Hotmixing of internal roads at Bethora Industrial Estate.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees grith upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORTH SPecification 201 By Manual Means In area of light jungle

Earthwork in excavation by mechanical means (hydraulic excavator) in foundation pipeline trenches drain (not exceeding 1.5m in width or 10 sq. m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All types of Ordinary rock including all types of laterite rock, blasting prohibited

Raising side shoulders with hard murrum including spreading watering and consolidation Supplying of laterite stone soling of size 150-200 mm size and murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading, watering and consolidation of binding material etc.(Measurements shall be considered on finished item) .

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density.as per MORTH Specification 404 By Manual Means Grade - II

Providing and laying 50mm(consolidated thickness)full grout using granitic or basaltic stone of specified grading at 6.00 cu.m. per 100 sq.m. grouting with hot bitumen straight run bitumen(or with such bituminous material of grade and type as specified by the Engineer-in-Charge)at 5.0kg. per sq. m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq.m. including Providing and laying seal coat sealing the voids in a bituminious surface laid with F.E loader with 1 Cu.m. bucket capacity to the specified levels, grade and cross fall using Type A seal coat with 0.98 kg/sqm of bitumen of grade as per MoRT&H specifications clause 513.

Cleaning of the existing black topped surface with brooms, soft brushes and finally dusting with old gunny bags and/or compressed air to receive bituminous treatment. etc. complete

Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503. Bitumen 80/100@ 0.375 kg/sq.m

Providing and laying dense graded bituminious macadam with 40-60 TPH Drum Mix type HMP producing an average output of 50 tonne per hour using crushed aggregates of specified grading, premixed with bituminious binder by specified percentage of weight of total mix and filler, transporting the hotmix to work site, with all leads laying with a hydrostatic /hydraulic paver finisher with sensor to control the required grade, level and alignment, rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction using antistripping agent complete as per MoRT&H Specifications Clause 507 Grade-II (19mm nominal size) Bitumen @ 5% of weight of mix Antistripping agent @ 0.5% of bitumen content

Providing and laying 30 mm thick Bituminious/Asphaltic concrete with 40-60 batch type HMP producing an average output of 50 tonnes per hour using crushed aggregates of specified gradings Premixed with bituminious binder at 6.5 % by weight of total mix and filler using Antistripping agent transporting the hotmix to work site with all leads and applying a tack coat @f 2.00 kg/10sq.m. with hot bitumen of 80/100 and laying with hydrostatic/hydraulic power finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction complete as per MORT&H specifications clause 509 and 503 Antistripping agent @ 0.5% of bitumen content

Raising side shoulders with hard murrum including spreading watering and consolidation Murrum from borow puit