Aluminium powder coated frame of section 100 x 44 mm x 1.5 mm with or without rebate. (b) Aluminium powder coated window shutters of section 40 x 20 mm x 1.5 mm thick (two shutter of glass and one shutter of wiremesh) including self locking catch & roller etc). (c) 4.0 mm thick coloured or tinted glass glazing as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket. (d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples.

S&F of aluminium anodized powder coated (minimum thickness 50 micron) window /ventilator shutter of glazed and including all necessary fittings, the following items shall be included in quoted rate of this item :- (a) Aluminium powder coated frame of section 100 x 44 mm x 1.5 mm with or without rebate. (b) Aluminium powder coated window shutters of section 40 x 20 mm x 1.5 mm thick (two shutter of glass and one shutter of wiremesh) including self locking catch & roller etc). (c) 4.0 mm thick coloured or tinted glass glazing as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket.

S&F anodised aluminium powder coated (not less than 50 micron) designer grill of 5-6mm dia of mesh size 50x50mm centre to centre with 25mm flat as per sample kept in GEs office including aluminium beading, complete all as specified & directed.

M & L for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including 3 mm thick teak wood beading in cup bords/kichen cabinets complete all as specified and directed.

M & L for 18/19mm thick block board, grade 2 quaility, interior grade, commercial type, fixed with screws to timber frame work as in cupboard shutters / shelves etc with lipping (15mm thick 3 side and 20mm thick hinge side) fixed in repairs, complete all as specified & directed.

M & L for 18mm thick PVC Celuka board without lamination of any colour as in kitchen cupboard shutters / shelves etc, fixed in repairs, complete all as specified & directed.

M & L for 18mm thick PVC Celuka board with lamination, glossy finish of any colour as in kitchen cupboard shutters / shelves etc, fixed in repairs, complete all as specified & directed.

M & L for 6mm thick PVC Celuka board without lamination of any colour as in kitchen cupboard shutters / shelves etc, fixed in repairs, complete all as specified & directed.

S&F of rolling sliding channels of size 450mm length, fixed in cupboard with screws for holding stainless steel basket as in drawers, complete all as specified & directed.

S&F of Zero crank hinge of size 150mm, heavy duty, soft closing type as in shutter of cupboards in kitchen, complete all as specified & directed.

S&F of Stainless steel fasteners of size 75mm long steel supports, drilled and fixed to walls, complete all as specified & directed.

S&F of 50 mm dia and 75mm long steel support, fixed at bottom of cupboard box, complete all as specified & directed.

S&F of Stainless steel designer handle (heavy duty) of 100mm size, fixed to drawers or cupboard shutters, complete all as specified & directed.

S&F of Stainless steel designer handle (heavy duty) of 150mm size, fixed to drawers or cupboard shutters, complete all as specified & directed.

S&F of Magnetic catcher, heavy duty, brass body and striking plate, fixed in cupboard shutters, complete all as specified & directed.

S&F of 40mm dia, copboard knobs fixed with nut, screw and washer of mild steel, brass polished, complete all as specified & directed.

S & F for Vitrified light shade Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - SCREED SHALL BE MEASURED AND PAID SEPARATELY.

S & F for Vitrified light shade Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surface of wall such as skirting, dado, riser etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - RENDERING SHALL BE MEASURED AND PAID SEPARATELY.

M & L for 15 to 18 mm thick granite (of any type and shade) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary cutting, grinding, rubbing, polishing rounding to exposed edges and laid over20 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - RENDERING SHALL BE MEASURED AND PAID SEPARATELY.

M & L Non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - SCREED SHALL BE MEASURED AND PAID SEPARATELY.

M & L Non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - SCREED SHALL BE MEASURED AND PAID SEPARATELY.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement)complete all as specified and directed.

M & L for 5 mm thick rendering on fair faces of brick work or concrete surfaces of ceiling with cement mortar 1:3 finished even and smooth (without using extra cement)complete all as specified and directed.

M & L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed.

M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as specified and directed.

