Providing RCC Platform with connected civil works for housing instruments (Protein estimate unit) at lab No.15 (1st floor) TFAN, PCT block and Annual painting works (Internal) for FPIC department CSIR-CFTRI, Mysuru

Making rough of the existing flooring surface by scrapping and using mechanical and means preparing the surface rough for laying flooring tile.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.00 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 M sand)

15 mm cement plaster on rough side of single or half brick wall of mix including scaffolding at all heights: 1:4 (1 cement: 4 M sand)

Centering and shuttering including strutting, propping etc. and removal of form. Quote including scaffolding at all heights for : Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. MAKE: TATA/ JSW

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 M sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 M sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and fixing 18 mm thick gang saw cut, antiskid finish, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias staircase steps and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 M sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding, nosing and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour jet black, Cherry/Ruby red/ light brown/ or any colour as instructed by Engineer-in-charge Area of slab over 0.50 sqm

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste coupling and 40mm C.P. brass tap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required Size 600x450x200 mm MAKE: CERA/ PARRYWARE/HINDWARE or its equivalent

Providing and fixing Stainless steel swan neck / 3way nozzle tap for laboratory sink Make: Hindware, Cera or its equivalent

Providing and fixing CP Coated Brass Angle cock 15 mm Make: ONIDA or its equivalent

Polishing on wood work with ready made touch wood of approved brand and manufacture : Old work, one or more coat Make: asian

Providing & Fixing (on existing door shutter) decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. Note: rate quoted is inclusive of removal of old existing decorative sheet. 1.5 mm thick Make: Greelam / Century or its equivilent

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete Note: Rate include all scaffolding at all heights

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. Rate include all scaffolding at all heights With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre MAKE: asian/ NEROLAC/ Dulux

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Voatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour: Rate include all scaffolding at all heights One of more coats MAKE: asian/ NEROLAC/ Dulux

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work MAKE: asian - apcolite gloss enamel OR Nerolac – synthetic enamel OR Dulux - Gloss enamel

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Rate include all scaffolding at all heights Old work (one or more coats applied @ 0.83 ltr/10 sqm). MAKE: asian (Apex) or Nerolac

Painting with aluminium paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work MAKE: asian - apcolite gloss enamel OR Nerolac

Applying with floor guard paint (two or more coats) as per manufacturer's specifications over one coat of primer after preparation of floor surface including cleaning, sanding & filling the cracks using crack seal etc. complete as directed Engineer-in-charge in approved colour pattern and shade. On cement floor Brand : Floor guard paint: asian - apex floor guard Primer : asian - SmartCare Primero

Providing and fixing CP Coated Brass Angle cock 15 mm Make: ONIDA or its equivalent