REPAIR/REPLACEMENT TO SANITARY AND PLUMBING FITTING, REPAIR TO GRIT WASH PLASTER IN MD ACCN (MAP ZONE-V AREA) UNDER AGE B/R-IV OF GE (SOUTH) MEERUT CANTT

Amount

Material and labour for rectifying the leakage of bib taps/stop cock/angle valve/pillar taps/angle cock by replacing rubber /PVC washer of required size complete all as specified and directed by Engr-in-Charge

Material and labour for rectifying the leakage of wall mixer/wash basin mixer/sink mixer of any type by replacing rubber /PVC washer of required size complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair CP brass leg of suitable size and shape for wash basin mixer /wall mixer/sink mixer of existing make as per site of MAP Qtrs complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair brass spindle of suitable size and shape for stop cock/angle cock/bib cock of existing make as per site of MAP Qtrs complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair CP brass extension nipple of size 25mm to 50mm as per site of MAP Qtrs/ as per sample complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair CP brass jet spray superior quality with flexible PVC pipe of standard length complete all as specified and directed.

Supply and fix in repair chromium plated brass jet health faucet /hand shower including PVC flexible pipe of 1.50m length and holding brackets, screws etc complete all as specified and directed.

Supply and fix in repair chromium plated brass toilet paper holder fixed with CP brass screws and rawl plug complete all as specified and directed.

Supply and fix in repair chromium plated brass soap dish size 100x70mm and 1mm thick fixed with CP brass screws and rawl plug complete all as specified and directed.

Supply and fix in repair fancy type long neck bib taps, cast copper alloy ,chromium plated ,long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

Supply and fix in repair 15 mm dia angle cock, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron or for union including CP flange complete all as specified and directed.

Supply and fix in repair 15 mm dia two way bib cock/angle cock, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron or for union including CP flange complete all as specified and directed.

Supply and fix in repair pillar taps, fancy type ,15mm dia cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair 15 mm bore concealed stop cock, cast copper alloy, chromium plated , fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron and with CP brass flange complete all as specified and directed.

Supply and fix in repair CP brass shower arm 195 mm long with bend of 45 degree for fixing with 15mm bore pipe complete all as specified and directed.

Supply and fix in repair CP brass waste fitting 32/40 mm for glazed were wash basin, sink with long screw shanks & fly nuts, flanges and bedded in red lead cement and other end fixed for 40mm bore pipe complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair wall mixer fancy type cast copper alloy ,chromium plated for mixing hot and cold water , screwed for iron pipe suitable for 15 mm bore pipe complete all as specified and directed.

Supply and fix in repair kitchen sink mixer with swinging casted spout , cast copper alloy ,chromium plated for mixing hot and cold water , screwed for iron pipe suitable for 15 mm bore pipe complete all as specified and directed.

Supply and fix in repair WHB central hole mixer cast copper alloy ,chromium plated for mixing hot and cold water , screwed for iron pipe suitable for 15 mm bore pipe complete all as specified and directed.

Supply and fix in repair PVC seat cover suitable for Anglo Indian water closet black flat and fixed with mild steel chromium plated hinging device complete all as specified and directed.

Supply and fix in repair PVC seat cover suitable for water closet, back flat and fixed with mild steel chromium plated hinging device complete all as specified and directed.

Supply and fix in repair PVC waste pipe of 32/40mm bore suitable for WHB/Sink complete all as specified & directed.

Supply and fix in repair complete internal fitting for PVC low level flushing cistern suitable complete all as specified & directed by Engr-in-Charge .

Supply and Fix in repair 20 mm bore, PTMT ball valves, high pressure with polyethylene float and fly nut, including epoxy coated aluminium rod, screwed for iron pipe or for brass ferrule complete all as specified and directed.( Min wt -210 grams )

Supply and fix in repair PVC Lid/cover for PVC water tank of capacity 500/1000 ltr suitable for existing water tanks complete all as specified & directed by Engr-in-Charge .