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S & F of 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane with oil putty or fixed with beads complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surfaces of walls, cornices etc by brooming down or steel wire brushing down scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coats of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surfaces of ceiling, cornices etc by brooming down or steel wire brushing down scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coats of white wash complete all as specified and directed. NOTE:-The work will be carried out in garages/storage sheda having height upto 10 M

M&L for preparation of old decorated plastered or unplastered surfaces of walls, cornices etc by brooming down or steel wire brushing down scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coats of cement base paint complete all as specified and directed. NOTE:-The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this items

M & L for preparing newly plastered or previously untreated wall ,chajjas, facias,parapets wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coat of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing down scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coats of oil bound distemper complete all as specified and directed. NOTE:-The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this items

M & L for complete removal of old finishes from ceiling by scrapping, rubbing down, with sand paper to have even and smooth surfaces and applying two coats of oil bound distemper over a coat of 1 mm thick birla wall care putty complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing down scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coats of weather proof paint complete all as specified and directed. NOTE:-The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this items

M & L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and providing complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth including knotting and stopping and applying one coat of synthetic enamel paint (any tint/Shade) complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed

S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S & F of 1000 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S & F in repair plastic water tank cover approx 800 gms wt for 500/1000 Ltrs water storage tank triple layered cylindrical vertical closed top hoisted and fixed in position complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connection, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connection, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm nominal bore of pipe in walls, and ceiling or laid in floors, jointing and testing galvanised mild steel water tubing “medium grade” with and including all fitting (such as bends, elbows, tees, short pieces connectors, back nuts, diminishing pieces, capas, plugs and union etc) complete all as specified and directed.

S & F in repair 15 mm bore chromium plated,fancy type bib tap, cast copper alloy with capstan heads, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair fancy type angular stop cock with flange, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, externally threaded, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed.

S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F in repair 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F in repairs 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F of 125 mm dia stainless steel grating male/female pattern with or without hole ,fixed in nahani/ floor traps complete all as specified and directed.

S & F of chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specified and directed.

S & F in repair 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

S & F repair soap dish brass chromium plated, fancy type fixed to wall rawl plugs and chromium plated brass screws complete all as specified and directed.

S&F glass corner shelf (03 piecs) with bracket fixed with chromium plated brass screws fix to wall with rawl plug and CP screws complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F 15 mm bore angle stop valve cast copper alloy,CP with capstan heads, fancy type any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S & F of 15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair brass CP mixer for mixing hot & cold water screwed down for 15 mm dia bore GI pipe complete all as specified and directed.

S&F of chromium plated wall mixer 3 in 1 system fancy type with provision for both hand shower and overhead shower complete with flange (without Hand & Over Shower ) screwed down for 15 mm bore GI pipe ,etc.complete all as specified and directed.

S&F of toilet paper holder with flap, brass chromium plated, complete all as specified & directed .

S & F in repair 15 mm bore bib tap CP two way with hand shower(Heath faucet, ABS chromium plated) with 8 mm dia, 1 meter long flexible tube & wall hook complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F of stainless steel plate rack of size 900x750x250mm made out of AISI 304 stainless steel 0.63 mm thick having partitions as per sample kept in AGE office including brass/stainless steel screws for fixing of partitions, nuts, bolts, washers and fittings, complete all as specified & directed.

S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (Pedestal pattern) and trap (excluding) fixing bolts,flushing cistern and flush pipe including connection to drain (or outgoing pipe) including plastic seat cover suitable for water closet pedestal pan, coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices with and including brass chromium plated standard quality jet with nozzle 1500 mm long PVC pipe etc complete all as specified and directed complete all as specified and directed.

S & F of vitreous china, wash hand basin, flat back, white of size 580mmx450mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified & directed

S & F in repair polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 with and including 32 mm bore PVC flush pipe of suitable length complete all as specified and directed.

S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F of PVC cabinet made of ABS material of size 450x600mm with glass front, fixed in repairs, complete all as specified & directed

S&F of brass CP waste coupling 32mm dia with long screwed shank and fly nuts for kitchen sink (half or full threaded), fixed in repairs, complete all as specifed & directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall /floor complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall complete all as specified and directed.

S & F of 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repair PVC waste pipe flexible type 32 mm dia suitable for coupling 32 mm ,610 mm long complete all as specified and directed.

S & F in repair 40mm dia PVC waste pipe for kitchen sink, 90cm long, flexiable type, fixed in repairs, complete all as specified & directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

Taking down carefully existing sub main wiring complete of any size and capacity complete all as specified and directed.

Taking down carefully unserviceable main switches, DBs including MCBs etc. complete of any size and capacity complete all as specified and directed.

