ADDING 02 NOS. 33KV SIRSABIBA MAU AND SARAIBHUPAT FEEDER BAY INCLUDING DISMENTLING AND ERECTION ALSO OF 02 NOS. 2X10MVAR, 33 KV CAPACITOR BANK AND EXTENSION OF 33 KV MAIN AND TRANSFER BUS AT 132 KV SUBSTATION JASWANTNAGAR UNDER ETD, ETAWAH .

Dismentling of 2x10 MVAR Capacitor Bank Unistar Make Complete comprises with following equipments properly including all cost of Men, Material and T&P etc.

33 KV Series Reactor

33 KV NCT

33 KV Isolator

33 KV 1x5MVAR Cap. Bank

33 KV CT with junction Box

33 KV PT with junction Box

33 KV CB with Structure

33 KV 3 Phase PT

Dismentling of Substation structure i.e. ALP(10 NO.), ABL(5NO.), CCM(8 NO.), CGM(4 NO.), BCT (1 NO.), CPM(4) etc.

Dismentling of Jumpers(ASCR Panther) from Bus to Equipment and Equipment to Equipment Safely. All Clamps must be in reusable condition.

Destringing of 33 Kv Bus Bar(1x Panther Conductor) R,Y,B Phase for Cap Bank Approx 18 Mtr and 6 Mtr

Laying and Stringing of 33 Kv Bus Bar of Panther Conductor for Cap Bank of following length of span mentioned below including fitting of tension fittings, hoisting of Insulators, cutting of conductor and shifting of all material from store to working site and other assocaiated work to complete the job satisfactorily (1 No. of each phase) (a) Approx 18Mtr

Erection of Substation Structures(EKR-2NO ,BBR-02NO ,YMR-2NO ,CCM-14NO ,CGM-7NO ,CPM-07 NO ,ALP-19NO ,ABL-13 NO ,BCT-1 NO) etc at 132 KV S/S Jaswantnagar.The Job includes shifting of all material from store to site then erection of structures as per drawing using proper size of Nuts and Bolts and Washer Which will be Provided by UPPTCL. All men and T&P required for Satisfactory completion of work shall be arranged by the contractor.

Stringing of 33kv bus bar extension of main (1xMoose ACSR) and transfer bus (1xpanther conductor ) of following length of span mentioned below including fitting of tension fittings, hoisting of insulators, cutting of conductor and shifting of all material from store to switchyard and other associated work to complete the job satisfactorily. ( 01 No. of each phase) (a). Approx 20 Mtr.

Erection of following equipments as per instruction manual and technical specification including shifting of material from store to working site including all other associated work to complete the job satisfactorily.

33 KV VCB With Structures

33 KV Bus Isolator

33 KV Line Isolator

33 KV CT With Juction Box

33 KV PT With Junction Box

33 KV 3 Phase PT

33 KV 1x5 MVAR Capacitor Cell Including Structures

33 KV Series Reactor

33 KV NCT

33 KV Tripple Feeder C&R Panel SAS

Jumpering of Equipments between Bus bar to BSI, BSI to CB, CB to CT, CT to LSI and Capacitor Bank and NCT by Twin/Single ACSR Panther Conductor (02 Nos cap. bank bay and 02 Nos 33kv feeder bay )

Earthing of Equipments and various Structure at two Places, one is Structure and other is equipments including laying of 50x6 mm and 25x6mm MS Flat,Excavation of earth upto 0.6 Mtr below the ground level.Cutting and Welding with Earth Mat with all Cost of T&P and Man Power . (MS Flat will be provided by UPPTCL free of cost)

50x6 mm MS Flat

25X6mm MS Flat

Painting of earthing strips above ground level with one coat of red oxide and two coat of synthetic enamel paint & with black bitumen paint below ground level

50x6 mm MS Flat ( in green colour )

25X6mm MS Flat ( in green colour )

Laying of following size control cable in the cable trench from various equipments to control room / J.B. with proper dressing and saddling of cables at every 75mm distance with MS/aluminium saddle of size 25x3mm including carriage of cable drums from store to site and shifting back to store and fixing of cable tray as per cable schedule .

2x2.5 sq mm

4x2.5 sq mm

6x2.5 sq mm

Termination of following size control Cable as laid of as per cable schedule including making necessary holes in glands plate of panel/ box wherever required. supply and fixing of cable glands, ferrule of appropriate size and no. respectively for each core of cable and its termination with crimping type lugs and all associated work to complete the job satisfactory ( All Required Material, Labour and T&P will be arranged by Contractor at his own cost.(cable will be used of size 2x2.5sqmm+4x2.5qmm+6x2.5sqmm)

Providing and Fixing of New Generation Energy & Environment friendly long aluminium outdoor beam street Light with high power 120 watt LEDs as light source suitable for 230V AC input supply of CGL/Havels/Philips/Bajaj Make .

laying of 2/4 x2.5 sq mm PVC control cable for periphery lighting, the job also including the excavation for tench and below 0.4mtr and laid the cable in the trench and filling the sand on the cable then covering the same by brick .

Fixing of 6,10 amp single phase MCB in lighting cubical junction Box .The Job includes proper wiring work etc including all material, labour ,T&P for proper Completion of work.

Providing and fixing of jucntion box MCB type with structure for cable lighting termination work

Providing and fixing of 33kv feeder name plate of 2mm thick aluminium sheet plate size 400x200mm with covering Retro reflecting sheet base green colour and write feeder name by white colour

Loading of 2x2.5sq mm / 4x2.5sq mm/6x2.5sq mm copper control cable drum (05 Nos) at 132kv /220kv s/s within 82Km under ETD, Etawah

Carriage of 2x2.5sq mm / 4x2.5sq mm/6x2.5sq mm copper control cable drum (05 Nos) from 132kv /220kv s/s to 132kv s/s Jaswantnagar within 82Km under ETD, Etawah

Unloading of 2x2.5sq mm / 4x2.5sq mm/6x2.5sq mm copper control cable drum (05 Nos) at 132kv s/s Jaswantnagar

Configuration & Integration of 33 KV New bay with existing Siemens Make SCADA system for Operation and Measurements from Control room Including data transmission to SLDC Lucknow and backup to ALDC Modipuram.

Supply

Single tension fitting Moose conductor

Single suspension fitting for Moose conductor

Single suspension fitting for Panther conductor

PG Clamp Panther to Panther

PG Clamp Moose to Panther

PG Clamp Moose to Moose

Spacer Panther to Panther

Copper Bond