Supply and fix in repair tank lid/cover made out with .80mm th PGI sheet , 470mm dia including 4 side fastening arrangement with nut and washer having exposed surfaces sharp edge 08 No stings by cutting/rivetting of PGI sheet to protect by monkey menance complete as per sample for water tank of capacity 500/1000 ltr complete all as specified & directed by Engr-in-Charge .

Supply & fixing in repair PVC connections of 450mm long suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified & directed.( Note for BOQ item 1.00 to 27.00:- (i) work for these items shall be carried out by the contractor within 24 Hrs of intimation (ii) contractor/his rep shall note down these work location every day at 900Hrs from the B/R -IV sub divn office (iii) pucca bound register for this regard shall be maintained by contractor and during payment and after completion shall be deposited with Engr-Charge duly signed by all concerned.

Supply and fix in repair 15mm bore GI water tubing ,galvanised, medium grade, with all fittings fix to wall , ceilings or laid in floor including taking up or down old GI tubing and connection complete all as specified and directed

All as per item No 28.00 above but 20mm bore GI tubing complete all as specified and directed.

Cutting chases pinning in, in brick walls, making good to facing where required & pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and making good, cutting not exc 10 cm girth all as directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8 type D-2 , minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pedestal pattern white and trap including connection to drain or outgoing pipe and flushing pipe, antisyphonage pipe etc and making good to floor finishes to match the existing complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet semi pedestal pattern ( anglo indian type ) white with P or S trap excluding flushing cistern and flush pipe but including connection to drain or outgoing pipe and flushing pipe etc and making good to floor finishes to match the existing complete all as specified and directed.

Supply and fix in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity low level, white with inlet, ball valve float,flush pipe and handles including brackets fixing plug and 60mm long brass screws etc complete all as specified and directed

Supply and fix in repair glass shelf assembly fancy type made of 5 to 6 mm thick sheet glass of size 600mmx120mm fixed with chromium plated brackets complete all as specified and directed.

Supply and fix in repair glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.

Supply and fix in repair vitreous china, wash hand basin, white, flat back, size 550 x 400 mm including brackets, brass chromium plated waste fitting and PVC waste pipe of 32 mm dia complete all as specified and directed.

Supply & fix in repair tubular towel rail of 20mm dia of brass, chromium plate, ’D’ type, 600 mm long between flanges complete all as specified & directed.

Supply and fix in repairs sink with draining board made of stainless steel 1.00mm thick for kitchen with lug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes overall size 940mmx460mm, bowl size 405mmx354mmx178mm complete all as specified and directed.

Supply and fix in repair stainless steel plate rack 0.63 mm thick stainless steel of size 900mmx600mmx250mm with all internal fittings (as per sample) approved by Engr-in-Charge complete all as specified and directed.

Supply and fixing hoisted and fixed in position rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity including 20 mm dia PVC float valve of PTMT ( Min wt-219 Gms) , wash out pipe and other fittings and including dismantling existing unserviceable water storage tank complete all as specified and directed.

Supply and fixing hoisted and fixed in position rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity including 20 mm dia PVC float valve of PTMT ( Min wt-219 Gms) , wash out pipe and other fittings and including dismantling existing unsv water storage tank complete all as specified and directed.

Supply and fixed gun metal ball valves (quarter turn type) 15mm dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

All as per item No 44.00 but 20mm dia complete all as specified and directed.

Supply & fix non skid glazed ceramic coloured tiles 7/8mm thick , area of each tiles exc 0.11 Sqm and n.exc0.18 Sqm as in floors, etc set and jointed in neat cement slurry and pointed in white/colour cement to match including, 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed.

Supply & fix non skid glazed ceramic coloured tiles 7/8mm thick , area of each tiles exc 0.18 Sqm and n.exc 0.36 Sqm as in floors, etc set and jointed in neat cement slurry and pointed in white/colour cement to match including 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed.

All as per item No 46.00 & 47.00 above but as in skirting over and including 10mm thick rendering in CM1:4 complete all as specified and directed.