M&L for point wiring one light / fan/ bell/Exhaust fan point controlled by one way switch(concealed type) complete with multi stranded copper conductor flame retardant low smoke (FRLS) 1.5 Sqmm size PVC insulated unsheathed cable 1100 volts grade drawn through with and incl medium grade duty concealed PVC conduit ISI marked not less than 20mm dia including conduit fittings and accessories such as socket,elbow,junction box, bell mouth,bend, reducer etc complete incl cutting chases in existing walls of any description built in cement mortar and making good the disturbed surfaces in cement mortar (1:4) and finishing the surfaces to match with existing surfaces and finish with using sunken type pressed steel terminal boxes of required sizes of not less than 1.6 mm thick factory made and factory painted with top cover of 3 mm thick plastic laminated sheet fixed with brass screws washers with all accessories including single core multi stranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable green in colour as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified . NOTE :-Wire/Cable colour coding Shall be maintained properly as per IE rule.

All as per item No 121 but for one 3/5 pin socket outlet 5 Amps on the same board with other switches.

All as per item No 121 but for one 3/5 pin 5 Amp socket outlet on independent board.

All as per item No 121 but one light point controlled by two numbers two way switches.

All as per item No 121 above here in before but with 4.0 Sqmm (nominal area) cable PVC insulated but unsheathed for the 15 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor green in colour for earth continuity on independent board complete all as specified and directed.

M&L for point wiring one light / fan/ bell/Exhaust fan point controlled by one way switch(concealed type) complete with multi stranded copper conductor flame retardant low smoke (FRLS) 1.5 Sqmm size PVC insulated unsheathed cable 1100 volts grade drawn through with and including PVC casing and caping 'ISI marked' of 20/30mm size as required, terminated in MS sunken box suitable for housing of switches, socket, regulator etc covered with 3 mm thick plastic laminated sheet fixed with brass screws washers with all accessories including single core multi stranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable green in colour as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified . NOTE :-Wire/Cable colour coding Shall be maintained properly as per IE rule.

All as per item No 126but for one 3/5 pin socket outlet 5 Amps on the same board with other switches.

All as per item No 126 but for one 3/5 pin 5 Amp socket outlet on independent board.

All as per item No 126above here in before but with 4.0 Sqmm (nominal area) cable PVC insulated but unsheathed for the 15 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor green in colour for earth continuity on independent board complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole two way 5 Amps complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

S&F bell push flush type 5 Amps complete all as specified and directed.

S&F Ding Dong musical AC. 230 volts,single pole complete all as specified and directed.

S&F Ceiling rose three teminal /PVC/ polycarbonate, insulated body complete all as specified and directed.

S&F electronic fan regulator, 2 module, 100 watt, (5 stepped type), 240 Volt for 1200/1400 sweep AC ceiling fan complete all as specified and directed.

Supply and fixing in replacement switch piano (flush button type) single pole, one way, 5 Amps complete all as specified and directed.

Supply and fixing in replacement switch piano (flush button type) single pole, one way, 15/16 Amps complete all as specified and directed.

Supply and fixing in replacement switch socket combination 2 in one, 5 pin 5/6 Amps, 240 Volts flush type,complete all as specified and directed.

Supply and fixing in replacement switch socket combination 2 in One , 5/6 pin,5/6/16 Amps flush type complete all as specified and directed.

Supply and fixing in replacement socket out let, 5 pin 5 Amps flush type complete all as specified and directed.

Supply and fixing in replacement switch flush type, 5 Amps, SP, two way complete all as specified and directed.

Supply and fixing in replacement switch bell push flush type 5 Amps complete all as specified and directed.

Supply and fixing in replacement call bell, Ding dong type, AC 230 Volts single pole complete all as specified and directed.

Supply and fixing in replacement ceiling rose polycarbonate type three terminals complete all as specified and directed.

Supply and fixing in replacement step type electronic fan regulator 120 watt single pole 240 Volts complete all as specified.

Supply and fixing in replacement Modular electronic fan regulator 120 watt single pole 240 Volts complete all as specified.

Supply & Fix in replacement of Lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendent fitting complete all as specified and directed.

Supply in replacement plug top, AC 230 Volts, 16 Amps complete all as specified and directed.

Supply in replacement of hylam sheet cover 3 mm thick for fixing switches, sockets, regulators etc of size 4 x 4 (Inches) on existing metal box complete all as specified and directed.

Supply in replacement hylam sheet cover 3 mm thick for fixing switches, sockets, regulators etc of size 7 x 4 (Inches) on existing metal box complete all as specified and directed.

Supply in replacement hylam sheet cover 3 mm thick for fixing switches, sockets, regulators etc of size 8 x 6 (Inches) on existing metal box complete all as specified and directed.

Supply in replacement hylam sheet cover 3 mm thick for fixing switches, sockets, regulators etc of size 10 x 12 (Inches) on existing metal box complete all as specified and directed.

Supply in replacement of PVC conduit medium grade with fittings, ISI marked, 20 mm size complete all as specified and directed.

