REPAIR REPLACEMENT OVERHEAD, TWO POLE FOUR POLES STRUCTURE, GRASS CLEANING, LA EARTHING, BARRACKS AND OTHER CONNECTED ITEMS AT MIL STN GAYA

Dismantling of unserviceable S & F in replacement Cross arms, bracings, supports, clamps and back plates fabricated from and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of silver / aluminium paint complete all as specified and directed.

M&L for Painting of steel tubular pole 9.0/11 metre long (2 pole/4 pole structure), by applying two coat of aluminium paint after scraping / brushing and cleaning the rust on pole and cross arms. Aluminium painting will be done on pole above 1.5 metre height from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enameled paint (30 Cms each). Pole Nos will be written on pole by black paint in white circle of 150mm dia, complete, all as specified and directed. Note:- Only one coat will be applied at one time and payment at 50% of coated rate to be applied at the first time of first coat. Second coat is to be done more than 30 days after first coat.

M&L for servicing and greasing of mechanical parts of existing 11KV horizontal/vertical type GOD including replacement of parts i.e Male/female contact, jumper ,operating mechanism, GOD rod etc specified and directed .

Taking down old UNSV ACSR conductor, any type and size from the poles and supply and fixing new ACSR conductor including stringing on LT poles complete including aluminium binding wires, jumpering, bindings at insulators etc, complete, all as specified and directed.

M&L for anti-climbing device, spikes type fabricated out of MS bars (round,square and flat) including nuts,bolts,washer and welding in two halves made to shape to suit the cross section of the pole.

S&F Pin type insulator, vitreous porcelain white , brown, green insulator including one galvanised mild steei sprindle two galvanised washers and one galvanised iron nut,100mm height,65mm dia for 1100 volts grade complete, all as specified and directed.

Supply and fix in replacement of MCB 4pole isolater TPN 80/100 Amps capacity AC 415 Volts complete all as specified and directed

M & L Galvanised iron steel tubes, ISI marked light grade of size 50mm bore for cable protection along the poles under road /drains complete all as directed.

M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in road crossing, copping/collar of poles and foundation of stay assembly etc complete all as specified and directed.

M & L for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in copping of poles including taking down old PCC copping of poles all as specified and directed.