M&L cloured Glazed ceramic tiles in vertical surfaces 350x250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or cloured cement to match over 10mm thick plaster in CM (1:4) on fair face of brick or concrete surface complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

Taking down grit plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

Material and labour for rendering, 15 mm thick in cement mortar (1:4) or fair faces of brick wall finished even and fair including taking down cement plaster on birck work or stone walls etc including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for Washed stone grit plaster on exterior walls in two layers, under layer 15mm thick ( average) in cement plaster 1:4 (1 cement: 4 Coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 Cement(appx 35 % white and 65% grey) with reflectance 50+1% or silver cement of co like M/s shriram cement works with reflectance: ½ coarse sand :2 stone chipping 12mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water mixed with H2SO4 @ 5% to expose the stone chippings complete all as specified .

Material and labour for preparation of newly plastered wall surfaces and applyng two coats of oil bound distemper over a coat of wall care putty 1.00 mm thick ( JK/Birla) complete all as specified and directed .

Material and labour for complete removal of finishes from wall surfaces and applyng two coats of oil bound distemper over a coat of wall care putty 1.00 mm thick ( JK/Birla) complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed.

Supply and fixing FRP moulded door frame of 100mmx60mm ,laminated with inner core of seasoned and treated rubber wood or any other suitable material and outer core of average 2mm thick FRP having single rebate of 32x15mm to receive shutters of 30mm thick with gel coat finish complete all as per existing at site /as per sample complete all as specified and directed by Engr-in-Charge.

Supply and fixing factory made FRP door shutter of 30mm th , made of unsaturated polyster resin moulded to 2.5mm FRP laminate for forming hollow rails and stiles, suitably seasoned and treated rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5mm FRP laminate for panels with gelcoat finish and with an average weight of 8 Kg per Sqm complete all as per existing at site /as per sample complete all as specified and directed by Engr-in-Charge.

Supply and fixing 100mm long stainless steel butt hinges complete all as specified and as directed.

Material and labour for resecuring or easing & adjusting wooden/steel/FRP door hinges or welding or drilling out old screws and securing with new screws to make door in serviceable condition complete all as specified and directed by Engr-in-Charge.

Supply & fix 200mm long aluminium anodized skeleton tower bolts with plate, staples and bolt of extruded section complete all as specified and directed.

Supply and fixing in repair 150mm long extrude aluminium alloy handles, febricated type extruded section, ISI marked all as specified and directed.

Supply & fix 250mm long aluminium alloy,anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Material and labour for cutting holes in brick walls built in CM for inserting holdfast,depth of embeded portion of holdfast exc half brick butt n.exc one brick and making good dismantled portion in PCC block 1:2:4 type B1 using 20mm graded stone aggregate and match the surfaces to the existing surfaces complete all as specified and directed.

Supply & fixing in repair 3mm thick, sheet glass ordinary quality and glazing with oil putty or with beads in square not exc 0.50 sqm in each pane including hacking out old broken glasses complete all as specified & directed.

All as per item No 65.00 above but 4 mm thick figured pin headed glass complete all as specified and directed.

Supply & fixing in repair 5.50 mm thick, sheet glass ordinary quality and fixed with rubber beads in square not exc 0.50 sqm in each pane as in aluminium windows/doors including taking out old broken glasses complete all as specified & directed.( Note:- Rubber beads shall be paid under respective item of BOQ as supply only.)

Supply only rubber beads suitable for aluminium door and windows for fixing of glass pane as per sample complete all as spd and directed by Engr-in-Charge.

Supply and fixing in repair solid PVC plyboard 18mm thick as in cup board shelf, sag free thermal and electrically insulated, light wt wrap free, impact resistance, fire resistant, termite resistant, chemically resistant and smell free including dismantling of old unsv boarding any description fixed in any position with nail complete all as spd and directed by Engr-in-Charge.

Supply and fix in repair auto hinges for cabinet case complete all as specified and directed. (Make: KARF/HETICH).

Supply and fix in repair 125 mm size stainless steel bright finish handle for PVC cup board shutter fixed with steel screws complete all as specified and directed.

SHAKTI CONSTRUCTION CO

Abhi Associates

M/S AGARWAL CONSTRUCTION CO.