Supply in replacement of PVC conduit medium grade with fittings, ISI marked, 25 mm size complete all as specified and directed.

Supply in replacement of PVC casing & capping with fittings, ISI marked, 20 mm size complete all as specified and directed.

Supply in replacement of PVC casing & capping with fittings, ISI marked, 25 mm size complete all as specified and directed.

Supply in replacement of PVC switch boards, closed recessed suitable for surfaces, sizes 4 X 4 (Inches) complete all as specified and as directed.

Supply in replacement of PVC switch boards, closed recessed suitable for surfaces, sizes 4 X 7 (Inches) complete all as specified and as directed.

Supply in replacement of PVC switch boards, closed recessed suitable for surfaces, sizes 8 X 6 (Inches) complete all as specified and as directed.

Supply in replacement of PVC switch boards, closed recessed suitable for surfaces, sizes 8 X 10 (Inches) complete all as specified and as directed.

Supply in replacement of PVC insulated copper conductor cable, FRLSH, single core, 1100 Volts, 1.5 Sq mm complete all as specified and directed.

Supply in replacement of PVC insulated copper conductor Cable, FRLSH, single core, 1100 Volts, 2.5 Sq mm complete all as specified and directed.

Supply in replacement of PVC insulated copper conductor Cable, FRLSH, single core, 1100 Volts, 4.0 Sq mm complete all as specified and directed.

Supply in replacement of PVC insulated copper conductor Cable, FRLSH, single core, 1100 Volts, 6.0 Sq mm complete all as specified and directed.

S&F energy efficient LED bulk head luminaire, 1x15 watt, wall mounted made of die cast aluminium with opal diffuser IP-65, LED lamp, lamp holders, etc. complete with all accessories including connecting up with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting 230V, 50 HZ, complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendent complete all as specified and directed.

S&F of fully diffused recessed mounted luminaire 2'X2' LED 36 Watt suitable for POP/Gypsum false ceiling complete with all accessories pre-wired and making connection with three core PVC insulated overall sheathed flexiable copper cable of size 0.75sqmm from ceiling rose to light fitting, complete all as specified & directed.

S&F of LED tubelight fitting 1 x 20W inverter batten type fitting, 4 feet long, aluminium extruded housing, IP-20 rated, voltage 230 volts (operating range 140 volts to 270 volts), 50 Hz, system wattage 20 watt ±10%, system current not less than 102mA, power factor more than 0.95, system lumen efficacy 100 lm/watt CCT 6500K, CRI more than 80, THD less than 30%, driver efficiency more than 85% with all accessories pre-wired and making connection with three core PVC insulated overall sheathed flexiable copper cable of size 0.75sqmm from ceiling rose to light fitting, complete all as specified & directed.

S&F of decorative wall light fixture made up of Polycarbonate, suitable for 9/10 W LED Lamp B22 base. including1 N x 9/10 W LED Lamp complete all as specified & directed.

S&F of decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base.including1 N x 9/10 W LED Lamp complete all as specified & directed.

Supply and fixing in replacement LED luminaires, 20 watts, lumen output not lessthan 2000 (4 feet), made of anodised extruded aluminium housng, wit high transmissivity diffuser, high lumen output, with suitable electronic driver, and operated in single phase, 230 volts, 50HZ, all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable of size 23/0.0076, from conector and ceiling rose, complete all as specified and directed.

S&F in replacement mirror light batten type 1 x 5/6W 230V AC, 50Hz ,Pf >0.98, THD <10% on wall ccomplete all as specified and directed.

Supply and fixing factory made epoxy powder coated distribution board, SPN, 12 ways with metal door (IP-43 protection), confirming to IS : 8623 fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall, suitable for universal mounting including 200 Amp copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts, suitable for one SPN/DP MCB as incomer and SP MCB outgoing, complete all as specified & directed .

Supply and fixing factory made epoxy powder coated distribution board, SPN, 8 ways with metal door (IP-43 protection), confirming to IS : 8623 fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall, suitable for universal mounting including 100 Amp copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts, suitable for one SPN/DP MCB as incomer and SP MCB outgoing, complete all as specified & directed .

Supply and fixing factory made epoxy powder coated distribution board, VTPN, 4 ways with metal door (IP-43 protection), confirming to IS : 8623 fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall, suitable for universal mounting including 200 Amp copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts, suitable for one SPN/DP MCB as incomer and SP MCB outgoing, complete all as specified & directed .

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified & directed.

S&F in replacement of MCCB 63 Amps four pole 415 volts thermal magnetic release ICU=100% ICS having breaking capacity 16 KA including connection terminal strip complete all as specified & directed.

M&L for Isolator DP 32 Amps, 240 volts complete all as specified and directed.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed FRLScable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit and conduit accessories and fittings. including one single core green colour PVC Insulated unsheathed FRLS cable copper conductor multistranded of size 6.0 Sq mm as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

All as per item No 181 above but in PVC surface Cassing N capping complete all as specified and directed.

M & L for submain wiring with two runs of PVC insulated multistranded,FRLSH copper coductor of size 6 Sqmm cable single core 1100 Volts Grade and one run of earth continuity conductor cable of 6 Sq mm strand cable drawn in existing PVC concelled/surface conduite complete all as specified and as directed.

Taking down ceiling fan any type/ size from hook and dismantling cable and blades and bring in to store for repair and hanging ceiling fan in position after repair, greasing etc. with existing flexible copper cable complete all as directed. (rewinding of fan, painting and spare parts required shall be measured and paid separately)

Taking down exhaust fan any type/ size from wall and dismantling sealing cable and dismantling blades and bring in to store for repair and fixing exhaust fan in position after repair, greasing etc. with existing flexible copper cable complete all as directed. (rewinding of fan, painting and spare parts required shall be measured and paid separately)

M&L for rewinding of ceiling fan 1200/1400 mm sweep after dismantlingand taking out the burnt winding coils and rewinding with super enamelled copper winding wire of suitable size and gauge including insulation, Varnishing, drying etc complete and refixing the same after rewinding and testing complete all as specified and directed.

M&L for rewinding of exhaust fan 300 to 450 mm sweep after dismantlingand taking out the burnt winding coils and rewinding with super enamelled copper winding wire of suitable size and gauge including insulation, Varnishing, drying etc complete and refixing the same after rewinding and testing complete all as specified and directed.

Supply and Fixing brass bush for ceiling fan / Exhaust fan as existing size complete all as specified and directed.

Supply and Fixing bearing suitable for ceiling fan 1200mm to 1400mm /exhaust fan of bearing No- 6201/6202 Make-Tata/SKF/NBC complete all as specified and directed.

Supply and fixing capacitor 2.5 MFD for ceiling fan. complete all as specified and directed.

Supply and fixing capacitor 3.15 MFD for ceiling fan complete all as specified and directed.

Supply and fixing capacitor 4.0 MFD for exhaust fan complete all as specified and directed.

Supply and fixing rubber real with bolts, nuts and clamps of suitable for ceiling fan complete all as specified and directed.

S&F PVC insulated flexible copper cable 3 core of size 23/0.0076 complete all as specified and directed.

M&L for painting of ceiling fans with blade complete insitu with synthetic enamelled paint by spraying includingfilling cavities with filler, one coat after cleaning all dust etc all as specified and directed.

Taking down carefully water heater storage type of any capacity from its position for repair/ overhauling by disconnecting complete electric/water supply connections, taking out geyser assembly repairing by minor welding of inner tank re-assembling the geyser and refixing the same by connecting electric / water supply connections and testing complete all as specified and directed. Note: (spares will be measured and paid separately)

Supply and fixing in replacement old u/s element and fixing of new heating element of capacity 1.5/2 KW of any type (as per sample). complete all as specified and directed.

Supply and fixing in replacement old u/s thermostate for geyser and fixing of new thermostate adjustable between 30 degree to 90 degree celcius of any size /type as per existing (ISI marked) complete all as specified and directed.

Supply and fixing in replacement old u/s indicator lamp and fixing of new indicator lamp of suitable capacity including its electrical connection complete all as specified and directed.

Supply and fixing in replacement of PVC connection heavy duty 450mm long with 2 nuts brass at both ends suitable for hot water for GI pipe 15 mm dia complete all as specified and directed.

M&L for MS anchor fastener heavy duty 12mm dia 10 cm long all as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connecting to main switch or switch board complete and incl PCC masonry pit of 300x300x300mm interior dimensions in PCC 1:2:4 type B-1 RCC cover with GI frame, charcoal and common salt 15cm in layers all round the earth plate, 15mm dia GI watering pipe, a funnel with wire mesh should be provided on top of watering pipe complete all as specified as per electric plate No 3 of SSR 2009 including testing after completion complete all as specified and directed.

M/S KAILASH TRADERS (BID ID -3111109)

M/s Anand Prakash (BID ID -3115469)

NARESH KUMAR AND COMPANY (BID ID -3115240)

M/S Sukhmani Construction Co. (BID ID -3114126)

M/S VED PAUL MAHAJAN (BID ID -3126216)